• Model:GasInt-001

Gas Interlock system with Keyswitch

£ 180.54 (excl. VAT)

£ 216.65 (inc. VAT)

The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas valve actuator. Ask for details of other switches/sensors required.

Control panel features
• Airflow off lamp
• Airflow on lamp
• Keyswitch for normal/gas off
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-001 has connections for 2 pressure/current switches. These switches are wired to the panel using the normally open contacts, which close when there is airflow present. The pressure switches are required to have closed contacts (airflow present) for the electrical supply to be available to the gas valve actuator.

When airflow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled. When there is a loss of airflow the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch for supply airflow proving
• Pressure switch for extract airflow proving
• Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-001 has connections to allow the fitting of a remote emergency stop button if required. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

1 x CCpro 40 (1CC9402) Long Casing Extension1 x FSD-TD 450mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Impeller Side Guard - 900mm1 x FSD-TD 250 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x FSD-TD 300 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Elta Variable Speed Drive IP66 - 2.2KW1 x FRQ5-4A V2 Inverter Speed Controller1 x FRQ-10A V2 Inverter Speed controller1 x FU 15 40 Frequency Inverter1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x Frequency converter FU 075 14 - IP661 x Elta Variable Speed Drive IP66 - 0.75KW1 x FU 22 25 Frequency Inverter1 x FU 075 52 Frequency Inverter (IP20)1 x FRQ5-10A Inverter Speed controller1 x FU 15 16 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Frequency converter RUCK - FU 075 201 x Elta Variable Speed Drive IP66 - 4.0KW1 x FU 22 04 Frequency Inverter1 x ELTA - Three Phase Transformer 10amps1 x Elta 10 Amp Electronic single phase speed controller.1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x FU 075 04 Frequency Inverter (IP20)1 x Frequency converter RUCK - FU 075 211 x NKS-D swirl diffuser v-300 x 300mm1 x ELTA - Single Phase Transformer 2amps1 x Circular Ceiling Diffuser - TST 1001 x Electronic extractor fan speed controller - FSC 1.51 x PCA Diffuser - PCA-3151 x Balance S Diffuser - NO RING - 125mm1 x EC6H - Reversible Group Fan Electronic Controller1 x Circular Ceiling Diffuser - TST 2001 x Round ceiling diffuser 400mm1 x Curved Blade Grille 600x600 (2way blow)1 x Elta 2 Amp Electronic single phase speed controller.1 x JSR 200 Painted RAL50181 x Elta 3 Amp Electronic single phase speed controller with TK1 x Circular Ceiling Diffuser - TST 1602 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Balance S Diffuser - NO RING - 100mm1 x Elta 3 Amp Electronic single phase speed controller.1 x Airvent ceiling fan controller1 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 8amps1 x EFSC-3N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 16amps1 x Round ceiling diffuser 200mm1 x ELTA - Single Phase Transformer 12amps2 x COM-31 x Round ceiling diffuser 300mm1 x AIRVENT speed control - AIR4019611 x Round ceiling diffuser 250mm1 x EFSC-6N- Single Phase Speed Control1 x Round ceiling diffuser 350mm1 x Elta 6 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 10amps1 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A2 x Push Timer Switch - ZA41 x Helios ZNE Electronic Fan Overrun Timer1 x Time Delay Unit - DT20B3 x Multi Input Run On Timer - 0 - 20min - CFCU1 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV1 x Elta ACO Panel 149-ACO18B2 x Systemair Save Connect 2.0 Internet Module1 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x EM30-24 Control Panel Commissioning Service1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Transformer 5 Speed Controller - ATC1-12TK1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x RDS 11 Helios Transformer Controller With Motor Protection1 x Helios TSW MCB Amp Transformer speed controller1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Helios TSW 1.5 Amp Transformer speed controller1 x RDS 7 Helios Transformer Controller With Motor Protection1 x Helios TSW 10 Amp Transformer speed controller1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Vent Axia ACM 125 inline mixed flow duct fan1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x DEF-140T Inlet Guard for the CBT-100N1 x Transformer 5 Speed Controller - ATC1-8TK1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Isolator Switch - ISOSW1 x MWS 3 – Transformer Controller With Motor Protection1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x TG-K Duct temperature sensor1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-42 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...