Fire rated extractor fans and Smoke Extractor Fan Motors. Most normal fans only operate up to about 70 degrees Celsius, but these used when extra heat tolerance is required. Most have both a continuous and a maximum (for so many hours) rating.
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning.
High Temperature
Motors are situ...
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning.
High Temperature
Motors are situ...
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kitchens if used...
DVG-H 315D4 - Smoke extract roof unit
*Horizontal exhaust
*Smoke and heat extract unit + normal ventilation
*Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
*Normal ventilation up to 120°C...
A range of bifurcated axial fans, specially developed with motor out of the airstream to handle more hostile air movement applications.
Max Duty - 1,008m3/hr
Speed RPM - 1450
Single Phase - 220V t...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
The KBT fans have impellers manufactured from galvanised sheet steel with forward-curved blades. The casing is manufactured from double-skinned galvanised sheet steel and is insulated with 50 mm miner...
THREE PHASE
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kit...
Smoke extract axial fan AXC(B):
- Certified according to EN 12101-3 for 300°C/120 min.
- CE mark of conformity.
- Suitable for use inside or outside the fire zone. Temperature of medium for contin...
A range of bifurcated axial fans, specially developed with motor out of the airstream to handle more hostile air movement applications.
Max Duty - 1,875.6m3/hr
Speed RPM - 1370
Single Phase - 220V...
A range of bifurcated axial fans, specially developed with motor out of the airstream to handle more hostile air movement applications.
Max Duty - 972m3/hr
Speed RPM - 1370
Three Phase - 380V to 4...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
A range of bifurcated axial fans, specially developed with motor out of the airstream to handle more hostile air movement applications.
Max Duty - 2,037.6m3/hr
Speed RPM - 2780
Three Phase - 380V ...
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning.
High Temperature
Motors are situ...
The Bifurcated Case Axial range of fans has been specifically developed to meet the need for an axial fan which can handle atmospheres normally detrimental to the life of the fan motor.
By isolatin...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
In accordance with Commission Regulation (EC) no 640/2009 of the European Parliament - eco-design requirements for electric motors - the new international efficiency classes are binding as of 16 June ...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
ILHT/6-035 *230/400V 50*
Range of direct-driven rectangular in-line fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked). All models are suitable for air stream te...