• Model:SFB042-VDE.4

Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm

£ 776.93 (excl. VAT)

£ 932.32 (inc. VAT)

Raptor SFB ATEX Plate Mounted Axial Flow Fan SFB042-VDE.4Y.A4P Three Phase

Applications
This fan is ideally suited for Chemical Process, Water and Sewage Treatment, Material and Gas Waste, Dust and Paint Extraction.

Max Duty - 4,460.4 m3/hr
Speed RPM - 1402
Three Phase - 380V to 415V / 50Hz
Max Power Absorbed - 0.310 KW
Suitable for operating temperatures from -20°C to +40°C
DBA @ 3m - 55 dB Inlet
Overall Efficiency - 29.9%

Casing
To ensure a long lasting and robust construction this fan has an all metal fan casting and gaurd. The units are made from mild steel and are suitably treated to provide full corrosion protection, the guard is finished in a black (RAL 9005) powder coated polyester epoxy paint. The Fan plates have a paint finish in black (RAL 9905) and have a surface coating to fufill the requirements in DIN EN 13463-1 regarding electrostatic charges.

Motors
The motors are Ziehl-Abegg, light weight external rotor motors that are highly efficent and come with sealed for life, maintenance free ball bearings, this allows the fan to be installed at any angle. All the motors are suitable for speed control and each motor has temperature monitoring by integrated PTC Thermistor. Motors according to: Gas, Zone and ignition temperature. Protection to EX II 2G c EX e IIB T4 classified for construction saftey and fufill the requirements stated in 94/4/EU (ATEX) directive. Fans are suitable for operating temperatures from -20°C to +40°C. Electrical connection to the motor is by a 650mm long flying lead.

Impellers
The pressed aluminium impellers provide low noise and increased efficency. The impellers have protective measures between the rotating and stationary components, dynamically balanced to ISO 14694 Grade G6.3, and finished in black (RAL 9005).

Quality Management
Units are designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SFB units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).

PDF Files


Raptor Atex

1 x Spiral Duct Grille Termination - 450mm1 x High Temperature Flexible Connector - 063-800-PU2501 x Acoustic Box Fans (Inline) - CAB-1001 x Acoustic MiniBox Fan - MINI-BOX 1001 x Jetflow-HIT Metal inline - 125mm1 x Ducting 30 Degree Bend - 450mm1 x Spiral Ducting 1 meter - 450mm1 x *VORT HRW 30 MONO Evo HCS - Single Room Heat Recovery Unit,1 x Helios ZNE Electronic Fan Overrun Timer1 x Spiral Ducting 3 Meters - 450mm1 x HD Series Control Damper - 3000mm X 1500mm1 x Flanged Spigot - 450mm1 x Spiral end cap - 450mm1 x Etaline 200 - EC1 x Anti Vibration Duct Suspension Rings - 160mm1 x Anti Vibration Duct Suspension Rings - 150mm1 x Elta Variable Speed Drive IP66 - 1.5KW1 x CBMT/Q 150-15 1 HEATER KIT1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x Ducting Reducer Long - 1000mm to 900mm1 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan1 x AW 420 D4-2-EX Explosion Proof Axial Fan - ATEX1 x Gorilla HVLSX701 x CBT-80N Centrifugal ATEX II 2G Exe II T31 x Helios GigaBox 450mm GBD 450/4/4 centrifugal1 x FlameProof Plate Axial Fan - Three Phase - 15 inches - Eexd IIC T4 -4pole1 x SPI-125 C Iris damper1 x Ducting Reducer Long - 1000mm to 630mm1 x Belt Drive Cased Axial Fan - 560mm - H version1 x Duct Termination with Mesh - 150mm1 x FSD-TD 400 x 250 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Etaline 250mm - D2 01 3 Phase1 x Elta SLC560/4A-3AC - IP551 x FRQ-10A V2 Inverter Speed controller1 x Ducting Y Piece - 150mm1 x Elta SLC1000/6B-3AC - IP55
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...