AES-0,37KW,D, control unit
• Exhaust air and smoke extraction switchgear with direct switching
• All functions in accordance with VDMA 24177 / DIN/VDE 0660
• In plastic housing
• Motorpr...
CO2 Sensor is used to monitor CO2 levels in a room and when a pre-set level is reached the sensor can then be used to either (dependent on model) switch on a fan or for kitchen applications used to sw...
Electronic inline Duct humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers
~ Size 108mmx72mmx72mm - Probe length 225mm.
~ Set of volt ...
Electronic inline Duct humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers
~ Size 108mmx72mmx72mm - Probe length 225mm.
~ Set of volt ...
BEAS-control module
Control module that can adapt theall/nothing proportional input signal of a
detector or a probe to control a motorised
flap, or a two-speed single phase or
DC_fan, in minimum/...
Presence detector for ceiling mount, sensitive to infrared radiation emitted by bodies in movement, with a 360º detecting angle. They incorporate an output to activate a fan (potential - free) Power ...
Presence Detector IR24-PC
A detector that gives a signal when someone is present in the room under supervision. The detector has a pulse detecting function that minimizes the risk for false alarm...
Brand new product.
Intelligent IAQ device available in three different versions: CO2 or VOC or RH%.
Designed to create DCV systems when directly linked with AC or ECOWATT fans using either relay or ...
The GVI-002 is a gas interlock control system that can be used with either pressure switches or current sensors to monitor fans and enable the electrical supply to a gas valve actuator..
Control pa...
EC-Basic-T temperature
Art no: 24805
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Built in se...
The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas v...
IR24-P
The IR24-P is a presence detector that is designed for automatic ventilation control of HVAC systems. It provides higher levels of comfort in premises which require forced ventilation for shor...
Thermistor motor protection
The U-EK 230E is a thermistor motor protection device which is intended for use in conjunction with a contactor for the protection of the Atex fans in the DKEX, KTEX ...
Product description.
* Thermostat for controlling fans depending on the air temperature.
* It is possible to operate the fan with increasing or decreasing air temperature mode selected.
...
Pulser Temperature control
Electronic temperature control
The Pulser is a single or two-phase temperature regulator for controlling heater batteries.
This device is connected in serie...
Electronic Room humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers
~ Set of volt free changeover contacts
~ Rating 5Amp, 2A inductive...
A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy.
This version has changeover (SP...