• Model:GasInt-001

Gas Interlock system with Keyswitch

£ 180.54 (excl. VAT)

£ 216.65 (inc. VAT)

The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas valve actuator. Ask for details of other switches/sensors required.

Control panel features
• Airflow off lamp
• Airflow on lamp
• Keyswitch for normal/gas off
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-001 has connections for 2 pressure/current switches. These switches are wired to the panel using the normally open contacts, which close when there is airflow present. The pressure switches are required to have closed contacts (airflow present) for the electrical supply to be available to the gas valve actuator.

When airflow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled. When there is a loss of airflow the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch for supply airflow proving
• Pressure switch for extract airflow proving
• Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-001 has connections to allow the fitting of a remote emergency stop button if required. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Elta Variable Speed Drive IP66 - 2.2KW1 x FRQ-10A V2 Inverter Speed controller1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x FRQ5-4A V2 Inverter Speed Controller1 x Helios TSD 5.5 Transformer Speed Control (400v)1 x FU 15 40 Frequency Inverter1 x FU 075 52 Frequency Inverter (IP20)1 x FU 22 25 Frequency Inverter2 x Elta Variable Speed Drive IP66 - 0.75KW1 x Frequency converter RUCK - FU 075 201 x Elta Variable Speed Drive IP66 - 4.0KW1 x FRQ5-10A Inverter Speed controller1 x FU 15 16 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Frequency converter RUCK - FU 075 381 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x ELTA - Three Phase Transformer 3amps1 x ELTA - Three Phase Transformer 10amps1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Elta 10 Amp Electronic single phase speed controller.1 x Frequency converter RUCK - FU 075 211 x FU 22 04 Frequency Inverter1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x NKS-D swirl diffuser v-300 x 300mm1 x Circular Ceiling Diffuser - TST 1251 x ELTA - Single Phase Transformer 2amps1 x PCA Diffuser - PCA-3151 x Balance S Diffuser - NO RING - 125mm1 x Circular Ceiling Diffuser - TST 1002 x Electronic extractor fan speed controller - FSC 1.51 x Circular Ceiling Diffuser - TST 2001 x Round ceiling diffuser 400mm1 x EC6H - Reversible Group Fan Electronic Controller1 x JSR 200 Painted RAL50181 x Circular Ceiling Diffuser - TST 1601 x Elta 2 Amp Electronic single phase speed controller.1 x Versio Square Ceiling Diffusers - RS141 x Balance S Diffuser - NO RING - 100mm1 x EFSC-3N- Single Phase Speed Control1 x Elta 3 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 8amps3 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x Airvent ceiling fan controller1 x Elta 3 Amp Electronic single phase speed controller.1 x Round ceiling diffuser 200mm1 x ELTA - Single Phase Transformer 12amps1 x AIRVENT speed control - AIR4019611 x ELTA - Single Phase Transformer 4amps1 x Round ceiling diffuser 300mm1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Round ceiling diffuser 250mm3 x COM-31 x EFSC-6N- Single Phase Speed Control1 x Elta 6 Amp Electronic single phase speed controller.1 x Elta Variable Speed Drive IP66 - 0.75KW (1ph to 3ph)1 x PCA Diffuser - PCA-2501 x ELTA - Single Phase Transformer 10amps3 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A1 x Helios ZNE Electronic Fan Overrun Timer3 x Push Timer Switch - ZA43 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B2 x 7 Day Programmable TIMECLOCK1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp3 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan2 x Helios TSW 7.5 Amp Transformer speed controller1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x Vent Axia ACM 150 inline mixed flow duct fan1 x Three Phase Transformer controllers - RMT 1.5 Amp2 x Vent Axia ACM 100 inline mixed flow duct fan4 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Remote controller FLEX - for VEKO INT1 x RDS 11 Helios Transformer Controller With Motor Protection2 x Single phase speed controller by auto-transformer - RMB 3.5 Amp2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Transformer 5 Speed Controller - ATC1-8TK3 x Helios TSW 3 Amp Transformer speed controller2 x Transformer 5 Speed Controller - ATC1-12TK3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Transformer 5 Speed Controller - ATC1-10TK2 x Transformer 5 Speed Controller - ATC1-4TK2 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE3 x Vent Axia ACM 200 inline mixed flow duct fan2 x Helios TSW MCB Amp Transformer speed controller2 x Helios TSW 1.5 Amp Transformer speed controller1 x Helios TSW 0.3Amp Compact Transformer speed controller4 x Vent Axia ACM 125 inline mixed flow duct fan1 x DEF-140T Inlet Guard for the CBT-100N1 x Systemair Save Connect 2.0 Internet Module2 x MV-B Dual Switch for use with Helios HQW plate fans,3 x MWS 3 – Transformer Controller With Motor Protection1 x Isolator Switch - ISOSW1 x CS2 Current Switch2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT4 x MWS 1.5 – Transformer Controller With Motor Protection5 x WS - Reversing Switch from Helios Fans1 x Two Speed Switch - REGUL-22 x Helios HQW-200/2 - IP551 x Envirovent G4 Filter - SL-G4/F73 x Vent Axia T-Series Controller2 x Helios HQW-630/4 - IP551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5003 x Transformer (silent) speed controller - RE 3.0 Amp1 x TG-K3/NTC10-01 - Duct temperature sensor1 x CBS-60 Outlet Flange for CSB/CBT-601 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x REE-1 Electronic Speed Controller1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Easy-fix termination kit - High Rise Ventilator - EFT3 x Helios HQW-200/4 - IP551 x Transformer (silent) speed controller - RE 1.5 Amp2 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Transformer Speed Control - RTRE- 12.0Amp1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x Transformer 5 Speed Controller - ATC1-2TK1 x Speed Controller - REB31 x RRB- transformer controller
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...