Sensors

Presence Detector IR24-PC A detector that gives a signal when someone is present in the room under supervision. The detector has a pulse detecting function that minimizes the risk for false alarm...

TRICKLE AND BOOST IN IP56 ENCLOSURE SWITCHED BY THE 230 VOLT AC FROM PIR HIGH SPEED IS ACTIVATED BY THE PIR AND THE SPEED OF THE FAN IS SET BY THE INTERNAL PRESET MARKED HIGH. LOW SPEED IS THE ...

AES-0,37KW,D, control unit • Exhaust air and smoke extraction switchgear with direct switching • All functions in accordance with VDMA 24177 / DIN/VDE 0660 • In plastic housing • Motorpr...

Item number: 6261 Differential pressure switch for air and non-corrosive gasses.Relay contact data 250 V AC, 5 A, change-over....

Room Thermostat RT 0-30 The RT 0-30 is an electronic room thermostat for indoor wall mounting, with a change-over relay for regulating either heating or cooling. It has an integral sensor, but a...

Differential Pressure Switch - FPS2 - working range - 50 - 500 Pa - IP65 Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches are...

EC-Basic-T temperature Art no: 24805 • Simple to install, connect and set up • 50/60HZ mains option • Can be used with all 220V single phase and 380V three phase EC fans • Built in se...

Ecor Pro Humidistat - EPHUM24DF...

Duct temperature sensor. Used in conjunction with electric heater and controller. NTC type with linear scale. Resistance from 1.7K to 177K. Protection class IP20. -30 to +70 degrees C Compatible ...

IR24-P The IR24-P is a presence detector that is designed for automatic ventilation control of HVAC systems. It provides higher levels of comfort in premises which require forced ventilation for shor...

SQA - Air quality sensor...

TDP-D: Pressure sensor, with display. Enables you to control the pressure in the fan inlet....

Electronic inline Duct humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers ~ Size 108mmx72mmx72mm - Probe length 225mm. ~ Set of volt ...

Pulser Temperature control Electronic temperature control The Pulser is a single or two-phase temperature regulator for controlling heater batteries. This device is connected in serie...

SCO2-A Ambient CO2 and Temperature Sensor for use in S&P on demand ventilation systems....

Presence detector for ceiling mount, sensitive to infrared radiation emitted by bodies in movement, with a 360º detecting angle. They incorporate an output to activate a fan (potential - free) Power ...

Differential Pressure Switch - FPS2 - working range - 100 - 1000 Pa - IP65 Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches a...

SCHT-AD Intelligent elements for demand controlled ventilation Ambient CO2 sensor, temperature and relative humidity with display...

CPTA-E Intelligent elements for demand controlled ventilation. Flush mounted PIR sensor with timer....

BEAS-control module Control module that can adapt theall/nothing proportional input signal of a detector or a probe to control a motorised flap, or a two-speed single phase or DC_fan, in minimum/...

The S-ET 10 (for wall mounting) switch off the supply voltage to the motor when the thermal contact in the motor windings is tripped. The motor protector is connected to a 230V supply and also to the ...

Duct temperature sensor. used in conjunction with electric heater and controller. NTC type with linear scale. Protection class IP20. Models: - TG-K330: from 0 to 30ºC. - TG-K360: from 0 to 60º...

...

Provides fully automatic control. Detects contaminants such as cigarette smoke, body odours, toilet odours and cooking smells. Activates ventilation system when preset threshold is reached. Can ...