• Model:PAP850

H14 Hepa Portable Air Purifier PAP 850/650

£ 1,985.50 (excl. VAT)

£ 2,382.60 (inc. VAT)

A new range of stand-alone portable air purifiers from S&P, this is the larger high powered version of the PAP 420/320.
It comes in horizontal or vertical configuration. Both are have the same specifications but sizes are slightly different. The basic model consists of an F7 pre-filter then a medical/hospital grade H14 Hepa filter.
All powered by a high efficiency EC fan motor.
Optional extras include a carbon filter to destroy odours or a VOC filter to destroy formaldehyde, ethylene and other volatile organic compounds that can pollute indoors air and is proven to be unhealthy.
The H14 filter, manufactured in a clean room, comes with its own certificate and is efficient against dust, pollen, spores, bacteria and viruses.
These are medical grade commercial air purifier units suitable for hospitals, vets, laboratories, offices, shops etc.
Replacement filters are also available, please ask for details.

Basic Version: PAP 850 H14
Dust and H14 Hepa filter.
Airflow 850-600 m3/hr depending on filter state, suitable for floor areas of approx 80-60 square meters. (@3m room height)

Carbon filter Version: PAP 650 CA H14
Dust and H14 Hepa filter and carbon filter to also filter odours.
Airflow 650-430 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

VOC filter Version: PAP 650 VOC H14
Dust and H14 Hepa filter and VOC filter.
Airflow 650-450 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

Dimensions: (horizontal option) 550mm Wide x 735mm Depth x 605mm Height
Dimensions: (vertical option) 550mm Wide x 520mm Depth x 820mm Height
Power: 180 Watts.

PDF Files


Airpur Range of Purifiers


Operating Instructions

Available Options

1 x Curved boot - 900mm1 x DKEX 315-4 Centrifugal High Performance ATEX Fan1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -4pole1 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x 220x90mm Elbow Bend with 125mm Fixed Spigot1 x HRB/3-200-BMPN1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -2pole1 x FlameProof Plate Axial Fan - Single Phase - 7.5 inches - Eexd IIC T4 -2pole1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x GB-WSD 560 Weather Protection hood for the Giga-Box Fans - 560mm1 x Bellimo TF24S Actuator 24V1 x Soler & Palau TCBT/6-400/H - IP441 x GB-WSD 500 Weather Protection hood for the Giga-Box Fans - 500mm1 x FU 075 52 Frequency Inverter (IP20)1 x Impeller Side Guard - 315mm1 x Impeller Side Guard - 400mm1 x Impeller Side Guard - 450mm1 x Ziehl GR40I-ZID.DC.CR plug fan1 x Rosenberg RS-315M.3EF Centrifugal Inline Fan1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x ERR 31/1 Centrifugal inline fan1 x Elta Variable Speed Drive IP66 - 2.2KW1 x TD6000 Mixvent - 400mm1 x Soler & Palau TCBB/6-400/H - IP441 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Curved boot - 300mm1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Inline Axial Fan - VOK-C 3151 x 110 x 54mm Rectangular Wall Plate1 x DEF-140T Inlet Guard for the CBT-100N1 x QP315C Acoustic Fan - 315mm1 x PRIO-160 160mm Inline Mixvent Fan1 x Multiflow SMB650/4-1AC1 x Metal Inline Fan - VENT-400K - T (3 Phase)1 x Rosenberg EQ 300-2 plate axial fan1 x Impeller Side Guard - 630mm1 x EBB-250 HM DESIGN Centrifugal Extractor Fan1 x EBB-250 T DESIGN Centrifugal Extractor Fan1 x ELTA - Three Phase Transformer 3amps1 x FU 15 40 Frequency Inverter1 x Quietflow SQS315-1ECL - Centrifugal Box Fan1 x Anti Vibration Duct Suspension Rings - 300mm
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Unbelievable! With TDmixvent500: noise reduction minimum 50%...