• Model:DVG-V560D4

DVG-V 560D4-8/F400

£ 1,836.60 (excl. VAT)

£ 2,203.92 (inc. VAT)

DVG-V 560D4-8/F400
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Spiral Duct Grille Termination - 200mm1 x Male Ducting Connector - 200mm1 x Flanged Spigot - 200mm2 x Spiral Ducting 3 Meters - 200mm1 x DEF-800AN1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x Ducting 45 Degree Bend - 200mm1 x Helios GigaBox 560mm GBD 560/4/4 T120 centrifugal1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP551 x Ducting Y Piece - 200mm1 x RDS 7 Helios Transformer Controller With Motor Protection1 x Ducting 15 Degree Bend - 200mm1 x Spiral Ducting 1 meter - 200mm1 x Purlin Box 200/250 for RAW Cowls1 x Ancillary Sealing Band - 200mm2 x Ducting 90 Degree Bend - 200mm1 x Helios GigaBox 500mm GBW 500/4 centrifugal1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-1000-A 5.5kw1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Elta SLC560/4B-3AC - IP551 x Ducting 90 Degree Bend - 100mm1 x Electronic extractor fan speed controller - FSC 1.51 x 220x90mm to 204x60mm Rectangular Adapter1 x Soler & Palau TCBT/4-560/H - IP651 x Purlin Box 630/710 for RAW Cowls1 x Metal Inline Fan - VENT-200NK1 x Soaker Sheet to suit RA200/2501 x Soler & Palau TCBB/4-560/H - IP651 x ZAC- 560 -4-11 x 220x90mm Equal T Piece1 x AIRVENT speed control - AIR4019611 x Elta SLC560/4A-3AC - IP551 x 204x60mm Rectangular to 100mm Round Adaptor1 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Single Phase1 x Etaline 500mm - D4 01 3 Phase1 x Roof Axial Fan and Cowl - Three Phase -350mm1 x Slotted channel1 x Ancillary Pack for SLC-4501 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Three Phase1 x Spiral Duct Grille Termination - 560mm1 x KABT/4- 9000/5001 x Soler & Palau VFD-M inverter 10 amp IP541 x GB-WSG 630 External Weather Louvers for the Giga-Box Fans - 630mm
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Unbelievable! With TDmixvent500: noise reduction minimum 50%...