• Model:ECOAIR-LC

EcoAIR LC ECOWATT - DMEV

£ 112.11 (excl. VAT)

£ 134.53 (inc. VAT)

ECOAIR LC ECOWATT

Range of 100mm domestic centrifugal extract fans for wall or ceiling installations, designed to work in accordance with two different operating modes:

-Continuously running operation which can be boosted with external or internal switch depending on the models.
- Intermittent operation with adjustable speed at installation.
Fitted with DC motors mounted on silent elastic blocks, the fans deliver incredibly silent running and exceptional performance with stylish features and very low power consumption significantly reducing energy costs.

5 models available
EcoAIR SLC: Continuous operation: the unit runs on trickle setting and can be boosted by an external switch. Intermittent operation: the unit runs on preset speed when external switch is turned on.
EcoAIR TLC: Continuous operation: Same operation than the SLC model, with an adjustable run-on timer, set to between 1 to 30 minutes, on the boost. Intermittent operation: The timer allows the fan to continue to operate for the selected period after the switch has been turned off.
EcoAIR HLC: Continuous operation: The boost operation is activated either by the adjustable integral humidity sensor or by an external switch both with timer. Intermittent operation: the humidistat causes the extractor to operate automatically when the humidity level in the room is higher than the set level, with the facility to override the hygrostat by means of an external switch. Interval functions also integrated.
EcoAIR MLC: Same operation than H model but using the internal pullcord instead of the external switch.
EcoAIR DLC: Continuous operation: The boost operation is activated by the PIR detector and continues to operate after the selected period set on the timer. Intermittent operation: The extractor starts automatically when a movement is detected by the PIR detector and continues to operate after the selected period set on the timer.

EcoAIR LC ECOWATT 230V 50/60Hz IPX4 -Lp
PDF Files


EcoAir LC Data Sheet,

Available Options

1 x CBMT/Q 250-54 1 HEATER KIT2 x CBA-80 Inlet Flange for CBT-801 x Acopel F400-315/1601 x Flexible PVC Ducting - 204x601 x DA9/9 Feet2 x Atex Motor Protection Switch - U-EK230E EX1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x Mounting Feet (pair) for SB-CON 2501 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x F7/G4 filter kit for IDEO HR unit1 x Etaline 400mm D4-01 3-phase1 x DA7/7 Feet1 x Helios HQW-710/6 - IP551 x ISA-ILHT-500/560/630 - Anti-vibration mounts1 x 2mtr Round Ducting - 100mm1 x Venturia Whole House Ventilation1 x MTG FEET & ANTI VIB. MOUNTS (SET OF 4) for MFQ560/4/31 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-12000/560 ND - Pack 81 x CBM 9/9 4 Pole 550watt C VR-( Three Phase) CLEARANCE ITEM1 x CMB-2-140-050 0.25Kw LG O1 x Elta Powder Coated Cased Axial Flange - 630mm1 x AL 400 D2 01 AXIALINE - High Performance Long Cased Axial Fan1 x Roof Axial Cowl - RAW10001 x CBMT/Q 250-30 1 HEATER KIT1 x Elta SPA710/4/6-3AC - IP541 x Acopel F400-200/1601 x Access Door for Circular Duct - 400 x 300 - SIZE 631 x MPS Weather Housing1 x Soler & Palau - Contra Rotating TCBTx2-560 - IP651 x 100mm Round 45 Degree Bend1 x Round ceiling diffuser 200mm1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 630mm1 x Woods 1400mm Flex Connector - 4148511 x HRB/6-560-35-APN-C1 x Elta SLC500-1EC -IE5 Motor- IP551 x AKOR Mounting Plate for GD model(VIM166423)1 x ELTA - Three Phase Transformer 3amps1 x BDS 400/450 RA b/d shutter1 x K 315 L Sileo Metal Tube Fan1 x Helios HQW-630/6 - IP551 x CBM 10/10 4 Pole 550watt RE VR (3 Phase)1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Helios HQW-450/6 - IP551 x EC-Vent control board1 x Blast Gate (Manual) 250mm1 x Helios HQW-250/2 - IP551 x Metal Inline Fan - VENT-125NK1 x Jetflow-HIT Metal inline - 200mm1 x Duct Humidistat - HS4_hdt1 x Soler & Palau HXM-250mm1 x FSAF450B1DA Silencer 500/8
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...