• Model:FSD-TD350

FSD-TD 350mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)

£ 495.00 (excl. VAT)

£ 594.00 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.
1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Dektite Combo Pipe Flashing - DC210REC1 x Economy Airvent 100mm Fan with Timer/Humidistat/Pullcord1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Elta Cased Axial Flange - 630mm1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Jetflow-HIT Metal inline - 150mm1 x Wall Mounted Air Curtains - COR-N Series1 x Mounting Feet (Pair) for SLC-630-060B-06301 x CADB/T-HE PRO-REG Series1 x Soler & Palau - HCBT/6-1000/H - IP551 x Economy Airvent 100mm Fan with Timer & Shutter1 x CBMT/Q 400-55 1 HEATER KIT1 x Insulated extract Plenum 6+12 x CBMT/Q 400-9 3 HEATER KIT2 x U42K Screws for duct1 x HV STYLVENT Wall Kit Threaded Rods1 x HCFB/4-630mm plastic impeller plate fan1 x Elta SLC500/4B-1AC - IP551 x 220x90mm 45 Degree Vertical Bend1 x CRVT/4-500 N Roof mounted Fan - vertical discharge1 x Soler & Palau HXM-350mm1 x 125mm - 150mm Round Reducer1 x Topvex SF12 HWL. Supply AHU1 x Isolator Switch - EFF-ISO1 x Etaline Max-Fan - 315mm - E2 011 x Inclined Curb support BI-3 for TH-5001 x CK-60F Kit1 x ELTA - Single Phase Transformer 8amps1 x Helios GigaBox 400mm GBW 400/4 centrifugal1 x Raptor SDA500/4-1AC1 x HRU Controller1 x CADB/T-HE 54 ECOWATT Series1 x Compact SCD500/4-3AC1 x DA12/9 Feet1 x ERR 12/1 Centrifugal inline fan1 x Elta SLC500-1EC -IE5 Motor- IP551 x Soler & Palau TCBT/4-710/L - IP651 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt VR RE1 x Acopel F400-450/1601 x HCFT/4-250mm plastic impeller plate fan1 x Soler & Palau - HXTR/4-500/H - IP541 x 110 x 54mm Rectangular Wall Plate1 x 125mm Round Connector with Damper1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x B-flow Impeller HCBB/T-450mm1 x Helios GigaBox 250mm GBW 250/4 centrifugal
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...