• Model:GasInt-001

Gas Interlock system with Keyswitch

£ 180.54 (excl. VAT)

£ 216.65 (inc. VAT)

The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas valve actuator. Ask for details of other switches/sensors required.

Control panel features
• Airflow off lamp
• Airflow on lamp
• Keyswitch for normal/gas off
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-001 has connections for 2 pressure/current switches. These switches are wired to the panel using the normally open contacts, which close when there is airflow present. The pressure switches are required to have closed contacts (airflow present) for the electrical supply to be available to the gas valve actuator.

When airflow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled. When there is a loss of airflow the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch for supply airflow proving
• Pressure switch for extract airflow proving
• Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-001 has connections to allow the fitting of a remote emergency stop button if required. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

2 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x Elta Variable Speed Drive IP66 - 2.2KW1 x FU 15 40 Frequency Inverter1 x FRQ-10A V2 Inverter Speed controller1 x FRQ5-4A V2 Inverter Speed Controller1 x FU 075 52 Frequency Inverter (IP20)1 x Frequency converter FU 075 14 - IP661 x Frequency converter RUCK - FU 075 201 x Elta Variable Speed Drive IP66 - 1.5KW1 x FRQ5-10A Inverter Speed controller1 x FU 15 16 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x ELTA - Three Phase Transformer 3amps1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x FU 22 04 Frequency Inverter1 x Frequency converter RUCK - FU 075 211 x ELTA - Single Phase Transformer 2amps1 x NKS-D swirl diffuser v-300 x 300mm1 x Circular Ceiling Diffuser - TST 1251 x PCA Diffuser - PCA-3151 x EC6H - Reversible Group Fan Electronic Controller1 x Circular Ceiling Diffuser - TST 1001 x Circular Ceiling Diffuser - TST 2001 x Curved Blade Grille 600x600 (2way blow)1 x Round ceiling diffuser 400mm2 x Elta 3 Amp Electronic single phase speed controller with TK1 x JSR 200 Painted RAL50182 x Elta 6 Amp Electronic single phase speed controller with TK1 x EFSC-3N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 12amps1 x Balance S Diffuser - NO RING - 100mm1 x AIRVENT speed control - AIR4019611 x Round ceiling diffuser 200mm1 x ELTA - Single Phase Transformer 4amps1 x Round ceiling diffuser 300mm1 x EFSC-6N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 10amps2 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A2 x Push Timer Switch - ZA41 x Time Delay Unit - DT20B1 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x CONTROL ECOWATT - Basic1 x EC-Vent control board1 x ACO 149-ACO1/EDV1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x FU 22 25 Frequency Inverter2 x Electronic extractor fan speed controller - FSC 1.51 x Balance S Diffuser - NO RING - 125mm1 x Circular Ceiling Diffuser - TST 1601 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x MWS 1.5 – Transformer Controller With Motor Protection1 x Vent Axia T-Series Controller1 x Systemair Save Connect 2.0 Internet Module1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x EM30-24 Control Panel Commissioning Service1 x Speed Controller - REB51 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Elta Variable Speed Drive IP66 - 4.0KW2 x Remote controller FLEX - for VEKO INT1 x ELTA - Three Phase Transformer 10amps1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x FU 075 04 Frequency Inverter (IP20)1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Elta 3 Amp Electronic single phase speed controller.1 x Transformer 5 Speed Controller - ATC1-12TK1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Elta 6 Amp Electronic single phase speed controller.1 x Round ceiling diffuser 250mm1 x PCA Diffuser - PCA-2502 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Vent Axia ACM 125 inline mixed flow duct fan2 x COM-31 x Isolator Switch - ISOSW1 x MWS 3 – Transformer Controller With Motor Protection1 x TG-K Duct temperature sensor1 x Helios HQW-200/2 - IP551 x Elta ACO Panel 149-ACO14E1 x Envirovent G4 Filter - SL-G4/F71 x EM30-24 Electro-Mechanical Control Panel1 x Isolator Switch - EFF-ISO2 x Envirovent 4 Way Remote Control Switch - SWHBKRF-43 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...