Smoke Extract & High Temperature Fans

Fire rated extractor fans and Smoke Extractor Fan Motors. Most normal fans only operate up to about 70 degrees Celsius, but these used when extra heat tolerance is required. Most have both a continuous and a maximum (for so many hours) rating.

Displaying 1 to 24 (of 100 products)
Belt Drive Cased Axial Fan - 500mm - L version
Belt Drive Cased Axial Fan - 500mm - L version
£ 1,568.42
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC. M...
Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT400/4-3AC
Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT400/4-3AC
£ 1,123.49
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning. High Temperature Motors are situ...
Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT450/4-3AC
Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT450/4-3AC
£ 1,455.19
A range of three phase roof mounted centrifugal fans which are designed to handle clean, grease laden or contaminated air, whilst providing easy access for cleaning. High Temperature Motors are situ...
CTHB/6-200
CTHB/6-200
£ 888.20
Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1) Also suitable for kitchens if used...
CTHT Kitchen/High Temp Roof Fan- 400mm
CTHT Kitchen/High Temp Roof Fan- 400mm
£ 1,383.75
THREE PHASE Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1) Also suitable for kit...
Helios GigaBox 400mm GBD 400/4/4 T120 centrifugal
Helios GigaBox 400mm GBD 400/4/4 T120 centrifugal
£ 1,282.60
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow. Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
KBR 315D2 IE2 Thermo fan
KBR 315D2 IE2 Thermo fan
£ 1,499.03
In accordance with Commission Regulation (EC) no 640/2009 of the European Parliament - eco-design requirements for electric motors - the new international efficiency classes are binding as of 16 June ...
Smoke Extract Axial Fan Series AXC 1000 (B)
Smoke Extract Axial Fan Series AXC 1000 (B)
£ 3,436.89
Smoke extract axial fan Series AXC(B), tested according to EN 12101-3 for 300°C-120min - AXC 1000-10/22°-4 (B) (15.0Kw) The Systemair AXC(B) range of long cased medium pressure axial fans is ava...
AXC 355-6/19°-2(B)-P (0.75 kW)  - Smoke Extract Fan
AXC 355-6/19°-2(B)-P (0.75 kW) - Smoke Extract Fan
£ 3,125.00
Smoke extract axial fan AXC(B): - Certified according to EN 12101-3 for 300°C/120 min. - CE mark of conformity. - Suitable for use inside or outside the fire zone. Temperature of medium for contin...
AXCBF 800D4-18 IE2  Bifurcated Axial Fans
AXCBF 800D4-18 IE2 Bifurcated Axial Fans
£ 4,124.53
• Aerofoil impeller with adjustable pitch angle • Die cast aluminium hub and blades • Bifurcated casing, hot dip galvanized steel, to EN ISO 1461 • flangesholes according Eurovent 1/2 • ...
Belt Drive Cased Axial Fan - 800mm - G version
Belt Drive Cased Axial Fan - 800mm - G version
£ 3,213.79
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC. M...
Belt Drive Cased Axial Fan - 900mm - H version
Belt Drive Cased Axial Fan - 900mm - H version
£ 5,019.36
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC. M...
CC-SHT 1004 (5.5kw)
CC-SHT 1004 (5.5kw)
£ 2,118.90
High efficiency duct axial fans designed for high temperature smoke extraction. CC SHT fans are specifically dimensioned in a standard range suitable for the performance ratings which are normally re...
CC-SHT 354 (4-pole)
CC-SHT 354 (4-pole)
£ 698.25
High efficiency duct axial fans designed for high temperature smoke extraction. This is 4 pole version rated at F300/120.(300 Degrees C for 2 hours) CC SHT fans are specifically dimensioned in a sta...
CHGT/4-630-6/-3KW- AXIAL FLOW CABINET FANS
CHGT/4-630-6/-3KW- AXIAL FLOW CABINET FANS
£ 2,241.18
Range of adjustable pitch aerofoil blade, axial flow cabinet fans designed for smoke extraction in fire conditions and certified F400-120 and F300-120 (CE marked)....
CHGT/4-800-9/-7.5KW- AXIAL FLOW CABINET FANS
CHGT/4-800-9/-7.5KW- AXIAL FLOW CABINET FANS
£ 2,636.91
Range of adjustable pitch aerofoil blade, axial flow cabinet fans designed for smoke extraction in fire conditions and certified F400-120 and F300-120 (CE marked)....
