• Model:DVG-V560D4

DVG-V 560D4-8/F400

£ 1,928.43 (excl. VAT)

£ 2,314.12 (inc. VAT)

DVG-V 560D4-8/F400
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x KVK SLIM 100 EC - Centrifugal Circular Duct Fan1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Raptor SDA450/6-1AC1 x Elta SCP630/4-3AC - IP551 x Elta SCP560/4-1AC - IP551 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x HCFT/4-560mm plastic impeller plate fan1 x KV DUO 250 EC1 x HXP560/6-3 - 6 Pole - Three Phase1 x Direct AM Delivery Surcharge1 x Backdraught Shutters 039-SFSV-63/711 x DVV 800D4-XL/F400 smoke extr1 x Spiral Ducting 3 Meters - 450mm1 x Ducting 45 Degree Bend - 200mm1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Commercial Thermostat - TH161 x Raptor SDA500/4-1AC1 x ELTA - Single Phase Transformer 8amps1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Soaker Sheet to suit RA630/7101 x 220x90mm Rectangular to 150mm Round Adaptor1 x Soler & Palau TCBT/6-500/H - IP651 x SPI-315 C Iris damper1 x TUNE-R-80-3-M0 - Control Damper (NO ACTUATOR)1 x Helios HQW-400/6 - IP551 x AL 400 D2 01 AXIALINE - High Performance Long Cased Axial Fan1 x 220x90mm 45 Degree Horizontal Bend1 x Ducting 15 Degree Bend - 150mm1 x MTS10- extractor fan 3 step switch1 x ELTA - Three Phase Transformer 10amps1 x DHS 500DV roof fan1 x OBD 450x450 - for use with 4WAY-5951 x Two Speed Switch - REGUL-21 x Spiral end cap - 450mm1 x ELTA - Three Phase Transformer 3amps1 x HCFB/4-315mm (B-FLOW Supply Air) plastic impeller plate fan1 x HD Series Control Damper - 2000mm X 1000mm1 x Helios GigaBox 630mm GBD 630/6/6 centrifugal1 x HCFT/4-315mm (B-FLOW) plastic impeller plate fan1 x Elta SkyFlow SSRL 500 EC1 x Multileaf Volume Control Dampers -600/600 Rectangular Flanged
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...