Switch Devices and Status Indicators

3 step switch MTS •Used to control 3 speed fans. •Surface and flush mounting •Max. ambient temp 50 °C • Protection class IP 44 ...

Two speed switch for use with the S&P TD range and any other two speed fans. ~ Fan ON/OFF and speed selector I/II switch. ~ Max current rating 4,5 A....

The RS1 is a 15 amp fan reversing switch housed in a compact and durable IP65 enclosure. The selector switch has forward, reverse and off positions and is suitable for single or three phase supply. �...

DOL MOTOR STARTER THREE PHASE Standard direct on line starters with conventional thermal overloads. The DOL starters are suitable for single or three phase fans with full load currents of up to 26 am...

MEV Spider - Additional Wireless Switch to suit the MEV Spider Whole House Extract Ventilation unit to remotely switch it into boost operation....

OZEO-ECO-W- Additional Wireless Switch to suit the OZEO E ECOWATT Whole House Extract Ventilation unit to remotely switch it into boost operation....

CR-300 Control unit for HV-230 A, HV-300 A and HVE-230 A Fitted with: - A selector for the different modes of fan operation (0ff and Two Speed Settings) - A reversing switch to change the airfl...

DOL MOTOR STARTER SINGLE PHASE Standard direct on line starters with conventional thermal overloads. The DOL starters are suitable for single or three phase fans with full load currents of up to 26 a...

Isolator switch for use with most fans listed. Fits into a pattress for on/off control. Single gang, 3 pole isolator...

Control switch - CR150 for HV-150 A and HVE-150 A Fitted with: - One single CR-150 unit can operate up to 5 fans...

Isolator switch for use with most fans listed. Fits into a pattress for on/off control....

Technical Specifications • 230V AC 50 Hz • Fused:Supplied with BS1362 13A Fuse • Switch Rating: 13A Resistive (3kW) 750W Incandescent, Halogen lighting 500W Fluorescent lighting 200W LED ...

S&P MULTI-REG EC FAN CONTROLLER / INTERFACE Fan controller to provide demand ventilation speed control for dedicated control of the S&P ECOWATT EC ranges and full BMS compatibility....

The ACOFR changeover panels are designed to suit single phase twin fan units where airflow switches are not fitted. The control panel fascia has a power lamp, fan fail lamp and a rocker switch. The V...

MV-B Dual Switch for use with Helios HQW plate fans,...

The ACOTO range of changeover panels are designed to suit either single or three phase (Direct On Line starting) twin fan units fitted with or without airflow switches. The changeover panels incorpora...

DOL MOTOR STARTER with ISOLATOR- THREE PHASE Standard direct on line starters with conventional thermal overloads. The DOL starters are suitable for single or three phase fans with full load current...

Heat Recovery Inside Wall HRU-WALL - Controller Switch Please note this switch is only compliant for the HRUW100 and HRUW150 fan units....

Isolator Relay Controller - 442030 Allows fan unit to be isolated from other mains circuit when used with TIM2, Trickle/Boost switch or light switch control....

Multi-function remote control panel with LCD display Supplied as standard with Prema products Control functions • Applications for pressure, CO2 , 0-10V, manual • Fan run status (fan fail) ...

Switch 1: High/Low speed Switch 2: On/Off (or off/tricklvent depending on the fan option selected. Surface or recess mounting Used with premier DX200 but suitable for many 2 speed fans. w85 x h85...

Remote Indicator RED/GREEN - AM12 A range of visual and/or audible indicators for applications such as filter monitoring, airflow monitoring etc. Indicators that when used in conjunction with a filt...

ACO3TO-ADS-VFC-7.1A...

IP65 Remote Speed Adjustment Station with on/off switch. For use with the INV3 range of inverters....