Plastic inline extractor fans are normally used with ducting either side and with internal and external grilles. Because in-line fans are normally situated in the roof space this can make them a very quiet and powerful bathroom fan or kitchen canopy fan. Backdraft dampers are recommended for windy areas.
See also our Metal inline fans for metal versions and also our acoustic inline fans section for acoustic box fans. For a wider selection of larger units look at the commercial range
In-line mixed-flow fans, low profile, for circular ducts and manufactured with 85% recycled plastics. The impeller and silent-block are kept in reinforced virgin plastics to ensure performance.
The r...
In-line mixed-flow fans, low profile, for circular ducts and manufactured with 85% recycled plastics. The impeller and silent-block are kept in reinforced virgin plastics to ensure performance.
The r...
In-line mixed-flow fans, low profile, for circular ducts and manufactured with 85% recycled plastics. The impeller and silent-block are kept in reinforced virgin plastics to ensure performance.
The r...
In-line mixed-flow fans, low profile, for circular ducts and manufactured with 85% recycled plastics. The impeller and silent-block are kept in reinforced virgin plastics to ensure performance.
The r...
In-line mixed-flow fans, low profile, for circular ducts and manufactured with 85% recycled plastics. The impeller and silent-block are kept in reinforced virgin plastics to ensure performance.
The r...
AXC TP- Plastic inline unit,
Silent and Powerful backward curved centrifugal motor with thermal cut out.
Please select size below
PLEASE NOTE THIS ALSO "NOW" COMES WITH THE MOUNTING BRACKET....
Ruck Inline Mixvent Fan - 150mm spigots
600m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket-
See manufactur...
Ruck Inline Mixvent Fan - 200mm spigots
1200m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket
See manufactur...
Ruck Inline Mixvent Fan - 250mm spigots
1600m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket
See manufact...
Ruck Inline Mixvent Fan - 315mm spigots
3176m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket
See manufact...
This is the Envirovent version of the S&P TD-160-T.
They produce less pressure then centrifugal fans and are therefore only good for runs of up to 7 meters, but as they come with a run-on timer opti...
This is the Envirovent version of the S&P TD-160-T.
They produce less pressure then centrifugal fans and are therefore only good for runs of up to 7 meters, but as they come with a run-on timer opti...
• Speed-controllable
• Integral thermal contacts
• Can be installed in any position
• Compact design
• Low SFP values and high efficiency
• Low sound level
The prioAir series is de...
The RVK series is designed for installation in ducts. The casing is manufactured from PA6 fibreglass reinforced plastic which gives the fan a less leckage casing. Duct connected wet room applications ...
S&P TD-1000/200 SILENT ECOWATT Model,
Max Airflow - 1000 m3/h
Motor Power - 99 Watts
Absorbed Current - 0.66 Amps
Weight - 8.7 Kgs
Temperature Range: -20*C up to + 40*C
IP Rating - IP44
Low pro...