• Model:GasInt-001

Gas Interlock system with Keyswitch

£ 180.54 (excl. VAT)

£ 216.65 (inc. VAT)

The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas valve actuator. Ask for details of other switches/sensors required.

Control panel features
• Airflow off lamp
• Airflow on lamp
• Keyswitch for normal/gas off
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-001 has connections for 2 pressure/current switches. These switches are wired to the panel using the normally open contacts, which close when there is airflow present. The pressure switches are required to have closed contacts (airflow present) for the electrical supply to be available to the gas valve actuator.

When airflow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled. When there is a loss of airflow the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch for supply airflow proving
• Pressure switch for extract airflow proving
• Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-001 has connections to allow the fitting of a remote emergency stop button if required. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

1 x Elta 10 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 2amps1 x Electronic extractor fan speed controller - FSC 1.51 x EC6H - Reversible Group Fan Electronic Controller1 x Elta 2 Amp Electronic single phase speed controller.1 x EFSC-3N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 16amps2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Elta 3 Amp Electronic single phase speed controller.1 x Airvent ceiling fan controller2 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 8amps1 x ELTA - Single Phase Transformer 12amps1 x COM-31 x ELTA - Single Phase Transformer 4amps1 x Flakt Woods ME 1.1 speed controller 1amp - EA9011571 x AIRVENT speed control - AIR4019611 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Elta Variable Speed Drive IP66 - 0.75KW (1ph to 3ph)1 x EFSC-6N- Single Phase Speed Control1 x Elta 6 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 10amps1 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)2 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A3 x Push Timer Switch - ZA41 x Helios ZNE Electronic Fan Overrun Timer1 x Time Delay Unit - DT20B3 x Multi Input Run On Timer - 0 - 20min - CFCU1 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Elta ACO Panel 149-ACO18B1 x Systemair Save Connect 2.0 Internet Module1 x EM30-24 Control Panel Commissioning Service2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Helios TSD 5.5 Transformer Speed Control (400v)1 x FRQ-10A V2 Inverter Speed controller1 x FU 15 40 Frequency Inverter1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x FU 22 25 Frequency Inverter1 x FU 075 52 Frequency Inverter (IP20)1 x Helios VDS-7 Three Phase Transformer 5-Step1 x FRQ5-4A V2 Inverter Speed Controller1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Frequency converter RUCK - FU 075 201 x Elta Variable Speed Drive IP66 - 4.0KW1 x Frequency converter FU 075 14 - IP661 x Elta Variable Speed Drive IP66 - 0.75KW1 x FRQ5-10A Inverter Speed controller1 x FU 15 16 Frequency Inverter1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x Inverter - IDDXF54-2.21 x FU 075 04 Frequency Inverter (IP20)1 x Frequency converter RUCK - FU 075 211 x ELTA - Three Phase Transformer 10amps1 x ELTA - Three Phase Transformer 3amps1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)2 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Vent Axia ACM 150 inline mixed flow duct fan1 x REB-CVF 0-10v Controller1 x Remote controller FLEX - for VEKO INT1 x Transformer 5 Speed Controller - ATC1-4TK1 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer 5 Speed Controller - ATC1-8TK1 x Helios TSW 3 Amp Transformer speed controller1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x TG-K Duct temperature sensor1 x CS2 Current Switch1 x MWS 3 – Transformer Controller With Motor Protection1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp2 x Helios HQW-200/2 - IP551 x Envirovent G4 Filter - SL-G4/F71 x MWS 1.5 – Transformer Controller With Motor Protection1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x WS - Reversing Switch from Helios Fans1 x Vent Axia T-Series Controller1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...