• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

2 x ELM 18 EX Flexible Cuff for ERM 181 x Duct Termination with Mesh - 355mm1 x RUCK MTP 20, 10K, Speed control1 x Duct Termination with Mesh - 450mm1 x DDMP 12-12 3F 5700W M6M0 DG72 x Silentub - STUB 2001 x CBS-100 Outlet Flange for CBT-1001 x DDMP 12-09 1F 1800W M6A4 DA82 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x TUNE-R-160-3-M2 - Control Damper1 x RUCK MTP 30, Stepped Speed control3 x Duct Termination with Mesh - 315mm3 x Vent Axia T-Series Wall Model TX9WL1 x Potentiometer EGH 01 - for DDMP Fans4 x 220x90mm x 1m Insulated Rectangular Duct1 x RDH Flange - 03151 x ELTA - Three Phase Transformer 3amps3 x Chaysol DA 9/9 3 speed2 x GRA-100 External Grill by S&P3 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)4 x DDMP 12-12 1F 1800W M6A4 DA83 x CAD-COMPACT 500 ADVANCED N8 - MVHR unit5 x Vent Axia W300310 Controller Electronic 1.5A2 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan2 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x KBA- Inlet Mounting 1803 x Elta Turboflow-TF - 450mm - Single phase4 x DDMP 10-08 1F 1000W M6A2 DA51 x TecFire Intumescent Damper - Rectangular 400x400mm1 x SDD-U Anti Vibration Pads2 x Duct Termination with Mesh - 200mm2 x Run On Timer - 5s - 4hrs - RT5A3 x KRJ - 120 Inlet Guard for CBB/CBT fans4 x VA 9/2 T - High Temp Axial Fan,1 x KBA- Inlet Mounting 3154 x DDMP 10-08 FLANGE4 x 125mm Round Connector with Damper1 x ACO3/BD Changover Panel (Three Phase)2 x ELTA - Single Phase Transformer 2amps2 x RDH Flange - 04001 x TD ECOWATT 800/200 Inline Duct Fan - TD-ECOWATT2 x 204x60mm x 1m Insulated Rectangular Duct4 x Spiral end cap - 80mm2 x Flat Roof Terminal -OFT 5 - EPDM1 x ADH E0-450 Flange - 0450 ADHE/RDHE2 x SQUARE MIXED FLOW FAN - MFQ 560mm (Three Phase)4 x ELTA - Single Phase Transformer 8amps1 x TUNE-R-560-2-M1 - Control Damper5 x CBT-100N Centrifugal ATEX II 2G Exe II T32 x Purlin Box 800 for RAW Cowls2 x Universal Pipe Fixing Clip2 x Elta Skyflow SSRL710-1EC3 x DDMP 09-09 1F 1000W M6A1 DA54 x Ancillary Pack for SLC-4001 x CBA-160 Inlet Flange for CBT-1606 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Quadro Micro 100 Filters - Individual3 x Slimline 150 High Efficiency, Low Profile Heat Recovery Unit4 x RDH Flange - 04502 x Elta Quietflow Twin SQT200-1ECL1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase5 x Atex Inline Fan 180mm - ERM18EXE3 x CBM 7/9 4p 300W RE-VR4 x Chaysol da 9-7 - 3 Speed2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase6 x CBT-130N Centrifugal2 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT1 x Spare filter for Energi Sava 380 HR unit2 x RDH Flange - 02503 x Flanged Damper 019-0500-STD1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Spiral Ducting 1 meter - 200mm2 x Elta SCP450/4-1AC - IP551 x EM30-24 Control Panel Commissioning Service2 x DDMP 09/07 Mounting Flange2 x KBD- outlet mounting flange for CRMT 3551 x Elta Quietflow Twin SQT125-1ECL2 x Elta Quietflow Twin SQT150-1ECL3 x Elta SCP500/4-3AC - IP552 x CBM 9/7 4p 420W RE-VR3 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan5 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting3 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm2 x CBM Low Pressure Centrifugal Fan - CBM 12/9 6 Pole 736watt C1 x Same Day Shipping Surcharge - City Sprint2 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)3 x Elta Standard Ambient Flexible Connector - 800mm1 x RF-100 G4 Grade Filter for S&P MVHR units1 x Elta SLC1000/4C-3AC - IP551 x EM30-24 Electro-Mechanical Control Panel1 x RF-100 F7 Grade Filter for S&P MVHR units4 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H2 x Elta SCP630/4-1AC - IP551 x AL 1120 Mounting Flange5 x CBA-130 Inlet Flange for CBT-1302 x FlameProof Plate Axial Fan - Single Phase - 15 inches - Eexd IIC T4 -4pole1 x IP65 Remote Speed Adjustment Station6 x CBT-130N Centrifugal ATEX II 2G Exd IIB T42 x ELTA - Single Phase Transformer 4amps2 x KRJ - 225 Inlet Guard2 x MV EC 100 Multivent3 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 400mm3 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer2 x Elta Standard Ambient Flexible Connector - 450mm1 x DDMP 10-10 FLANGE2 x Elta SLC560/4C-3AC - IP552 x BDS 200/250 RA b/d shutter1 x High Temperature Flexible Connector - 063-0630-PU2501 x LC080L43-A9-40 - Long Cased Axial5 x DDMP 12-09 FLANGE1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 100mm1 x Nicotra RDH