• Model:FSD-TD600600

FSD-TD 600 x 600 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)

£ 550.00 (excl. VAT)

£ 660.00 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.
1 x Stainless Steel Single Blade Regulating Damper -200mm1 x Access Door for Circular Duct - 300 x 200 - SIZE 501 x Ancillary Pack for SLC-5001 x MFA-AR/AXC 315 mounting foot1 x HCFB/4-400mm plastic impeller plate fan1 x CRBB/3-250/084M EC 2H01 x DDMP 10-10 FLANGE1 x Helios HQW-200/2 - IP551 x 204x60mm Equal T Piece1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 515watt VR RE1 x Elta Wall Cowl SWC45/501 x Insulated extract Plenum 6+11 x 100mm - 125mm Round Reducer1 x CADB/T-HE 54 ECOWATT Series1 x Metal Inline Fan - VENT-355N1 x Helios GigaBox 355mm GBD 355/4/4 centrifugal1 x Elta Unpodded Silencer 1D-250mm1 x SEL355/2-1AC1 x Etaline 355mm - E2-011 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x Etaline 355mm - D2 01 3 Phase1 x Etaline 355mm E4 011 x DEF-800AN1 x K 200 L Sileo1 x 150mm Round Wall Plate1 x Elta Standard Ambient Flexible Connector - 450mm1 x Elta SCP560/4-1AC - IP551 x Helios GigaBox 400mm GBD 400/4/4 centrifugal1 x SG AW 910 Guard grille (GFC)1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x JETLINE-200 - In Line Centrifugal Duct Fan1 x 150mm - 100mm Round Reducer1 x FSAF315B2DX Silencer 355/81 x ACO3TO-ADS-VFC-7.1A1 x HRT/4-630/25-BPN E221 x CBMT/Q 400-55 1 HEATER KIT1 x KV DUO 400 EC1 x IDEO 325 Ecowatt1 x Soler & Palau TCBB/6-500/H - IP651 x Impeller Side Guard - 400mm1 x Commercial Activated Carbon Filters - Panel Type - 18" x 18" x 1 - ACP1 x Etaline 710mm - D4 02 3 Phase1 x Metallic Kitchen Extractor - CK35N1 x EVL Filter G4 grade for PIV units1 x TUNE-R-160-3-M2 - Control Damper1 x Elta Cased Axial Flange - 400mm1 x HRB/6-630-30-APN1 x DV-ROF-V-315 Roof mounted unit1 x Synthetic Air Filter Media - 10mm x 2mtr x 5mtr Roll1 x Acopel F400-120/1601 x WSD 042 (730x730x70)1 x Elta SLC450-1EC -IE5 Motor- IP551 x Binks Bullows - Spray Booth Filter1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-3AC - Three Phase1 x TecFire Intumescent Damper - Rectangular 250x250mm1 x Soler & Palau - HCBB/4-630/H -IP651 x Jetflow-HIT Metal inline - 200mm1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-9000/500 ND - Pack 71 x Biflow SB315-CON4-1 - High Temperature Bifurcated Fan1 x HCFT/4-800mm plastic impeller plate fan1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x CPTA-E Flush mounted PIR sensor with timer1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x Delivery Surcharge1 x Acopel F400-630/1601 x Etaline 280mm1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Acopel F400-710/1801 x Differential Pressure Switch - 20 - 300 Pa - IP651 x 100mm Round Wall Plate1 x CMB-2-140-050 0.25Kw LG O1 x Rotorex HXBR 250mm Plate Axial Fan - Single Phase (2-pole)1 x Etaline 315mm - E2 03 (Low Power Version)1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x CBM 10/10 4 Pole 550watt RE VR (3 Phase)1 x BDS 200/250 RA b/d shutter1 x External weather louvre 500w x 500h - WL501 x 220x90mm 45 Degree Vertical Bend1 x Belt Drive Cased Axial Fan - 560mm - L version1 x KRJ - 250 Inlet Guard1 x Airvent ceiling fan controller1 x Soler & Palau - HXBR/4-315/H - IP541 x 316 grade Stainless Steel Jet Cowl Ventilation Outlet - 500mm1 x Elta SLC400/4-1AC - IP551 x Elta SCP250/4-1AC - IP551 x Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau1 x Acopel F400-500/1601 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x Etaline 400mm D2-01 3-phase1 x TXBR/4-450-C1 x Raptor SDA560/4-1AC1 x SPI-200 C Iris damper1 x 125mm - 150mm Round Reducer1 x Elta SCP400-1EC - IP551 x Acopel F400-315/1601 x FU 075 03 Frequency Converter (IP55 Version)
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...