Fire rated extractor fans and Smoke Extractor Fan Motors. Most normal fans only operate up to about 70 degrees Celsius, but these used when extra heat tolerance is required. Most have both a continuous and a maximum (for so many hours) rating.
The Bifurcated Case Axial range of fans has been specifically developed to meet the need for an axial fan which can handle atmospheres normally detrimental to the life of the fan motor.
By isolatin...
The Bifurcated Case Axial range of fans has been specifically developed to meet the need for an axial fan which can handle atmospheres normally detrimental to the life of the fan motor.
By isolatin...
High efficiency duct axial fans designed for high temperature smoke extraction.
CC SHT fans are specifically dimensioned in a standard range suitable for the performance ratings which are normally re...
High efficiency duct axial fans designed for high temperature smoke extraction.
This is 4 pole version rated at F300/120.(300 Degrees C for 2 hours)
CC SHT fans are specifically dimensioned in a sta...
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning.
High Temperature
Motors are situ...
DVG-H 315D4 - Smoke extract roof unit
*Horizontal exhaust
*Smoke and heat extract unit + normal ventilation
*Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
*Normal ventilation up to 120°C...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
ILHT/4-500 MV (230/400V50HZ) N8
Range of direct-driven rectangular in-line fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked). All models are suitable for air st...
ILHT/4-560 MV (230/400V50HZ) N8
Range of direct-driven rectangular in-line fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked). All models are suitable for air s...
High efficiency duct axial fans designed for high temperature smoke extraction.
This is 4 pole version rated at F400/120.(400 Degrees C for 2 hours)
CC SHT fans are specifically dimensioned in a sta...
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kitchens if used...
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kitchens if used...
THREE PHASE
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kit...
THREE PHASE
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kit...
THREE PHASE
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kit...
DV-EX 450D4 Roof fan ATEX
Centrifugal roof fan, explosion proof, II 2G Ex h IIB+H2 T3 Gb.
Certified according to ATEX 2014/34/EU.
Speed-controllable, Integral thermistors (PTC *)
The DVEX models h...
Heat Resistant In-line Axial Fans - VO 135 Series - High Temperature 150°C
The VO Series high temperature fans are designed
to resist up to 150°C.
noiseless and highly efficient electric m...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
In accordance with Commission Regulation (EC) no 640/2009 of the European Parliament - eco-design requirements for electric motors - the new international efficiency classes are binding as of 16 June ...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
A range of bifurcated axial fans, specially developed with motor out of the airstream to handle more hostile air movement applications.
Max Duty - 972m3/hr
Speed RPM - 1370
Three Phase - 380V to 4...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...