• Model:FSD-TD150

FSD-TD 150mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)

£ 375.00 (excl. VAT)

£ 450.00 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.
PDF Files


Data Sheet

1 x Etamaster EM 400 EC 01 inline mix-vent fan1 x Etaline 450mm -EC (Three Phase)1 x Ancillary Pack for SB-Biflow 400 model1 x CBM 9/7 4p 420W RE-VR1 x Acopel F400-250/1601 x Impeller Side Guard - 250mm1 x Acopel F400-800/1802 x Acopel F400-500/1601 x Blast Gate (Manual) 125mm1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x KV DUO 150 EC1 x Air Trak Heater-100mm1 x FSAF355B1DX Silencer 395/81 x Helios GigaBox 560mm GBW 560/4 centrifugal1 x Manrose Auto Shutter - XF150AP1 x Elta SCP500/4-3AC - IP551 x Etaline Max-Fan - 315mm - E2 011 x WSD 042 (730x730x70)1 x Round ceiling diffuser 350mm1 x AKOR Spare Filter1 x Metal Inline Fan - VENT-160NK1 x JETLINE-200 - In Line Centrifugal Duct Fan1 x HA-600 SLIM Cooker Hood - Stainless Steel1 x Circular Ceiling Diffuser - TST 1251 x Nicotra AFK 315-40/4M-B1 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x Elta Unpodded Silencer Melinex 1D-560mm1 x Elta Turboflow-TF - 630mm - Single phase1 x Elta SCP630/4-3AC - IP551 x 150mm - 100mm Round Reducer1 x Elta SLC400-1EC -IE5 Motor- IP551 x Rotorex HXBR 250mm Plate Axial Fan - Single Phase (2-pole)1 x Elta SLC1000/4B-3AC - IP551 x KV DUO 500 EC (3Ph-400v) with changeover1 x CBM 9-9 550w 4P CM 3-Phase1 x Kitchen Extract Grille with Grease Filter and External Wall Fan1 x KD 250 L1 Circular duct fan1 x 125mm - 100mm Round Reducer1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Impeller Side Guard - 400mm1 x PREP/COOK Switch for use with TCBTx2 PACK's1 x 220x90mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm1 x 125mm Insulated 90 Degree Bend1 x Airvent ceiling fan controller1 x CBM 12/9 CM/AL 1100W 6PT - Closed Motor1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Access Door 450mm x 450mm1 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x EC-Vent Room Unit1 x Elta SPA315/4-1AC - IP441 x TTC-2000 Three phase electric heater controller1 x Economy Airvent 100mm Fan with Timer/Humidistat/Pullcord1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x Soler & Palau - HCBT/4-630/H - IP651 x Chaysol SAP 18/8 1.5kW 700r.p.m. CC CW V5-single inlet centrifugal fan1 x Elta SPA710/4/6-3AC - IP541 x BEAS-control module1 x CBP-DC 18/181 x Etaline 400mm1 x 204x60mm Double Airbrick Adapter1 x DA 15/15 Feet1 x Genius Whole house unit -1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Etamaster EM 200 EC 01 inline mix-vent fan1 x Access Door 200mm x 200mm1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Belt Drive Cased Axial Fan - 800mm - H version1 x Wall Mounted Air Curtains - COR-N Series1 x 110 x 54mm Flat Channel Connector1 x Helios HQW-630/4 - IP551 x HCFT/4-315mm plastic impeller plate fan1 x CBB-80N Centrifugal1 x Soler & Palau - HCBT/4-900/L - IP551 x JETLINE-125 - In Line Centrifugal Duct Fan1 x CBS-100 Outlet Flange for CBT-1001 x CBM 12-12 1100w 6P Three Phase1 x Helios TSW 5 Amp Transformer speed controller1 x CBMT/Q 315-90 3 HEATER KIT1 x CBA-80 Inlet Flange for CBT-801 x Vent Axia KAF Kitchen Extract Fan - 630mm - 2 Pole - Three Phase1 x Spiral Ducting Additional Courier Surcharge1 x Ancillary Pack for SLC-5001 x 150mm Round 45 Degree Bend1 x HRT/6-630/35-BZ E111 x 204x60mm Flat Channel Clip (Pack of 5)1 x Belt Drive Cased Axial Fan - 500mm - L version
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...