E2-0200 (R)1 x Purlin Box 630/710 for RAW Cowls2 x Elta SCP350/4-1AC - IP555 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Nicotra RDH G2E7-04503 x Elta SLC500/4B-1AC - IP551 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)2 x CFI Lite 600 Carbon Filter4 x Elta SCP315/4-1AC - IP551 x CBT-170 Centrifugal1 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.1 x Side Withdrawal Casing - 1H x 1W - To suit 100 Panel and 292 HEPA1 x Impeller Side Guard - 800mm3 x Soaker Sheet to suit RA8001 x REB Ecowatt Speed Control - REB-ECO2 x 204x60mm Rectangular to 100mm Round Adaptor2 x Acoustic Box Fans (Inline) - CAB-355 RE2 x Helios VARW 450/4 - TK1 x DT-1 Duct Mounted Thermostat1 x CBS-160 Outlet Flange for CBT-1601 x Northern Ireland Pallet Surcharge1 x DDMP 12-12 FLANGE1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Chaysol Da 15/11 CMAL - 2200W 6 Pole - Closed Motor - Three Phase1 x Airvent ceiling fan controller4 x Helios PA10 Speed Potentiometer1 x F7 Mini-Cell panel filter - 594 x 5942 x Spiral Ducting 1 meter - 355mm1 x DPD 12PM Delivery Surcharge1 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC2 x Elta SPA400/4-1AC - IP543 x Elta Turboflow-TF - 630mm - Three phase1 x BDS 400/450 RA b/d shutter1 x CBM 7/9 6p 72W RE-VR1 x Spare filter pack for Energi Sava 210 HR unit1 x Impeller Side Guard - 450mm1 x DDMP 07-07 1F 1100W M6AO DA51 x MUB 062 630D4 Multibox3 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Ancillary Pack for SB-Biflow 315 model1 x Economy Airvent 100mm Fan with Timer2 x RD31S-4DW.6Q.AL - 121303 (Three Phase)1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x TD ECOWATT 2000/315 Inline Duct Fan - TD-ECOWATT1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 200mm1 x ERM180EXE Bracket2 x MEV Spider Additional Spigots1 x Ancillary Pack for SB-Biflow 250 model1 x D2E-146-AP47-752 x 220x90mm Insulated Rectangular T-Piece1 x CBP-9/9 LOW PRESSURE CENTRIFUGAL FAN1 x Elta Standard Ambient Flexible Connector - 350mm1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Silent 300 CZ Design PLUS Extractor Fan1 x Round ceiling diffuser 400mm1 x RTRD - Three Phase Speed Controller - 14 Amp1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x DV-ROF-V-225 Roof mounted unit1 x RDS 1 Helios Transformer Controller With Motor Protection1 x Rectangular Airbrick Adaptor1 x Control switch - CR1501 x Duct Termination with Mesh - 100mm3 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x OBD 450x450 - for use with 4WAY-5952 x Access Door for Circular Duct - 250 x 150 - SIZE 152 x ELTA - Three Phase Transformer 10amps2 x RD31S-4EW.6Q.AL - 122296 (Single Phase)1 x KRJ - 160 Inlet Guard for CBB/CBT fans1 x Vertical Cowl - RAV630/7101 x RTRD - Three Phase Speed Controller - 7 Amp2 x RTRD - Three Phase Speed Controller - 4 Amp2 x EC Trickle and boost module - IP561 x Biflow SB315-CON4-1 - High Temperature Bifurcated Fan2 x Elta SCP500/4-1AC - IP551 x ACQ-20012D Acoustic Inline Box Fan1 x Soler & Palau - Contra Rotating TCBTx2-450 - IP651 x Ducting 45 Degree Bend - 800mm1 x ELTA - Single Phase Transformer 12amps1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting4 x TDP-D Pressure Sensor with Display1 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x PML230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse2 x Helios HQW-200/2 - IP552 x Transformer (silent) speed controller - RE 5.0 Amp1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x BDS 800 RA b/d shutter1 x Transformer Speed Control - RTRE- 5.0Amp1 x SPI-200 C Iris damper1 x JPA-1100 Accessory Adapter Plate1 x Duct Termination with Mesh - 250mm1 x Flanged Damper 019-0560-STD1 x Access Door for Circular Duct - 400 x 300 - SIZE 452 x RDH E0-0400 Mounting Feet (pair)1 x DA 9/7 N2T1 x Kitchavent 2000 Odour control System - 18152521 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x TEM 035 - 5 Speed Transformer Speed Control1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Chaysol DA 7/7 NT (V600002)1 x Impeller Side Guard - 710mm1 x Elta Standard Ambient Flexible Connector - 710mm1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 6 Pole 373watt VR1 x KRJ - 280 Inlet Guard1 x Elta SCP315/4-3AC - IP551 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x 100mm Round 45 Degree Bend1 x 110 x 54mm Horizontal 90 Degree Bend1 x Stainless steel Mesh Grease Filter - 600x600x50 NON STD1 x Pallet Delivery Surcharge1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...