• Model:CBTR/2-562-9.2

CBTR/2-562-9.2kw

£ 3,620.99 (excl. VAT)

£ 4,345.19 (inc. VAT)

CBTR/2-562-9.2kw

Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC.
Casings are manufactured from lockform seam sheet steel with a tough grey colour, epoxy-polyester paint coating.
All models incorporate backward curved centrifugal impellers manufactured from electro-welded sheet steel and protected by a cold galvanizing process.
Wide range of accessories to ease the installation.
Available with three phase 2 pole motors.
Motors:
All motors are IP55, class F.
Electrical supply:
Three-phase 230/400V-50Hz up to 3kW and 400V-50Hz for higher motor powers,
Additional Information:
The scroll can be orientated in 8 different positions.
Standard supplied position: LG 270.
On request:
- Fan supplied in RD positions.
- Scroll drain hole.
- Scroll inspection door.
- Fan assembled without motor support. (MB versions - flange mounted motor B5).
- Stainless steel versions (AISI 304 or AISI 316, All of the fan or only the scroll and the impeller).
- High temperature versions, up to 250ºC (HT versions).
- Belt driven versions. - Explosion proof versions.
- Fan for 60Hz application.
- Fan fitted with 2-speed motor.
- Motor with PTC thermal protection.
- High efficiency motors (EFF1
1 x Elta 10 Amp Electronic single phase speed controller.2 x Helios TSW 10 Amp Transformer speed controller1 x EC6H - Reversible Group Fan Electronic Controller1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Helios TSW MCB Amp Transformer speed controller1 x COM-31 x ELTA - Single Phase Transformer 12amps1 x Elta 6 Amp Electronic single phase speed controller with TK2 x Remote Timer Control - 13511 x Elta 2 Amp Electronic single phase speed controller.1 x EFSC-6N- Single Phase Speed Control2 x Run On Timer - 5s - 4hrs - RT5A1 x 7 Day Programmable TIMECLOCK1 x Push Timer Switch - ZA41 x Time Delay Unit - DT20B1 x Helios TSW 1.5 Amp Transformer speed controller1 x TTC-2000 Three phase electric heater controller1 x EC-Vent control board1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent Room Unit1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6302 x Systemair Save Connect 2.0 Internet Module1 x Elta Wall Cowl SWC35/401 x Elta Wall Cowl SWC56/631 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC25/311 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Elta ACO Panel 149-ACO18B1 x Elta Louvre Shutter - 400mm1 x Jet Cowl - 315mm1 x Economy Airvent 100mm Fan with Timer1 x DV-ROF-V-225 Roof mounted unit1 x Single Deflection Grille 400mm with OBD damper1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x DV-ROF-V-315 Roof mounted unit1 x F7 Mini-Cell panel filter - 594 x 5941 x 18M - 80mm PVC flexible ducting1 x Manrose 150mm - XF150BP1 x Manrose T12 STANDARD Transformer- T12S1 x DPD 12PM Delivery Surcharge1 x Manrose 150mm - XF150BHP1 x Same Day Shipping Surcharge - City Sprint1 x Economy Airvent 100mm Fan with Timer & Shutter1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Economy Airvent 150mm Fan1 x D2E-146-AP47-75
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...