• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Curved boot - 900mm1 x Ducting 90 Degree Bend - 355mm1 x Female Ducting Connector - 900mm1 x G2 duct Mounted Panel Filter - 435 x 435 x 47mm1 x Spiral Ducting 1 meter - 80mm1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x HRB/4-450-35-BPN1 x Elta Wall Cowl SWC25/311 x AMD 225/4 - Medium pressure axial fan 3-PH 400 V1 x Elta SCP450/4-3AC - IP551 x Soler & Palau - HCBT/6-450/H - IP651 x HRB/4-450-30-APN1 x AMD 225/2 - Medium pressure axial fan 3-PH 400 V1 x F7 Replacement Bag Filter for FT Filter Box Type 100-250mm ONLY1 x Systemair AR 200E2 Sileo - IP441 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x Elta SPA450/4-1AC - IP541 x Anti Vibration Duct Suspension Rings - 315mm1 x Soler & Palau VFD-T inverter 5 amp IP541 x HRT/4-450/35-BPN1 x MTP 10, 10K, Speed control1 x G2 duct Mounted Panel Filter - 535 x 535 x 47mm1 x Systemair AW-Sileo 450-E61 x Soler & Palau - HCBB/6-450/H - IP651 x Elta HWFA-650 Oscillating Wall Fan1 x Elta Skyflow SSRL315-1EC1 x Classic SAX30/12A Window/Wall Mounted1 x Hydor HCF-6.0 Electronic Speed Controller for HPA plate fans,1 x Spiral Ducting 1 meter - 160mm1 x CRHT/4-500 N Roof mounted Fan - Horizontal discharge1 x Elta Skyflow SSRL450-1EC1 x Gorilla HVLSX601 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/4-3 Three Phase1 x DHS 500DV roof fan1 x Gorilla HVLSX40S1 x Elta SCP500/4-1AC - IP551 x DVN 900D6 - High Temperature Roof Fan1 x DVG-V 560D4-8/F4001 x Gorilla HVLSX401 x DVS 450EV Centrifugal roof fan, vertical discharge
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...