• Model:HAP

H14 True Hepa Commercial Air Purifier

£ 1,584.70 (excl. VAT)

£ 1,901.64 (inc. VAT)

H14 Hepa Commercial Air Purifier / Air Cleaner incorporating 3 stage filtration for cleaning the air in indoor environments. Made in the UK.
These are commercial units with easily sourced replacement filters, manufactured by a specialist local company. They also have the ability to integrate (with optional extras) with existing air-con systems if needed. (see images)
It consists of a coarse pre-filter + a medical grade H14 Hepa filter + Activated Carbon filter.
Suitable for Shops, Offices, Pubs, Restaurants, Waiting Rooms, Surgeries, Dentists, Gyms and Homes.

True Hepa air purifiers capture up to 99.97% of particles as small as 0.3 microns, whereas a purifier with a normal Hepa Type filter is only capable of capturing 99 percent of particles that are 2 microns or larger. Not all Hepa filters are equal!
Hepa H14 filters are the highest grade and pass only 0.005% of 0.1 micron particles per litre of air and are therefore considered medical grade.

The Airclean Commercial Hepa Air Purifier, and the Airclean Fan + Filter Systems offers a simple, retrofittable solution.

• Removes Fine particulates including viruses down to 0.1 microns with a leak tested True H14 Hepa Filter to EN 1822
• Removes Coarse Particulates using a 65% Coarse Panel Air Filter to ISO 16890
• Removes Odours, VOCs and pollutant gases with a deep bed activated carbon filter
• Powerful fans operate up to 500m3/hr (HAP500) and 700m3/hr (HAP675).
• The air purifier / air cleaner can be ducted for use in medical isolation rooms
• The Air Purifier can also be ducted and combined with fan coil vent systems in offices to improve filtration
• All Filters, and the Air Purifier are Manufactured in Kent, UK by a company with over 30 years experience in the industry.

The H14 Commercial Hepa Air Purifier / Air Cleaner will clean air in indoor environments by the removal of ultra-fine particulates, odours, VOCs and Pollutant gases. The H14 Hepa Filter used in the Air Purifier is a True and individually Tested H14 Hepa offering filtration down to 0.1 micron particulates.
The deep bed Activated Carbon Filter offers a long contact time maximising its capability and life for the removal of odours, VOCs, and pollutant gases including Nitrogen Dioxide.

Applications
The Airclean Hepa Air Purifier is designed to clean air in indoor environments by the removal of fine particulates, odours, VOCs and Pollutant gases such as Nitrogen Dioxide, by drawing it through the highest efficiency air filters.

1. Air Purifier / Cleaner
The Commercial Hepa Air Purifier will improve air quality, and reduce infection transmission in any scenario, independent of existing heating and cooling systems, by recirculating and cleaning the air.
2. Negative Pressure Infection Control
By adding a duct outlet to the top of the Hepa Air Purifier, the unit can be set up to discharge through a wall, or window creating a negative pressure. This function can be used in hospitals or care homes to prevent infection spread, whilst ensuring the discharged air is safe.
3. Fan Coil Ventilation Systems
The Hepa Air Purifier can be mounted in a room and ducted to supply fresh clean air to the back of existing fan coil air conditioning. The fan in the Air Purifier allows the system to be balanced, allowing existing fan coil fans, to handle the strain.

Technical
The Hepa Air Purifier includes a 2-speed switch giving users access to a trickle and boost setting. The two speeds are pre-set when supplied, and can be fully adjusted by two discreet dials located in the base of the unit, to allow for fine control as required. The unit is constructed from a combination of plastic-coated steel, and powder coated steel, which is hygienic and cleanable as required.
The commercial Hepa Air Purifiers come as standard with white label branding. The unit does offer available space for corporate branding if needed, or an awareness campaign as required.

