Electronic Reversible FSC 1.5Amp controller
Our Price: £28.49
£34.19 inc. VAT
Model no. ~ FSC1.5REV
Electrical supply ~ 230v 1Ph 50Hz
Current Rating ~ 1.5A
Dimensions( H x W x D) ~ 87mm x 87mm x 44mm
Mounting ~ Surface/Flush
THESE CONTROLLERS ARE ONLY SUITABLE WITH FANS THAT HAVE A SEPARATE REVERSE FLOW WINDING. (Such as most ceiling sweep fans.)
Check that the speed controller supplied is compatible with the fan. Install in a dry sheltered position. Do not install in close proximity to a heat source. Remove the front cover of the controller by unscrewing the fascia fixing screws. This provides access to mounting holes and electrical terminals. All wiring must be carried out by a suitably qualified and competent person and comply with current applicable regulations.
Select the directtion of fan rotatation required using the FWD/OFF/REV switch. Rotating the control knob clockwise will increase the speed of the fan from the pre-set minimum to full speed.
Minimum speed adjustment:
On certain fans the factory set minimum pre-set may need adjusting. This can be achieved by rotating the minimum trimmer inside the speed controller clockwise to increase the minimum level
Maximum speed adjustment:
This can be achieved by rotating the maximum trimmer inside the speed controller anti-clockwise to decrease the maximum level.
Installation of the controller and adjustment of the internal minimum and maximum trimmers should be carried out with the electrical supply isolated