• Model:GasInt-002

Gas Interlock system with Gas On Lamp

£ 184.74 (excl. VAT)

£ 221.69 (inc. VAT)

The GVI-002 is a gas interlock control system that can be used with either pressure switches or current sensors to monitor fans and enable the electrical supply to a gas valve actuator..

Control panel features
• Airflow off lamp
• Airflow on lamp
• Gas on lamp
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-002 has connections for 2 current sensors. When fan current flow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled, the gas on lamp will light. When there is a loss of fan current the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts. If a supply fan current sensor is fitted then both supply and extract fan current flow is to be proved before the airflow on lamp lights and the electrical supply to the gas valve actuator is enabled.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch/current sensor for supply fan • Pressure switch/current sensor for extract fan • Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-002 has connections to allow the fitting of a remote emergency stop button if required. Ask for details. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

1 x Elta 10 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 2amps1 x Circular Ceiling Diffuser - TST 1251 x Balance S Diffuser - NO RING - 125mm3 x Electronic extractor fan speed controller - FSC 1.51 x PCA Diffuser - PCA-3151 x Circular Ceiling Diffuser - TST 1002 x EC6H - Reversible Group Fan Electronic Controller1 x Circular Ceiling Diffuser - TST 2001 x Elta 2 Amp Electronic single phase speed controller.1 x Curved Blade Grille 600x600 (2way blow)1 x JSR 200 Painted RAL50181 x 5-Speed Controller for use with Elta SAX Classic Fans2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Round ceiling diffuser 400mm2 x Airvent ceiling fan controller1 x ELTA - Single Phase Transformer 16amps1 x ELTA - Single Phase Transformer 8amps1 x Elta 3 Amp Electronic single phase speed controller.1 x Circular Ceiling Diffuser - TST 1601 x EFSC-3N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 12amps1 x COM-31 x ELTA - Single Phase Transformer 4amps1 x AIRVENT speed control - AIR4019611 x Balance S Diffuser - NO RING - 100mm1 x Round ceiling diffuser 200mm1 x EFSC-6N- Single Phase Speed Control1 x Round ceiling diffuser 300mm1 x PCA Diffuser - PCA-2501 x Round ceiling diffuser 250mm1 x Round ceiling diffuser 350mm1 x ELTA - Single Phase Transformer 10amps1 x Run On Timer - 5s - 4hrs - RT5A3 x Remote Timer Control - 13513 x Push Timer Switch - ZA41 x Helios ZNE Electronic Fan Overrun Timer1 x Time Delay Unit - DT20B3 x Multi Input Run On Timer - 0 - 20min - CFCU1 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV1 x Elta ACO Panel 149-ACO18B1 x Systemair Save Connect 2.0 Internet Module1 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT1 x REB-CVF 0-10v Controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Silent 100 Window Kit - windowS1 x Elta Wall Cowl SWC56/631 x GRA-100 External Grill by S&P2 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x Vent Axia ACM 150 inline mixed flow duct fan2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x BEAS-control module2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted2 x Speed Controller - REB52 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x Transformer 5 Speed Controller - ATC1-4TK1 x Transformer 5 Speed Controller - ATC1-8TK1 x Transformer 5 Speed Controller - ATC1-12TK2 x Helios TSW 3 Amp Transformer speed controller1 x Helios TSW MCB Amp Transformer speed controller1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-10TK1 x Vent Axia ACM 125 inline mixed flow duct fan1 x CS2 Current Switch1 x Isolator Switch - ISOSW2 x MWS 3 – Transformer Controller With Motor Protection1 x TG-K Duct temperature sensor1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x Elta 6 Amp Electronic single phase speed controller with TK2 x WS - Reversing Switch from Helios Fans2 x Helios HQW-630/4 - IP553 x Transformer (silent) speed controller - RE 3.0 Amp1 x Transformer Speed Control - RTRE- 12.0Amp2 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x Vent Axia T-Series Controller1 x Multiflow SMB550/4-1AC1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Transformer (silent) speed controller - RE 5.0 Amp1 x Elta Variable Speed Drive IP66 - 2.2KW1 x MTP 10, 10K, Speed control1 x Temperature Fan Speed Controller - ATCP4-WMS
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...