Plastic inline extractor fans are normally used with ducting either side and with internal and external grilles. Because in-line fans are normally situated in the roof space this can make them a very quiet and powerful bathroom fan or kitchen canopy fan. Backdraft dampers are recommended for windy areas.
See also our Metal inline fans for metal versions and also our acoustic inline fans section for acoustic box fans. For a wider selection of larger units look at the commercial range
They produce less pressure then centrifugal fans and are therefore only good for runs of up to 7 meters, but as they come with a run-on timer option they are perfect for bathroom/shower rooms.
These ...
In-line axial fan Silentub 100 offering a very low noise level and specifically designed to work through a duct or to be flush mounted into the wall, ideal
for ventilating small areas or to exchange ...
The TDM series of plastic low pressure in-line duct axial fans are specifically designed for small residential ducted ventilation systems.
The TDM series can be used with short ducting lenghts (max 3...
Soler & Palau TD250 Mixvent Series Inline Duct Fan - 100mm Inlet/ Outlet - Airflow 180/ 240m3/hr
The S&P MIXVENT-TD series of in-line duct fans offer one of the most comprehensive and flexible in-l...
Soler & Palau TD350 Mixvent Series Inline Duct Fan - 125mm Inlet/ Outlet - Airfolw 280/ 360m3/hr
The S&P MIXVENT-TD series of in-line duct fans offer one of the most comprehensive and flexible in-l...
Soler & Palau TD500 Mixvent Series Inline Duct Fan - 150mm Inlet/ Outlet - Airflow 430/ 580m3/hr - 3 speed motor on both standard and timer versions.
The S&P MIXVENT-TD series of in-line duct fans ...
Ruck Inline Mixvent Fan - 200mm spigots
1200m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket
See manufactur...
Ruck Inline Mixvent Fan - 150mm spigots
600m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket-
See manufactur...
They produce less pressure then centrifugal fans and are therefore only good for runs of up to 7 meters, but as they come with a run-on timer option they are perfect for bathroom/shower rooms.
These ...
Ruck Inline Mixvent Fan - 250mm spigots
1600m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket
See manufact...
This is the Envirovent version of the S&P TD-160-T.
They produce less pressure then centrifugal fans and are therefore only good for runs of up to 7 meters, but as they come with a run-on timer opti...
A complete range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for ...
A complete range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for ...
A complete range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for ...
In-line axial fan Silentub 200 offering a very low noise level and specifically designed to work through a duct or to be flush mounted into the wall, ideal for ventilating small areas or to exchange h...
The RVK series is designed for installation in ducts. The casing is manufactured from PA6 fibreglass reinforced plastic which gives the fan a less leckage casing. Duct connected wet room applications ...
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 200mm
Airflow: 910m3/hr
Power Absorbed: 102W
Sound Level: 19db radiated @ 3M
The S&P TD SILENT Series Inl...
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 200mm
Airflow: 1040m3/hr
Power Absorbed: 130W
Sound Level: 21 db radiated @ 3M
The S&P TD SILENT Series I...
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 250mm
Airflow: 1320m3/hr
Power Absorbed: 204W
Sound Level: 35db radiated @ 3M
The S&P TD SILENT Series In...
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 315mm
Airflow: 1770m3/hr
Power Absorbed: 293W
Sound Level:39db radiated @ 3M
The S&P TD SILENT Series Inl...
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 125mm
Airflow: 360m3/hr
Power Absorbed: 27W
Sound level: 23db radiated @ 3M.
The S&P TD SILENT Series In...
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 150mm
Airflow: 550m3/hr
Power Absorbed: 59W
Sound level:22db radiated @ 3M
The S&P TD SILENT Series Inlin...
AXC TP- Plastic inline unit,
Silent and Powerful backward curved centrifugal motor with thermal cut out.
Please select size below
PLEASE NOTE THIS ALSO "NOW" COMES WITH THE MOUNTING BRACKET....