• Model:FSD-TD70-15

FSD-TD Fire and Smoke Damper, 700mm x 150mm, EASY FIX AF, GALV Case, GALV Blades, PM24-TF

£ 330.00 (excl. VAT)

£ 396.00 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.

Customers also purchased...

1 x Access Door for Circular Duct - 300 x 200 - SIZE 501 x Air Trak Heater-100mm1 x CBMT/Q 315-54 1 HEATER KIT1 x DA12/12 Feet1 x Access Door for Circular Duct - 300 x 200 - SIZE 351 x Purlin Box 500/560 for RAW Cowls1 x HA-900 N Cooker Hood1 x Elta Wall Cowl SWC25/311 x Helios DDF-315 Roof Cowl1 x Soler & Palau - HXBR/4-400/H - IP542 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x KBA- inlet mounting flange for CRMT 2251 x Helios DDF-400 Roof Cowl1 x Jetflow-HIT Metal inline - 150mm1 x Soler & Palau - HXBR/4-560/H - IP541 x CBM 12/9 CM/AL 1100W 6PT - Closed Motor1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/6-15000/710 ND - Pack 101 x GB-WSD 450 Weather Protection hood for the Giga-Box Fans - 450mm1 x BDS 630/710 RA b/d shutter1 x B-flow Impeller HCBB/T-355mm1 x Stainless Steel IL Flanged Spigot-400mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x DDMP 10-10 FLANGE1 x Elta SLC450/4-3AC - IP551 x Elta SCP560/4-3AC - IP551 x ERR 12/1 Centrifugal inline fan1 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Double Inlet Forward Curved Centrifugal Fans - FDA-225-C1 x GXC9 - High Performance Extract Fan1 x Frequency converter RUCK - FU 075 211 x Metal Inline Fan - VENT-125NK1 x HCFB/4-450mm plastic impeller plate fan1 x Silentub - STUB 2002 x AW Sileo EC Plate Axial Fan - Three Phase - 560mm1 x Elta SLC1000/6B-3AC - IP551 x MEV 160 & 300 Additional Spigots1 x Carriage1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 400mm1 x CBS-100 Outlet Flange for CBT-1001 x Duct Mounted Filter Box With Paper G2 AND Metal Washable Filter - 250mm1 x Manual Overide Switch - MOS1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x EM 150L-E2M 01- Etamaster-1501 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-12000/560 ND - Pack 81 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x Access Door 450mm x 450mm1 x Miniflow SMF Horizontal Roof Cowl SMF131 x Elta Standard Ambient Flexible Connector - 1000mm1 x JETLINE-160 - In Line Centrifugal Duct Fan1 x CBM 10/10 - 373watt - 6 Pole1 x PIR Sensor - PIR41 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Helios HQW-630/4 - IP551 x 100mm Round Wall Plate1 x SEL355/2-1AC
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...