• Model:GasInt-001

Gas Interlock system with Keyswitch

£ 180.54 (excl. VAT)

£ 216.65 (inc. VAT)

The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas valve actuator. Ask for details of other switches/sensors required.

Control panel features
• Airflow off lamp
• Airflow on lamp
• Keyswitch for normal/gas off
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-001 has connections for 2 pressure/current switches. These switches are wired to the panel using the normally open contacts, which close when there is airflow present. The pressure switches are required to have closed contacts (airflow present) for the electrical supply to be available to the gas valve actuator.

When airflow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled. When there is a loss of airflow the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch for supply airflow proving
• Pressure switch for extract airflow proving
• Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-001 has connections to allow the fitting of a remote emergency stop button if required. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

1 x FU 15 40 Frequency Inverter1 x FRQ-10A V2 Inverter Speed controller1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Elta Variable Speed Drive IP66 - 2.2KW1 x FU 15 16 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Frequency converter RUCK - FU 075 201 x Elta Variable Speed Drive IP66 - 4.0KW1 x Frequency converter FU 075 14 - IP661 x Elta Variable Speed Drive IP66 - 0.75KW1 x FU 22 25 Frequency Inverter1 x FRQ5-4A V2 Inverter Speed Controller1 x NKS-D swirl diffuser v-300 x 300mm1 x FU 075 04 Frequency Inverter (IP20)1 x Frequency converter RUCK - FU 075 211 x FU 22 04 Frequency Inverter1 x Frequency converter RUCK - FU 075 381 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x ELTA - Three Phase Transformer 3amps1 x ELTA - Three Phase Transformer 10amps1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Elta 10 Amp Electronic single phase speed controller.1 x FRQ5-10A Inverter Speed controller1 x PCA Diffuser - PCA-3151 x ELTA - Single Phase Transformer 2amps1 x Circular Ceiling Diffuser - TST 1251 x JSR 200 Painted RAL50181 x EC6H - Reversible Group Fan Electronic Controller1 x Curved Blade Grille 600x600 (2way blow)1 x Round ceiling diffuser 400mm1 x Electronic extractor fan speed controller - FSC 1.51 x Circular Ceiling Diffuser - TST 2001 x Balance S Diffuser - NO RING - 125mm1 x Elta 3 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 8amps1 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x Balance S Diffuser - NO RING - 100mm1 x EFSC-3N- Single Phase Speed Control1 x Elta 3 Amp Electronic single phase speed controller with TK1 x Elta 2 Amp Electronic single phase speed controller.1 x Versio Square Ceiling Diffusers - RS141 x Circular Ceiling Diffuser - TST 1601 x COM-31 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x AIRVENT speed control - AIR4019611 x ELTA - Single Phase Transformer 4amps1 x Round ceiling diffuser 300mm1 x ELTA - Single Phase Transformer 12amps1 x Round ceiling diffuser 200mm1 x Airvent ceiling fan controller1 x PCA Diffuser - PCA-2501 x Elta Variable Speed Drive IP66 - 0.75KW (1ph to 3ph)1 x Elta 6 Amp Electronic single phase speed controller.1 x EFSC-6N- Single Phase Speed Control1 x Round ceiling diffuser 350mm1 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x ELTA - Single Phase Transformer 10amps1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO8AC/EC AutoChangeover panel1 x EC-Vent control board1 x Elta ACO Panel 149-ACO14E1 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV1 x CONTROL ECOWATT - Basic1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection2 x Systemair Save Connect 2.0 Internet Module1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC45/501 x Elta Louvre Shutter - 400mm1 x Elta Wall Cowl SWC35/401 x GRA-100 External Grill by S&P1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Jet Cowl - 315mm1 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x VTR 300 STD Filter Kit1 x PIR Sensor - PIR41 x Helios ESA-1 Surface mounted Speed Control 1amp1 x Helios TSW 1.5 Amp Transformer speed controller2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Envirovent 4 Way Remote Control Switch - SWHBKRF-42 x Helios TSW 7.5 Amp Transformer speed controller1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-4TK1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Vent Axia ACM 100 inline mixed flow duct fan2 x Remote controller FLEX - for VEKO INT1 x Helios TSW 3 Amp Transformer speed controller2 x DEF-140T Inlet Guard for the CBT-100N1 x CS2 Current Switch1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Isolator Switch - ISOSW1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Temperature Fan Speed Controller - ATCP4-WMS1 x Transformer 5 Speed Controller - ATC1-12TK1 x Vent Axia ACM 150 inline mixed flow duct fan
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...