• Model:GEOGroundS

GEO Ground Source Heat Exchanger

£ 3,610.06 (excl. VAT)

£ 4,332.07 (inc. VAT)

In the winter, domestic heat recovery units switch to a frost protection mode at low temperatures outside.This usually means that the supply fan slows down, causing an imbalance between the supply and exhaust air through the heat recovery unit. Another possibility is that a (pre-) heater is turned on, which usually consumes 1 to 2 kW of energy. In the summer, at high external temperatures, the supply air from outside can be warmer than the air inside the house. Therefore, this warm supply air can increase the temperature in the house which is undesirable.

The horizontal ground heat exchanger GEO can offer a solution for the problems mentioned above, using a minimum of energy.

GEO has its own control which can be used in combination with any type of heat recovery unit. This control will start the highly energy efficient pump of the GEO at specific set outside temperatures, causing the liquid to flow through the duct. The temperature of the liquid, will approach the temperature of the soil and will transfer its energy to the supply air of the heat recovery system through the battery of the GEO.

By using GEO, the efficiency of the heat recovery can be increased.

Benefits:
• With 8W energy, you can gain up to 1.5 kW.
• Can be used in combination with any heat revocery unit up to 300m³/h.
• Increases the efficiency of the heat recovery unit.
• Has its own control, allowing energy consumption only when needed.
• Has an A label-EC pump and a G4 filter for the protection of the heat exchanger.
• Is easy to install, all in 1 case (pump, control, sensors, filters, filling and venting unit, battery, gauge, vent valve, volume meter, and pressure vessel).
• Has a right / left version in 1 unit and the air to the heat recovery unit can be mounted both on the top and on the side.
• Thanks to relatively thin duct (DN32), it is easy to install.
• Is an hygienic and attractive solution.
• Is easy to clean: condensation develops in the GEO, which is led to the sewer through the condensate drain.
1 x AF VVX-200 - Villavent Filter1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 100mm1 x Jet Fan IV 50-4 IE3 Induction Fan1 x Duct Split Rings (Pair) -630mm1 x Female Ducting Connector - 560mm1 x Rosenberg DKHR 355 2SB.100.6HF.IE1 x BFR 100-160 Coarse 50% Filter1 x EBM Papst- A4E 315-AC08-091 x Duct Mounted Filter Box - G4 Grade Panel - 450mm1 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 250mm Spigot1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x Duct Mounted Filter Box - G4 Grade Panel - 125mm1 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 315mm Spigot1 x CBTR/2-451-4kw1 x AXCBF-EX 800-9/18-4 Bifurcated Atex Axial Fans1 x Duct Termination with Mesh - 560mm1 x Duct Split Rings (Pair) -560mm1 x High Temperature Fan - CRMT/4-355/145-3KW1 x GR40I-ZID.DC.CR (186640/A01) - 230v Single Phase1 x CTHB/6-2501 x Duct Mounted Filter Box - 500mm - M6 grade Bag filter1 x Female Ducting Connector - 150mm1 x Spiral Ducting 3 Meters - 125mm1 x MK 355 - Mounting Feet for Helios AMD Cased Fans1 x MTG FEET & ANTI VIB. MOUNTS (SET OF 4) for MFQ560/4/31 x Mounting Feet (Pair) for SLC-900-060B-09001 x MK 630 MOUNTING FEET (PAIR) for AMD Fans1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 400mm1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x Jetflow Silent SJMF-S 150-1EC1 x Singleflow SSDL500-1EC1 x CBP-18/181 x DA7/7 Feet1 x CHVB/4-3000/315 0,27KW 230V50 VE1 x Helios GigaBox 250mm GBW 250/4 centrifugal1 x KVK Slim 160 - Low profile Semi Acoustic Box Fan1 x FSAF315B2DX Silencer 355/81 x Duct Termination with Mesh - 100mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...