• Model:FSD-TD350350

FSD-TD 350 x 350 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)

£ 395.00 (excl. VAT)

£ 474.00 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.
1 x MVEx 1,0 Atex Motor Protection Switch1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x Soler & Palau - HCBT/4-800/H - IP551 x Flat Roof Terminal -OFT 5 - Ashphalt1 x Roof Axial Cowl - RAW450 in RAL9005 ( JET BLACK)1 x ILTM-500/560/630 - Motor Cover for ILHT Fans - 51337593001 x Duct Wrap Insulation - AWDW25mm1 x EBM Papst W3G630-GG97-011 x GB-WSG 450 External Weather Louvers for the Giga-Box Fans - 450mm1 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x CAB-200 ECOWATT Energy Efficient Acoustic Box Fan1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x Ancillary Pack for SB-Biflow 250 model1 x Ancillary Pack for SB-CYL 630 model1 x Ancillary Pack for SB-Biflow 400 model1 x Rosenberg AKAD 630-4 A1 IP54 400V 50H1 x JETLINE-160 - In Line Centrifugal Duct Fan1 x Purlin Box 1000 for RAW Cowls1 x Access Door for Circular Duct - 400 x 300 - SIZE 501 x 204x60mm 90 Degree Horizontal Bend1 x Classic SAX23/9A Window/Wall Mounted1 x Ductwrap Insulation DW502 x Elta Wall Cowl SWC25/312 x ACOAS/ AC/EC Auto Changeover 8Amp1 x MTS10- extractor fan 3 step switch1 x Acopel F400-280/1601 x CBMT/Q 150-15 1 HEATER KIT1 x Circular Ceiling Diffuser - TST 1251 x CBMT/Q 315-54 1 HEATER KIT1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan2 x Elta Powder Coated Cased Axial Flange - 630mm2 x Elta SLC355-1EC -IE5 Motor- IP551 x AKOR Mounting Plate for GD model(VIM166423)1 x 125mm Round Connector1 x Impeller Side Guard - 315mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Round ceiling diffuser 200mm2 x TUNE-R-160-3-M2 - Control Damper2 x Ancillary Pack for SLC-5001 x Vent Axia KAF Kitchen Extract Fan - 630mm - 2 Pole - Single Phase1 x 204x60mm x 500mm Long Hi-Flow Duct Silencer1 x CBMT/Q 315-30 1 HEATER KIT1 x Kitchen Grease Filter - Mesh Type NON standard 390mm x 240mm x 40mm Actual1 x Belt Drive Cased Axial Fan - 800mm - H version1 x Same Day Shipping Surcharge1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Soler & Palau - HCBT/2-250/H - IP651 x Atex Motor Protection Switch - U-EK230E EX1 x Belt Drive Cased Axial Fan - 800mm - L version1 x Elta Quietflow Twin SQT200-1ECL1 x OZEO E ECOWATT Wireless Switch - OZEO-ECO-W1 x TD Mixvent 1200/315 EEXEIIT31 x Synthetic Air Filter Media - 6mm x 2mtr x 5mtr Roll1 x MTG FEET & ANTI VIB. MOUNTS (SET OF 4) for MFQ560/4/31 x FSD-TD 350mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x Elta Variable Speed Drive IP66 - 5.5KW1 x CBM 7/7 147w 4P RE-VR1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Systemair AW Sileo 710-DS1 x 204x60mm Double Airbrick Adapter1 x DEF-1000-AN1 x Etamaster EM 200 EC 01 inline mix-vent fan1 x GXC9 - High Performance Extract Fan1 x Etaline 630mm - D4 01 3 Phase1 x Helios GigaBox 450mm GBD 450 centrifugal - EC Motor1 x AW Sileo EC Plate Axial Fan - Three Phase - 630mm1 x Ancillary Pack for SB-Biflow 500 model1 x Soler & Palau - HCBT/4-800/L-AX - IP551 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan1 x Elta Quietflow Twin SQT500-1ECL1 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x TUNE-R-100-2-M4 - Control Damper1 x Etaline 200mm E2M 01 3-Speed1 x HD-LL Series 600x6001 x Synthetic Air Filter Media - 10mm x 2mtr x 20mtr Roll1 x Elta Quietflow Twin SQT250-1ECL1 x ZAC- 450 -4-11 x Elta SCP450/4-3AC - IP551 x Jetflow-HIT Metal inline - 150mm1 x JBS-1250 Flat Roof Upstand for HCTT/4-1000/B1 x Elta SLC1000/4A-3AC - IP55
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...