• Model:SAX30/12A

Classic SAX30/12A Window/Wall Mounted

£ 341.19 (excl. VAT)

£ 409.43 (inc. VAT)

12 inch window/wall fan.
Overview

Available in 2 sizes with a 5 speed reversible controller which allows a range of adjustment if duties are under or over achieving.

All versions have delay action, slow moving shutters.
A models can be wired for INTAKE ONLY, EXTRACT ONLY or EXTRACT OR INTAKE (with a double pole three position switch not supplied) and does not come with a controller.Refer to wiring diagrams for connection options.

AR and ARB models must be installed with the controller included in the box. Refer to wiring diagrams for connection options. These models have several modes of operation via the supplied controller; Extract (5 speeds), Intake (5 speeds) and Fan stopped with the shutters remaining open. The ARB version comes with a square wall liner.


The SAX is designed for installation into windows, panels, ceilings, as well as most solid or cavity walls.

Easy Installation
Designed and supplied with all the necessary fixings, which means «easy fix mounting by one installer alone for the complete installation of the fan.
Corrosion Resistance
Units are manufactured from shock proof, heat resistant white plastic with a temperature stability of 107Deg C, robust, durable and non corrosive, with internal and external finger proof grille.

Weather Resistance
Units are splash proof with IPX4 protection as required under current electrical regulations.

Warranty
Each SAX unit has a two year warranty.

Casing

Unit casings shall be manufactured from shockproof, heat resistant white plastic. The fans shall be suitable for installation into window, wall or ceiling mounted applications. All «built in units shall have a telescopic wall liner for installations between 240mm and 315mm and 5m 4 core cable to assist installation. All units have IPX4 protection and are splash proof as required under current electrical regulations.
Motors

Motors have sealed for life, self lubricating bearings which do not require ventilation. They are sealed in a housing, ensuring quiet operation of the fan. Motors shall be Class B insulated to EN 60034-5. Motors are connected in accordance with EN60335-1, double insulated with in-built thermal overload protection. The fan shall be suitable for operating temperatures up to +40DegC.
Impellers

Axial impellers shall be provided with fixed blade angles to meet the required duty. The impeller construction shall comprise of white plastic.
Quality Management

Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001. All SAX units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
PDF Files


Classic_SAX


Instruction Manual

1 x Multiflow SMB650/4-1AC1 x Belt Drive Cased Axial Fan - 710mm - H version1 x Soler & Palau HXM-200mm1 x SWF-100X Sidewall Mounted Extractor Fan1 x Helios AV100 External Wall Fan1 x 125mm Round Wall Plate1 x FAST-TRACK RANGE 75mm - Valve Adaptor 90° 125mm1 x FAST-TRACK RANGE 75mm - Straight Connector1 x EC-Vent Room Unit1 x AL 710 D4 01 - High Performance Long Cased Axial Fan1 x Kitchen Grease Filter - Mesh Type Non standard 275mm x 180mm x 22mm1 x Duct Fast Clamps - 355mm1 x SWF-150X Sidewall Mounted Extractor Fan1 x 125mm Round Condensation Trap1 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x ACO 149-ACO1/EDV1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EM30-24 Control Panel Commissioning Service1 x HRB/2-200-BPN1 x Duct Tape - Silver - DTape1 x Ducting Y Piece - 355mm1 x Elta SLC450/4-3AC - IP551 x Venturia Whole House Ventilation1 x AMD 355/2/2 High Pressure Long Cased Axial Fan1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x GXC9 - High Performance Extract Fan1 x SD-MUB Vibration pad set1 x Curved boot - 150mm1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Multiflow SMB550/4-1AC1 x CTI CVA-N 450 Outdoor cover for CVAB/T Fans1 x Activated Carbon Discarb Cell - 293H x 293W x 598Dmm1 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x Duct Fast Clamps - 100mm1 x IP65 Remote Speed Adjustment Station1 x Elta SLC450/2-1AC - IP551 x Raptor SDA450/4-1EC1 x EVL Filter G4 grade for PIV units1 x Elta Turboflow-TF - 450mm - Single phase1 x Metal Inline Fan - VENT-100NK1 x Control with reverse - CR3001 x PPF4 - Positive Pressure Supply Fan1 x Duct Termination with Mesh - 150mm1 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x Gorilla HVLSX701 x TLZ 450 R - A Outlet Mounting Flange1 x Anti Vibration Duct Suspension Rings - 160mm1 x Elta SLC500-1EC -IE5 Motor- IP551 x Elta Box Fan AV Mounts - 063-SEL03 (PACK of 4)1 x Elta SLC355-1EC -IE5 Motor- IP551 x Flanged Spigot - 150mm1 x Activated Carbon Discarb Cell - 598H x 598W x 598Dmm1 x Female Ducting Connector - 160mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...