• Model:FSD-TD350

FSD-TD 350mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)

£ 495.00 (excl. VAT)

£ 594.00 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.
1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Access Door 450mm x 450mm1 x Elta Podded Silencer 1D- 710mm1 x Elta Wall Cowl SWC35/401 x Elta EC Electronic Controller1 x Cased Axial Fan Extension - 400mm dia1 x Helios GigaBox 560mm GBD 560/4/4 centrifugal1 x BDS 630/710 RA b/d shutter1 x Circular Ceiling Diffuser - TST 1601 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x CBMT/Q 150-15 1 HEATER KIT1 x EKHR 280-2SW BCMI1 x Acopel F400-355/1601 x Acopel F400-900/1802 x Etaline 710mm - D4 02 3 Phase1 x NON-STD FSD-TD Fire and Smoke Damper - 230V - 210mm x 100mm1 x Elta SLC800/4B-3AC - IP551 x Elta Turboflow-TF - 500mm(B) - Three phase1 x Direct AM Delivery Surcharge1 x AKOR Spare Filter1 x Jetflow-HIT Metal inline - 150mm1 x DEF-1000-AN1 x Soler & Palau TCBT/4-800/G - IP651 x ECO-500 Kitchen Extract Fan1 x Kitchen Grease Filter - Mesh Type Non standard 275mm x 180mm x 22mm1 x Elta Cased Axial Flange - 250mm1 x CBT-60N Centrifugal1 x Elta SLC560/2-3AC - IP551 x Soler & Palau TCBB/4-400/H - IP441 x HCFT/4-315mm (B-FLOW) plastic impeller plate fan1 x Frequency converter FU 075 14 - IP661 x CBMT/Q 315-90 3 HEATER KIT1 x Elta SLC500/2A-3AC - IP551 x EM 150L-E2M 01- Etamaster-1501 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Pre 10:30 Delivery Surcharge1 x Acoustic MiniBox Fan - MINI-BOX 1001 x CBM 7/7 147w 4P RE-VR1 x Jetflow-HIT Metal inline - 250mm1 x EBB-175 S DESIGN Centrifugal Extractor Fan1 x Belt Drive Cased Axial Fan - 800mm - L version1 x Soler & Palau HXM-300mm1 x Flat Roof Terminal -OFT 5 - Ashphalt1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x Capacitor 20uf for use with the EBM D2E range1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x KV DUO 500 EC (3Ph-400v) with changeover1 x Soler & Palau TCBT/4-560/H - IP651 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x CC-ATEX 404 B M Short Cased Axial Fan1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x Elta Variable Speed Drive IP66 - 2.2KW1 x HRT/4-500/35-BPN1 x Soler & Palau - HXBR-200 ECOWATT - IP442 x Silentub - STUB 1001 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Control with reverse - CR3001 x Elta Variable Speed Drive IP66 - 7.5KW1 x Duct Clamps box of 50 - 60mm - 270mm1 x Rosenberg DQ 630-4 plate axial fan1 x Direct Saturday Delivery Surcharge1 x Acopel F400-315/1601 x Elta SLC900/4A-3AC - IP551 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x Soler & Palau - HCBB/6-630/H - IP651 x Helios HQW-630/6 - IP551 x BDS 400/450 RA b/d shutter1 x EBM Papst W3G630-GG97-011 x Helios GigaBox 560mm GBW 560/4 centrifugal1 x AL 400 D2 01 AXIALINE - High Performance Long Cased Axial Fan1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 6 Pole 200watt VR RE1 x Soler & Palau - HCBT/6-1000/H - IP551 x Helios HQW-450/6 - IP551 x B-flow Impeller HCBB/T-560mm1 x Etaline 355mm - E2-011 x Belt Drive Cased Axial Fan - 500mm - H version1 x Quietflow Twin SQTDCV315-1ECL1 x CBMT/Q 400-9 3 HEATER KIT1 x HCFT/4-5001 x Soler & Palau TCBT/6-450/H - IP651 x PREP/COOK Switch for use with TCBTx2 PACK's1 x Elta HWFA-650 Oscillating Wall Fan1 x Anti Vibration Mounts - Small - Pack of 4 - AVM22 x Etaline Max-Fan - 315mm - E2 011 x BDS 300/315 RA b/d shutter1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-12000/560 ND - Pack 81 x Duct Humidistat - HS3_hdt1 x Elta Standard Ambient Flexible Connector - 315mm1 x Roof Axial Cowl - RAW450 in RAL9005 ( JET BLACK)1 x TXBR/4-450-C1 x WSD 042 (730x730x70)1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x 220x90mm Rectangular to 150mm Round Adaptor1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 400mm1 x TUNE-R-100-3-M4 - Control Damper1 x Chaysol SA 25/13 -single inlet centrifugal fan1 x Soler & Palau - HCBT/4-1000/H-X - IP551 x Atex Motor Protection Switch - U-EK230E EX1 x Elta 3 Amp Electronic single phase speed controller with TK1 x 125mm Round Connector1 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Single Phase1 x Acopel F400-250/1601 x CMB/4-140-050 0.06Kw LG 2701 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x CTVB/4-315 Kitchen/High Temp Roof Fan1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Duct Humidistat - HS4_hdt1 x Blast Gate (Manual) 180mm1 x Elta SCP250/4-1AC - IP551 x HRT/6-630/35-BZ E11
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...