• Model:ERM18BRACKET

ERM180EXE Bracket

£ 36.38 (excl. VAT)

£ 43.66 (inc. VAT)

An ATEX rated inline fan for explosive atmospheres, such as paint spray booths, thinners extraction and any other use involving explosive substances.
Used in conjunction with ducting, (200mm).
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 580m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

Click HERE for datasheet.
3 x Elta Variable Speed Drive IP66 - 2.2KW2 x FRQ5-4A V2 Inverter Speed Controller1 x FRQ-10A V2 Inverter Speed controller1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x FU 15 40 Frequency Inverter1 x Frequency converter FU 075 14 - IP662 x Elta Variable Speed Drive IP66 - 0.75KW1 x FU 22 25 Frequency Inverter1 x FU 075 52 Frequency Inverter (IP20)2 x FRQ5-10A Inverter Speed controller1 x FU 15 16 Frequency Inverter2 x Elta Variable Speed Drive IP66 - 5.5KW3 x Elta Variable Speed Drive IP66 - 1.5KW1 x Frequency converter RUCK - FU 075 202 x Elta Variable Speed Drive IP66 - 4.0KW2 x Elta 10 Amp Electronic single phase speed controller.1 x ELTA - Three Phase Transformer 10amps1 x ELTA - Three Phase Transformer 3amps1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)2 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x FU 075 04 Frequency Inverter (IP20)1 x Frequency converter RUCK - FU 075 211 x FU 22 04 Frequency Inverter1 x NKS-D swirl diffuser v-300 x 300mm1 x ELTA - Single Phase Transformer 2amps1 x PCA Diffuser - PCA-3151 x Balance S Diffuser - NO RING - 125mm1 x Circular Ceiling Diffuser - TST 1004 x Electronic extractor fan speed controller - FSC 1.54 x EC6H - Reversible Group Fan Electronic Controller1 x Circular Ceiling Diffuser - TST 2001 x Round ceiling diffuser 400mm1 x Curved Blade Grille 600x600 (2way blow)1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Elta 2 Amp Electronic single phase speed controller.4 x Elta 3 Amp Electronic single phase speed controller with TK1 x Circular Ceiling Diffuser - TST 1602 x Elta 3 Amp Electronic single phase speed controller.5 x Elta 6 Amp Electronic single phase speed controller with TK1 x EFSC-3N- Single Phase Speed Control1 x Balance S Diffuser - NO RING - 100mm2 x Round ceiling diffuser 200mm1 x ELTA - Single Phase Transformer 12amps3 x COM-31 x ELTA - Single Phase Transformer 4amps2 x AIRVENT speed control - AIR4019611 x Round ceiling diffuser 250mm1 x EFSC-6N- Single Phase Speed Control4 x Elta 6 Amp Electronic single phase speed controller.1 x Round ceiling diffuser 350mm1 x PCA Diffuser - PCA-2501 x ELTA - Single Phase Transformer 10amps3 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A3 x Push Timer Switch - ZA43 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B7 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp3 x Remote controller FLEX - for VEKO INT3 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans3 x Helios TSW 7.5 Amp Transformer speed controller5 x Vent Axia ACM 150 inline mixed flow duct fan2 x Helios TSW 0.3Amp Compact Transformer speed controller4 x Helios TSW 3 Amp Transformer speed controller3 x Transformer 5 Speed Controller - ATC1-12TK2 x Three Phase Transformer controllers - RMT 1.5 Amp3 x RDS 11 Helios Transformer Controller With Motor Protection3 x Helios TSW MCB Amp Transformer speed controller4 x Helios TSW 1.5 Amp Transformer speed controller6 x Vent Axia ACM 125 inline mixed flow duct fan4 x MV-B Dual Switch for use with Helios HQW plate fans,1 x Isolator Switch - ISOSW4 x DEF-140T Inlet Guard for the CBT-100N3 x MWS 3 – Transformer Controller With Motor Protection2 x TG-K Duct temperature sensor4 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x BEAS-control module2 x Helios HQW-200/2 - IP552 x Envirovent G4 Filter - SL-G4/F71 x ERR 20/1 Centrifugal inline fan4 x MWS 1.5 – Transformer Controller With Motor Protection1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box4 x WS - Reversing Switch from Helios Fans3 x Vent Axia T-Series Controller5 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan4 x Vent Axia ACM 100 inline mixed flow duct fan3 x Single phase speed controller by auto-transformer - RMB 1.5 Amp6 x Transformer (silent) speed controller - RE 3.0 Amp2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted2 x CBS-60 Outlet Flange for CSB/CBT-601 x Elta ACO Panel 149-ACO14E4 x Helios HQW-200/4 - IP551 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)1 x EC-Vent control board6 x Speed Controller - REB51 x CONTROL ECOWATT - Basic5 x Transformer (silent) speed controller - RE 1.5 Amp1 x ACO 149-ACO1/EDV2 x Skyflow SSR Horizontal Roof Cowl SSR31/35B5 x Multiflow SMB550/4-1AC4 x Speed Controller - REB105 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Elta ACO Panel 149-ACO18B1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6303 x Systemair Save Connect 2.0 Internet Module1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EC-Vent