• Model:DVG-V560D4

DVG-V 560D4-8/F400

£ 1,928.43 (excl. VAT)

£ 2,314.12 (inc. VAT)

DVG-V 560D4-8/F400
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x DVG-V 560D4/F400 IE21 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Soler & Palau - HXTR/12-800/28-A1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT560/4-3AC1 x LBFR 355 G4 - Helios Inline Filter Box - 355mm1 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x HRST/6-800/28-AQ C21 x MFL-200 G4 Filter Box1 x HV Wall Mounted Belt Drive Fan 800mm 400V / 50Hz 0.75kW - Three Phase1 x Spare filter for Energi Sava 200 & 250 HR unit1 x Soler & Palau TCBB/4-450/H - IP651 x Spare filter Set for Energi Sava 300 & 400 HR unit1 x DHS 225EZ roof fan1 x Soler & Palau - HCBT/4-800/L-AX - IP551 x Metal Washable Filter G2 Grade - 290 x 290 x 471 x Soaker Sheet to suit RA10001 x Speed Controller - REB61 x Roof Axial Fan and Cowl - Three Phase -630mm1 x HEPA TERMINAL HOUSING with HEPA Filter A/H14/D/MINI/2GR1 x Synthetic Air Filter Media - 10mm x 2mtr x 20mtr Roll2 x DVG-V 560D4-8/F4001 x HCFT/4-800mm plastic impeller plate fan1 x HCFT/6-800-H plastic impeller plate fan1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x Metal Washable Filter G2 Grade - 190 x 190 x 471 x HRT/6-800/28-BZN-68C1 x Elta SCP800/6/8-3AC - IP551 x Elta HXP 800mm 6-Pole (Three Phase)1 x Spiral Ducting 1 meter - 160mm1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x DVNI-355 E4 - Insulated Kitchen Roof Fan1 x Male Ducting Connector - 315mm1 x Air Trak Heater-100mm1 x Elta Skyflow SSRL315-1EC
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...