Sensors

ELTA Room Sensor CO2/Temperature/RH Room Sensor Comply with Part F guidance Monitor/ Measure carbon dioxide (CO2), temperature and relative humidity Suitable for +24V AC/DC and 230V 50/60Hz supp...

The GVI-002 is a gas interlock control system that can be used with either pressure switches or current sensors to monitor fans and enable the electrical supply to a gas valve actuator.. Control pa...

The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas v...

IR24-P The IR24-P is a presence detector that is designed for automatic ventilation control of HVAC systems. It provides higher levels of comfort in premises which require forced ventilation for shor...

Variable from 20 to 90 degrees relative humidity. Is usually fitted remotely to the fan. Humidity AND over-run timer....

MPC-1000 DUCT MOUNT AIRFLOW & PRESSURE DETECTOR...

MPC-800 DUCT MOUNT AIRFLOW & PRESSURE DETECTOR...

A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy. This version has changeover (SP...

A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy. Features • Fits standard 1 g...

Presence Detector IR24-PC A detector that gives a signal when someone is present in the room under supervision. The detector has a pulse detecting function that minimizes the risk for false alarm...

Pulser Temperature control Electronic temperature control The Pulser is a single or two-phase temperature regulator for controlling heater batteries. This device is connected in serie...

Automatically switches on when the relative humidity reaches an adjustable preset point and off again when it drops. Features Pull cord override switch. Fan Indicator light. Surface or recess moun...

Electronic Room humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers ~ Set of volt free changeover contacts ~ Rating 5Amp, 2A inductive...

Room Thermostat RT 0-30 The RT 0-30 is an electronic room thermostat for indoor wall mounting, with a change-over relay for regulating either heating or cooling. It has an integral sensor, but a...

The S-ET 10 (for wall mounting) switch off the supply voltage to the motor when the thermal contact in the motor windings is tripped. The motor protector is connected to a 230V supply and also to the ...

SCHT-AD Intelligent elements for demand controlled ventilation Ambient CO2 sensor, temperature and relative humidity with display...

SCO2-A Ambient CO2 and Temperature Sensor for use in S&P on demand ventilation systems....

SQA - Air quality sensor...

TDP-D: Pressure sensor, with display. Enables you to control the pressure in the fan inlet....

...

Duct temperature sensor. used in conjunction with electric heater and controller. NTC type with linear scale. Protection class IP20. Models: - TG-K330: from 0 to 30ºC. - TG-K360: from 0 to 60º...

Duct temperature sensor. used in conjunction with electric heater and controller. NTC type with linear scale. Protection class IP20. Models: - TG-K330: from 0 to 30ºC. - TG-K360: from 0 to 60º...

Duct temperature sensor. Used in conjunction with electric heater and controller. NTC type with linear scale. Resistance from 1.7K to 177K. Protection class IP20. -30 to +70 degrees C Compatible ...

Used in conjunction with electric heaters and controllers. NTC type with linear scale. Range of temperature 0-30ºC. Protection class IP30. 2 models: - Room sensor with set point adjustment, 0-3...

Thermostat for wall mounting in a room to switch fans on or off at required temperature. Mechanical type switching...