• Model:PAP850

H14 Hepa Portable Air Purifier PAP 850/650

£ 1,985.50 (excl. VAT)

£ 2,382.60 (inc. VAT)

A new range of stand-alone portable air purifiers from S&P, this is the larger high powered version of the PAP 420/320.
It comes in horizontal or vertical configuration. Both are have the same specifications but sizes are slightly different. The basic model consists of an F7 pre-filter then a medical/hospital grade H14 Hepa filter.
All powered by a high efficiency EC fan motor.
Optional extras include a carbon filter to destroy odours or a VOC filter to destroy formaldehyde, ethylene and other volatile organic compounds that can pollute indoors air and is proven to be unhealthy.
The H14 filter, manufactured in a clean room, comes with its own certificate and is efficient against dust, pollen, spores, bacteria and viruses.
These are medical grade commercial air purifier units suitable for hospitals, vets, laboratories, offices, shops etc.
Replacement filters are also available, please ask for details.

Basic Version: PAP 850 H14
Dust and H14 Hepa filter.
Airflow 850-600 m3/hr depending on filter state, suitable for floor areas of approx 80-60 square meters. (@3m room height)

Carbon filter Version: PAP 650 CA H14
Dust and H14 Hepa filter and carbon filter to also filter odours.
Airflow 650-430 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

VOC filter Version: PAP 650 VOC H14
Dust and H14 Hepa filter and VOC filter.
Airflow 650-450 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

Dimensions: (horizontal option) 550mm Wide x 735mm Depth x 605mm Height
Dimensions: (vertical option) 550mm Wide x 520mm Depth x 820mm Height
Power: 180 Watts.

PDF Files


Airpur Range of Purifiers


Operating Instructions

Available Options

1 x KBA- Inlet Mounting 3551 x Inclined Kurb support for CTHB/6-4001 x Purlin Box 350 for RAW Cowls1 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x Inclined Curb support BI-3 for TH-5001 x Purlin Box 630/710 for RAW Cowls1 x JBS-1250 Flat Roof Upstand for HCTT/4-1000/B1 x Ancillary Pack for SLC-6302 x SAVE VSR 300 heat recovery unit1 x Airbrick Grille with flange - 204 x 60mm1 x 204x60mm Flat Channel Connector1 x Flanged Spigot - 250mm1 x 100mm Round Equal T Piece1 x Spiral end cap - 80mm1 x Slimline 150 High Efficiency, Low Profile Heat Recovery Unit1 x Vent Axia INTEGRA PLUS EC1 x M5/G4 filter complete filter kit for IDEO HR.1 x Soler & Palau - Contra Rotating TCBTx2-630 - IP651 x Cased Axial Fan Extension - 400mm dia1 x ZAC- 630 -4-31 x KBD- outlet mounting flange for CRMT 2501 x Vent Axia KAF Kitchen Extract Fan - 630mm - 2 Pole - Single Phase1 x KBD-250 outlet mounting flange for CRMT 2501 x KBD- outlet mounting flange for CRMT 3551 x USD-4000 Rect to Circ coupling Flange For KABB/T kitchen fans1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x KBD- outlet mounting flange for CRMT 2801 x LAL 710 D4 Mounting Flange1 x KBD- outlet mounting flange for CRMT 3151 x Purlin Box 800 for RAW Cowls1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x Purlin Box 300/315 for RAW Cowls1 x Ancillary Pack for SLC-4001 x Elta SLC500/4A-3AC - IP551 x Purlin Box 400/450 for RAW Cowls1 x 125mm Insulated 45 Degree Bend1 x Purlin Box 500/560 for RAW Cowls1 x Flanged Spigot - 200mm1 x Male Ducting Connector - 250mm1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Female Ducting Connector - 200mm1 x Flanged Spigot - 150mm1 x Spiral end cap - 100mm1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 500mm1 x Anti Vibration Duct Suspension Rings - 80mm1 x 110 x 54mm Flat Channel Clip (Pack Of 5)1 x Spare filter for Energi Sava 380 HR unit1 x SAVE VTR 500 L Heat Recovery Unit1 x SAVE VTC 700 R Heat Recovery Unit1 x Spare filter Set for Energi Sava 300 & 400 HR unit1 x Spare filter pack for Energi Sava 210 HR unit1 x AL 500 D2 01 AXIALINE - High Performance Long Cased Axial Fan1 x HCBT-4/500-H - Three Phase 400v Only - 56033228001 x 100mm Round Condensation Trap1 x Heat Resistant In-line Axial Fan - VOK 135/120 H1 x Fresh Air control carbon filter - 125mm1 x Metal Inline Fan - VENT-125NK1 x Jetflow-HIT Metal inline - 125mm1 x Etaline 250mm1 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...