Used in conjunction with electric heaters and controllers.
NTC type with linear scale.
Range of temperature 0-30ºC.
Protection class IP30.
2 models:
- Room sensor with set point adjustment,
0-3...
Duct temperature sensor.
Used in conjunction with electric heater and controller.
NTC type with linear scale. Resistance from 1.7K to 177K.
Protection class IP20.
-30 to +70 degrees C
Compatible ...
Duct temperature sensor.
used in conjunction with electric heater and controller.
NTC type with linear scale.
Protection class IP20.
Models:
- TG-K330: from 0 to 30ºC.
- TG-K360: from 0 to 60º...
The S-ET 10 (for wall mounting) switch off the supply voltage to the motor when the thermal contact in the motor windings is tripped. The motor protector is connected to a 230V supply and also to the ...
Room Thermostat RT 0-30
The RT 0-30 is an electronic room thermostat for indoor wall mounting, with a change-over relay for regulating either heating or cooling. It has an integral sensor, but a...
Electronic Room humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers
~ Set of volt free changeover contacts
~ Rating 5Amp, 2A inductive...
Automatically switches on when the relative humidity reaches an adjustable preset point and off again when it drops.
Features
Pull cord override switch.
Fan Indicator light.
Surface or recess moun...
Pulser Temperature control
Electronic temperature control
The Pulser is a single or two-phase temperature regulator for controlling heater batteries.
This device is connected in serie...
Presence Detector IR24-PC
A detector that gives a signal when someone is present in the room under supervision. The detector has a pulse detecting function that minimizes the risk for false alarm...
A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy.
Features
• Fits standard 1 g...
A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy.
This version has changeover (SP...
IR24-P
The IR24-P is a presence detector that is designed for automatic ventilation control of HVAC systems. It provides higher levels of comfort in premises which require forced ventilation for shor...
The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas v...
The GVI-002 is a gas interlock control system that can be used with either pressure switches or current sensors to monitor fans and enable the electrical supply to a gas valve actuator..
Control pa...
EC-Basic-T temperature
Art no: 24805
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Built in se...
TRICKLE AND BOOST IN IP56 ENCLOSURE
SWITCHED BY THE 230 VOLT AC FROM PIR
HIGH SPEED IS ACTIVATED BY THE PIR
AND THE SPEED OF THE FAN IS SET BY THE
INTERNAL PRESET MARKED HIGH.
LOW SPEED IS THE ...
Electronic inline Duct humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers
~ Size 108mmx72mmx72mm - Probe length 225mm.
~ Set of volt ...