Helios GigaBox 250mm EC -  GBW 250 EC T120 centrifugal
Helios GigaBox 250mm EC - GBW 250 EC T120 centrifugal
£ 1,805.00
Designed for moving dirty, humid and hot air volumes up to max. 120°C.- Motor located outside of airflow. Temperature insulated partition panel between motor and impeller, lined with 20mm thick fl...
ILHT/4-400 CC  - High Temp Kitchen Duct Fan
ILHT/4-400 CC - High Temp Kitchen Duct Fan
£ 2,100.00
Application: Extraction of pollutants in professional kitchens. Installation in all positions and connection on all faces. Air stream temperature up to 120°C in continuous with motor at 40ºC max. ...
ILHT/4-450 CC  - High Temp Kitchen Duct Fan
ILHT/4-450 CC - High Temp Kitchen Duct Fan
£ 2,623.95
Application: Extraction of pollutants in professional kitchens. Installation in all positions and connection on all faces. Air stream temperature up to 120°C in continuous with motor at 40ºC max. ...
Woods 45JM/20/2/6/32/3ph  - Smoke Extract Fan F300/120
Woods 45JM/20/2/6/32/3ph - Smoke Extract Fan F300/120
£ 2,150.00
Woods 45JM/20/2/6/32/3ph - Smoke Extract Fan F300/120...
Belt Drive Cased Axial Fan - 710mm - H version
Belt Drive Cased Axial Fan - 710mm - H version
£ 2,359.89
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC. M...
Belt Drive Cased Axial Fan - 710mm - L version
Belt Drive Cased Axial Fan - 710mm - L version
£ 2,175.22
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC. M...
Belt Drive Cased Axial Fan - 800mm - L version
Belt Drive Cased Axial Fan - 800mm - L version
£ 2,686.73
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC. M...
Bifurcated Case Axial Fan 315mm (BIFA)
Bifurcated Case Axial Fan 315mm (BIFA)
£ 1,466.30
The Bifurcated Case Axial range of fans has been specifically developed to meet the need for an axial fan which can handle atmospheres normally detrimental to the life of the fan motor. By isolatin...
Displaying 1 to 24 (of 100 products)
1 x Stainless Steel Single Blade Regulating Damper -200mm1 x Access Door for Circular Duct - 300 x 200 - SIZE 501 x Ancillary Pack for SLC-5001 x MFA-AR/AXC 315 mounting foot1 x HCFB/4-400mm plastic impeller plate fan1 x CRBB/3-250/084M EC 2H01 x DDMP 10-10 FLANGE1 x Helios HQW-200/2 - IP551 x 204x60mm Equal T Piece1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 515watt VR RE1 x Elta Wall Cowl SWC45/501 x Insulated extract Plenum 6+11 x 100mm - 125mm Round Reducer1 x CADB/T-HE 54 ECOWATT Series1 x Metal Inline Fan - VENT-355N1 x Helios GigaBox 355mm GBD 355/4/4 centrifugal1 x Elta Unpodded Silencer 1D-250mm1 x SEL355/2-1AC1 x Etaline 355mm - E2-011 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x Etaline 355mm - D2 01 3 Phase1 x Etaline 355mm E4 011 x DEF-800AN1 x K 200 L Sileo1 x 150mm Round Wall Plate1 x Elta Standard Ambient Flexible Connector - 450mm1 x Elta SCP560/4-1AC - IP551 x Helios GigaBox 400mm GBD 400/4/4 centrifugal1 x SG AW 910 Guard grille (GFC)1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x JETLINE-200 - In Line Centrifugal Duct Fan1 x 150mm - 100mm Round Reducer1 x FSAF315B2DX Silencer 355/81 x ACO3TO-ADS-VFC-7.1A1 x HRT/4-630/25-BPN E221 x CBMT/Q 400-55 1 HEATER KIT1 x KV DUO 400 EC1 x IDEO 325 Ecowatt1 x Soler & Palau TCBB/6-500/H - IP651 x Impeller Side Guard - 400mm1 x Commercial Activated Carbon Filters - Panel Type - 18" x 18" x 1 - ACP1 x Etaline 710mm - D4 02 3 Phase1 x Metallic Kitchen Extractor - CK35N1 x EVL Filter G4 grade for PIV units1 x TUNE-R-160-3-M2 - Control Damper1 x Elta Cased Axial Flange - 400mm1 x HRB/6-630-30-APN1 x DV-ROF-V-315 Roof mounted unit1 x Synthetic Air Filter Media - 10mm x 2mtr x 5mtr Roll1 x Acopel F400-120/1601 x WSD 042 (730x730x70)1 x Elta SLC450-1EC -IE5 Motor- IP551 x Binks Bullows - Spray Booth Filter1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-3AC - Three