• Model:GasInt-002

Gas Interlock system with Gas On Lamp

£ 184.74 (excl. VAT)

£ 221.69 (inc. VAT)

The GVI-002 is a gas interlock control system that can be used with either pressure switches or current sensors to monitor fans and enable the electrical supply to a gas valve actuator..

Control panel features
• Airflow off lamp
• Airflow on lamp
• Gas on lamp
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-002 has connections for 2 current sensors. When fan current flow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled, the gas on lamp will light. When there is a loss of fan current the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts. If a supply fan current sensor is fitted then both supply and extract fan current flow is to be proved before the airflow on lamp lights and the electrical supply to the gas valve actuator is enabled.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch/current sensor for supply fan • Pressure switch/current sensor for extract fan • Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-002 has connections to allow the fitting of a remote emergency stop button if required. Ask for details. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

1 x REE-1 Electronic Speed Controller1 x UB47- Universal Insulated Terminal1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x FU 075 52 Frequency Inverter (IP20)1 x FRQ-10A V2 Inverter Speed controller1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x FU 15 40 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Elta Variable Speed Drive IP66 - 4.0KW1 x FU 22 25 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 0.75KW1 x FRQ5-4A V2 Inverter Speed Controller1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x FU 15 16 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 5.5KW1 x FRQ5-10A Inverter Speed controller1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x ELTA - Three Phase Transformer 10amps1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x ELTA - Three Phase Transformer 3amps1 x FU 22 04 Frequency Inverter1 x Frequency converter RUCK - FU 075 211 x Elta 10 Amp Electronic single phase speed controller.1 x FU 075 04 Frequency Inverter (IP20)1 x ELTA - Single Phase Transformer 2amps1 x Electronic extractor fan speed controller - FSC 1.51 x EC6H - Reversible Group Fan Electronic Controller1 x Elta 2 Amp Electronic single phase speed controller.2 x Elta 3 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x ELTA - Single Phase Transformer 8amps1 x Airvent ceiling fan controller1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x ELTA - Single Phase Transformer 12amps1 x Elta 3 Amp Electronic single phase speed controller.1 x EFSC-3N- Single Phase Speed Control3 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 4amps1 x AIRVENT speed control - AIR4019613 x COM-31 x EFSC-6N- Single Phase Speed Control1 x Elta 6 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 10amps1 x Run On Timer - 5s - 4hrs - RT5A1 x Remote Timer Control - 13513 x Push Timer Switch - ZA41 x Helios ZNE Electronic Fan Overrun Timer2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x 7 Day Programmable TIMECLOCK1 x Two Speed Switch - REGUL-21 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO8AC/EC AutoChangeover panel1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x Vent Axia ACM 150 inline mixed flow duct fan1 x Helios TSW 7.5 Amp Transformer speed controller3 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Remote controller FLEX - for VEKO INT1 x Helios TSW 0.3Amp Compact Transformer speed controller2 x Helios TSW 3 Amp Transformer speed controller1 x Systemair Save Connect 2.0 Internet Module2 x Vent Axia ACM 100 inline mixed flow duct fan1 x Helios TSW MCB Amp Transformer speed controller1 x Helios TSW 1.5 Amp Transformer speed controller1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x TG-K Duct temperature sensor1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-42 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Transformer 5 Speed Controller - ATC1-10TK2 x Vent Axia ACM 125 inline mixed flow duct fan2 x CS2 Current Switch2 x BEAS-control module1 x Transformer 5 Speed Controller - ATC1-8TK1 x Helios HQW-200/2 - IP551 x Elta ACO Panel 149-ACO14E1 x Isolator Switch - ISOSW1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent control board1 x Envirovent G4 Filter - SL-G4/F71 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x MWS 1.5 – Transformer Controller With Motor Protection1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Temperature Fan Speed Controller - ATCP4-WMS
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...