Fire rated extractor fans and Smoke Extractor Fan Motors. Most normal fans only operate up to about 70 degrees Celsius, but these used when extra heat tolerance is required. Most have both a continuous and a maximum (for so many hours) rating.
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning.
High Temperature
Motors are situ...
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning.
High Temperature
Motors are situ...
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kitchens if used...
THREE PHASE
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1)
Also suitable for kit...
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
In accordance with Commission Regulation (EC) no 640/2009 of the European Parliament - eco-design requirements for electric motors - the new international efficiency classes are binding as of 16 June ...
Smoke extract axial fan Series AXC(B), tested according to EN 12101-3 for 300°C-120min - AXC 1000-10/22°-4 (B) (15.0Kw)
The Systemair AXC(B) range of long cased medium pressure axial fans is ava...
Smoke extract axial fan AXC(B):
- Certified according to EN 12101-3 for 300°C/120 min.
- CE mark of conformity.
- Suitable for use inside or outside the fire zone. Temperature of medium for contin...
Smoke extract axial fan AXC(B):
- Certified according to EN 12101-3 for 300°C/120 min.
- CE mark of conformity.
- Suitable for use inside or outside the fire zone. Temperature of medium for contin...
• Aerofoil impeller with adjustable pitch angle
• Die cast aluminium hub and blades
• Bifurcated casing, hot dip galvanized steel, to EN ISO 1461
• flangesholes according Eurovent 1/2
• ...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
High efficiency duct axial fans designed for high temperature smoke extraction.
CC SHT fans are specifically dimensioned in a standard range suitable for the performance ratings which are normally re...
High efficiency duct axial fans designed for high temperature smoke extraction.
This is 4 pole version rated at F300/120.(300 Degrees C for 2 hours)
CC SHT fans are specifically dimensioned in a sta...
Range of adjustable pitch aerofoil blade, axial flow cabinet fans designed for
smoke extraction in fire conditions and
certified F400-120 and F300-120
(CE marked)....
Range of adjustable pitch aerofoil blade, axial flow cabinet fans designed for
smoke extraction in fire conditions and
certified F400-120 and F300-120
(CE marked)....
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow.
Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
Application:
Extraction of pollutants in professional kitchens.
Installation in all positions and connection on all faces. Air stream temperature up to 120°C in continuous with motor at 40ºC max. ...
Application:
Extraction of pollutants in professional kitchens.
Installation in all positions and connection on all faces. Air stream temperature up to 120°C in continuous with motor at 40ºC max. ...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.
M...