Phase1 x TecFire Intumescent Damper - Rectangular 250x250mm1 x Soler & Palau - HCBB/4-630/H -IP651 x Jetflow-HIT Metal inline - 200mm1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-9000/500 ND - Pack 71 x Biflow SB315-CON4-1 - High Temperature Bifurcated Fan1 x HCFT/4-800mm plastic impeller plate fan1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x CPTA-E Flush mounted PIR sensor with timer1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x Delivery Surcharge1 x Acopel F400-630/1601 x Etaline 280mm1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Acopel F400-710/1801 x Differential Pressure Switch - 20 - 300 Pa - IP651 x 100mm Round Wall Plate1 x CMB-2-140-050 0.25Kw LG O1 x Rotorex HXBR 250mm Plate Axial Fan - Single Phase (2-pole)1 x Etaline 315mm - E2 03 (Low Power Version)1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x CBM 10/10 4 Pole 550watt RE VR (3 Phase)1 x BDS 200/250 RA b/d shutter1 x External weather louvre 500w x 500h - WL501 x 220x90mm 45 Degree Vertical Bend1 x Belt Drive Cased Axial Fan - 560mm - L version1 x KRJ - 250 Inlet Guard1 x Airvent ceiling fan controller1 x Soler & Palau - HXBR/4-315/H - IP541 x 316 grade Stainless Steel Jet Cowl Ventilation Outlet - 500mm1 x Elta SLC400/4-1AC - IP551 x Elta SCP250/4-1AC - IP551 x Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau1 x Acopel F400-500/1601 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x Etaline 400mm D2-01 3-phase1 x TXBR/4-450-C1 x Raptor SDA560/4-1AC1 x SPI-200 C Iris damper1 x 125mm - 150mm Round Reducer1 x Elta SCP400-1EC - IP551 x Acopel F400-315/1601 x FU 075 03 Frequency Converter (IP55 Version)1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x TD2000 Mixvent - 315mm1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x Soler & Palau TCBB/6-400/H - IP441 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x CBMT/Q 500-17 3 HEATER KIT1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Belt Drive Cased Axial Fan - 450mm - H version1 x Synthetic Air Filter Media - 6mm x 2mtr x 5mtr Roll1 x Elta SLC560/4A-1AC - IP551 x Soler & Palau TCBT/6-560/H - IP651 x Isolator Switch - EFF-ISO1 x Belt Drive Cased Axial Fan - 450mm - L version1 x Inline Hepa filter with housing & pre-filters1 x GENIOX 11 Roof Mounted External Unit1 x IP65 Remote Speed Adjustment Station1 x Soler & Palau - HXTR/2-250/H - IP441 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Control switch - CR1501 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CC-710-2.2kw1 x Soler & Palau TCBT/4-630/H - IP651 x Prio 150E2 circular duct fan1 x Soler & Palau - HXBR/4-630/H - IP541 x Soler & Palau - HXBR/6-630/H - IP541 x Soler & Palau - HXBR-200 ECOWATT - IP441 x 220x90mm Elbow Bend with 150mm Fixed Spigot1 x DA9/7 Feet1 x Painting Charge For Extlvr1 x Chaysol SA 18/8 RTC CW-single inlet centrifugal fan1 x Helios DDF-400 Roof Cowl1 x Soler & Palau - HCBB/6-450/H - IP651 x Ancillary Pack for SB-Biflow 400 model1 x Elta Short Cased ATEX Axial fan - SCX050L2-A9/161 x RSK450 - Back Draught Shutter1 x BDS 400/450 RA b/d shutter1 x ELTA - Single Phase Transformer 4amps1 x Rosenberg AKAD 630-4 A1 IP54 400V 50H1 x KV DUO 150 EC1 x Helios HQW-560/4 - IP551 x Soler & Palau TCBB/4-315/H - IP441 x SILENTUB 100/120 Mounting Feet1 x Elta SLC500/4A-3AC - IP551 x Belt Drive Cased Axial Fan - 710mm - L version1 x Rotorex HXTR Sickle Bladed Plate Axial Fan - 6 Pole - Three Phase - 710mm1 x AL 400 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Soler & Palau - TGT/4-450-6/0.55kW 32 Degree1 x DEF-1000-AN1 x 204x60mm x 1m Low Profile Plastic Ducting - 1 Meter1 x Flat Roof Terminal -OFT 5 - Ashphalt1 x CBT-80N Centrifugal1 x Metal Inline Fan - VENT-125NK1 x Mounting Feet (Pair) for SLC-800-060B-0800
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...