Sensors

...

IR24-P The IR24-P is a presence detector that is designed for automatic ventilation control of HVAC systems. It provides higher levels of comfort in premises which require forced ventilation for shor...

Ecor Pro Humidistat - EPHUM24DF...

TRICKLE AND BOOST IN IP56 ENCLOSURE SWITCHED BY THE 230 VOLT AC FROM PIR HIGH SPEED IS ACTIVATED BY THE PIR AND THE SPEED OF THE FAN IS SET BY THE INTERNAL PRESET MARKED HIGH. LOW SPEED IS THE ...

Presence detector for ceiling mount, sensitive to infrared radiation emitted by bodies in movement, with a 360º detecting angle. They incorporate an output to activate a fan (potential - free) Power ...

Item number: 6261 Differential pressure switch for air and non-corrosive gasses.Relay contact data 250 V AC, 5 A, change-over....

Room Thermostat RT 0-30 The RT 0-30 is an electronic room thermostat for indoor wall mounting, with a change-over relay for regulating either heating or cooling. It has an integral sensor, but a...

Presence Detector IR24-PC A detector that gives a signal when someone is present in the room under supervision. The detector has a pulse detecting function that minimizes the risk for false alarm...

CPTA-E Intelligent elements for demand controlled ventilation. Flush mounted PIR sensor with timer....

Electronic inline Duct humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers ~ Size 108mmx72mmx72mm - Probe length 225mm. ~ Set of volt ...

DT-1 Duct Mounted Thermostat. Duct thermostats are used to monitor the temperature of air or liquids. Applications include heating and air conditioning systems. The liquid filled sensing element ...

EC-Basic-T temperature Art no: 24805 • Simple to install, connect and set up • 50/60HZ mains option • Can be used with all 220V single phase and 380V three phase EC fans • Built in se...

TDP-D: Pressure sensor, with display. Enables you to control the pressure in the fan inlet....

Differential Pressure Switch - FPS2 - working range - 100 - 1000 Pa - IP65 Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches a...

Differential Pressure Switch - FPS2 - working range - 50 - 500 Pa - IP65 Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches are...

Differential Pressure Switch - FPS1 - working range - 200 - 1000 Pa - IP54 Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches a...

Differential Pressure Switch - FPS1 - working range - 50 - 500 Pa - IP54 Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches are...

Brand new product. Intelligent IAQ device available in three different versions: CO2 or VOC or RH%. Designed to create DCV systems when directly linked with AC or ECOWATT fans using either relay or ...

The CS2 current switch is used where fan current flow needs to be proved such as on a Gas Interlock system. When current flow is present the switch will operate. The fan current carrying cable is ...

The GVI-002 is a gas interlock control system that can be used with either pressure switches or current sensors to monitor fans and enable the electrical supply to a gas valve actuator.. Control pa...

A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy. This version has changeover (SP...

CO2 Sensor is used to monitor CO2 levels in a room and when a pre-set level is reached the sensor can then be used to either (dependent on model) switch on a fan or for kitchen applications used to sw...

Differential Pressure Switch - FPS1 - working range - 20 - 300 Pa - IP54 Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches are...

SQA - Air quality sensor...