Room Unit3 x REB-CVF 0-10v Controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5004 x Transformer Speed Control - RTRE- 7.0Amp1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x EM30-24 Control Panel Commissioning Service2 x Helios PU10 Speed Potentiometer (Flush Mounted)4 x SG-200 Fan Guard for the HQW 2005 x MTP 10, 10K, Speed control2 x PIR Sensor - PIR24 x Silent 100 Window Kit - windowS4 x CBM 9-9 550w 4P VR (Open Motor)2 x Vent Axia Silent 100T (TIMER)1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3555 x Transformer Speed Control - RTRE- 1.5Amp5 x MTS10- extractor fan 3 step switch2 x KKS 100 silencer-section - For use with the MUB 100 size Fans.4 x Helios HQW-250/4 - IP555 x Speed Controller - REB13 x PIR Sensor - PIR45 x QPTW 250C Acoustic Twin Fan with Controller2 x UB47- Universal Insulated Terminal2 x Envirovent 4 Way Remote Control Switch - SWHBKRF-44 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Transformer 5 Speed Controller - ATC1-8TK5 x Transformer 5 Speed Controller - ATC1-4TK2 x Transformer 5 Speed Controller - ATC1-10TK2 x CS2 Current Switch1 x Insulated extract Plenum 8+11 x Insulated extract Plenum 6+12 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x REE-1 Electronic Speed Controller3 x Helios HQW-630/4 - IP551 x Transformer Speed Control - RTRE- 12.0Amp3 x Airvent ceiling fan controller1 x TG-R room temperature sensor3 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS4 x Helios HQW-315/4 - IP552 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)2 x CBA-60 Inlet Flange for CBT-603 x Speed Controller - REB82 x TG-K Duct temperature sensor1 x Elta Wall Cowl SWC56/631 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x ELM 25 EX Flexible Cuff for ERM 254 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x DEF-CBM-RE-7 - Protection Guard2 x Speed Controller - REB2.5-N1 x GRA-100 External Grill by S&P1 x 220x90mm Insulated Rectangular Horizontal 45° Bend3 x Elta - Room Sensor - Temp/Humid/C021 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x Elta Louvre Shutter - 400mm2 x Mini Diffuser - 100mm3 x Temperature Fan Speed Controller - ATCP4-WMS2 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Transformer speed controller - ATC1 - 1.5 Amps2 x Helios TSW 10 Amp Transformer speed controller1 x Vent Axia SC5001 - Speed controller1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Speed Controller - REB34 x TG-K3/NTC10-01 - Duct temperature sensor1 x TD Mixvent 800/200 EEXEIIT32 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)3 x DDMP 12-12 3F 1810W M6A4 DG01 x TUNE-R-200-3-M4 - Control Damper1 x Elta Wall Cowl SWC35/401 x Elta Wall Cowl SWC25/311 x 220x90mm Insulated Rectangular Vertical 90° Bend4 x VTR 300 STD Filter Kit3 x DDMP 10-08 3F 2210W M6A4 DG01 x Elta Wall Cowl SWC45/502 x CBT-100N Centrifugal1 x GXC6EC - High Performance Extract Fan1 x ELM 20 EX Flexible Cuff for ERM 221 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x RDS 7 Helios Transformer Controller With Motor Protection2 x Transformer Speed Control - RTRE- 5.0Amp2 x Speed Controller - REB1-N1 x Contactor Interface Station - CI93 x CPTA-E Flush mounted PIR sensor with timer3 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x GENIOX 11 Internal Mounted Unit4 x Transformer 5 Speed Controller - ATC1-2TK2 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Jet Cowl - 315mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Silentub - STUB 1002 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x Duct Termination with Mesh - 355mm1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x Speed Controller - REB161 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Elta Standard Ambient Flexible Connector - 560mm2 x Compact SCD450/4-1AC1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Speed Controller - REB61 x REE-2 Electronic Speed Controller1 x Electrostatic Precipitator - 1H x 3W2 x MWS 5 – Transformer Controller With Motor Protection Unit1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp2 x Vortice Quadro Micro 100 I - Standard Version1 x Polyurethane Foam Media - 10PPI - Filter Media Sheets - Size: 2000mm x 1000mm1 x ACO8AC/EC AutoChangeover panel1 x Helios RR-250-C Centrifugal inline fan1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x CO2 Room Sensor - CO2-R1 x TUNE-R-200-3-M2 - Control Damper1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x TEM 075 - 5 Speed Transformer Speed Control1 x ELM 18 EX Flexible Cuff for ERM 181 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x Duct Termination with Mesh - 710mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x TD160-NT Mixvent - 100mm - TD160 Timer1 x RSK355 - Back Draught Shutter1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CSB-60 Centrifugal fan
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...