Power: 80 Watts, Single Phase, 240V, 1 amp (HAP500) / 160 Watts, Single Phase, 240V, 2 amp (HAP675)
Noise: 40 to 60 dBA ( 5-100% Speed Setting (HAP500) )
Duty: 500m3/hr (HAP500), 675m3/hr (HAP675)
Dimensions: 425W x 425H x 1000Hmm (HAP500) - 450W x 700H x 1000Hmm (HAP675)
Room Area: HAP500 is effective up to 500m3/h for indoor spaces (2.5m high) of up to 75m2. (@3 room exchanges/hr)
HAP675 is effective up to 675m3/h for indoor spaces (2.5m high) of up to 100m2. (@3 room exchanges/hr)

Coarse 65% Pleated Panel Filters (Anticipated Change Rate – 6 Months Maximum)
The first filter in the Hepa Air Purifier is designed to remove large particulates including PM10 and PM2.5 and acts to pre filter air prior to entering the unit. This filter meets ISO16890 to Coarse 65%

Activated Carbon Filter – (Anticipated Change Rate – 1 Year Maximum)
The Activated Carbon Filter contains Virgin Activated Carbon attaining a contact time long enough to remove odours, VOCs, and pollutant gases. This filter has one of the deepest carbon beds available in an air purifier, guaranteeing maximum removal efficiency and life.

H14 Hepa Filter - (Anticipated Change Rate – 1 Year Maximum)
The Airclean Commercial Hepa Filter is individually DOP Scan Tested to meet EN1822. Filters are highly efficient remove particulates down to 0.1 micron and tested to be 99.997% efficient at 0.3 microns. Our unique mounting system ensures that air will not bypass the Hepa.

Available Options

1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x Ancillary Pack for SB-Biflow 400 model1 x CBMT/Q 315-54 1 HEATER KIT1 x Blast Gate (Manual) 100mm1 x Soler & Palau - HCBT/4-450/H - IP651 x ILHT-560/MV - Inlet & Outlet Mounting Flange Kit1 x Impeller Side Guard - 250mm1 x DEF-800AN1 x Airbrick Grille with flange - 204 x 60mm1 x 125mm Round Connector1 x CBM 9/9 4 Pole 550watt C VR-( Three Phase) CLEARANCE ITEM1 x EuroSeries (ESP) - Plate Mounted Axial Fans 315-121 x AKOR Spare Filter1 x Helios GigaBox 450mm GBD 450/4/4 centrifugal1 x Purlin Box 300/315 for RAW Cowls1 x SD-MUB Vibration pad set1 x 100mm Wall Duct - 350mm1 x Belt Drive Cased Axial Fan - 710mm - H version1 x Etaline 315mm - E2 03 (Low Power Version)1 x Onda Cristal 900 Kitchen Extractor Hood1 x 125mm - 100mm Round Reducer1 x MFA-AR/AXC 315 mounting foot1 x JAE- 630 Flexible Coupling for CRHB/CRHT Roof Fans1 x Etaline 150mm - EL 150L E2 011 x Soler & Palau TCBT/6-710/H - IP651 x 2mtr Round Ducting - 100mm1 x Soler & Palau - HCBT/6-355/H - IP651 x CC-710-2.2kw1 x Purlin Box 400/450 for RAW Cowls1 x AKOR GD - Spare Motor1 x Access Door for Circular Duct - 400 x 300 - SIZE 501 x Helios DDF-315 Roof Cowl1 x Elta Wall Cowl SWC45/501 x Belt Drive Cased Axial Fan - 630mm - L version1 x Soler & Palau TCBB/4-630/L - IP651 x Duct Mounted Filter Box - G4 Grade Panel - 450mm1 x Prio 150E2 circular duct fan1 x Bifurcated Fan - TET 4/6001 x Soler & Palau TCBB/4-560/L - IP651 x FSAF1000C1DA SILENCER 1070/161 x 204x60mm Flat Channel Connector
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Unbelievable! With TDmixvent500: noise reduction minimum 50%...