• Model:HAP

H14 True Hepa Commercial Air Purifier

£ 1,584.70 (excl. VAT)

£ 1,901.64 (inc. VAT)

H14 Hepa Commercial Air Purifier / Air Cleaner incorporating 3 stage filtration for cleaning the air in indoor environments. Made in the UK.
These are commercial units with easily sourced replacement filters, manufactured by a specialist local company. They also have the ability to integrate (with optional extras) with existing air-con systems if needed. (see images)
It consists of a coarse pre-filter + a medical grade H14 Hepa filter + Activated Carbon filter.
Suitable for Shops, Offices, Pubs, Restaurants, Waiting Rooms, Surgeries, Dentists, Gyms and Homes.

True Hepa air purifiers capture up to 99.97% of particles as small as 0.3 microns, whereas a purifier with a normal Hepa Type filter is only capable of capturing 99 percent of particles that are 2 microns or larger. Not all Hepa filters are equal!
Hepa H14 filters are the highest grade and pass only 0.005% of 0.1 micron particles per litre of air and are therefore considered medical grade.

The Airclean Commercial Hepa Air Purifier, and the Airclean Fan + Filter Systems offers a simple, retrofittable solution.

• Removes Fine particulates including viruses down to 0.1 microns with a leak tested True H14 Hepa Filter to EN 1822
• Removes Coarse Particulates using a 65% Coarse Panel Air Filter to ISO 16890
• Removes Odours, VOCs and pollutant gases with a deep bed activated carbon filter
• Powerful fans operate up to 500m3/hr (HAP500) and 700m3/hr (HAP675).
• The air purifier / air cleaner can be ducted for use in medical isolation rooms
• The Air Purifier can also be ducted and combined with fan coil vent systems in offices to improve filtration
• All Filters, and the Air Purifier are Manufactured in Kent, UK by a company with over 30 years experience in the industry.

The H14 Commercial Hepa Air Purifier / Air Cleaner will clean air in indoor environments by the removal of ultra-fine particulates, odours, VOCs and Pollutant gases. The H14 Hepa Filter used in the Air Purifier is a True and individually Tested H14 Hepa offering filtration down to 0.1 micron particulates.
The deep bed Activated Carbon Filter offers a long contact time maximising its capability and life for the removal of odours, VOCs, and pollutant gases including Nitrogen Dioxide.

Applications
The Airclean Hepa Air Purifier is designed to clean air in indoor environments by the removal of fine particulates, odours, VOCs and Pollutant gases such as Nitrogen Dioxide, by drawing it through the highest efficiency air filters.

1. Air Purifier / Cleaner
The Commercial Hepa Air Purifier will improve air quality, and reduce infection transmission in any scenario, independent of existing heating and cooling systems, by recirculating and cleaning the air.
2. Negative Pressure Infection Control
By adding a duct outlet to the top of the Hepa Air Purifier, the unit can be set up to discharge through a wall, or window creating a negative pressure. This function can be used in hospitals or care homes to prevent infection spread, whilst ensuring the discharged air is safe.
3. Fan Coil Ventilation Systems
The Hepa Air Purifier can be mounted in a room and ducted to supply fresh clean air to the back of existing fan coil air conditioning. The fan in the Air Purifier allows the system to be balanced, allowing existing fan coil fans, to handle the strain.

Technical
The Hepa Air Purifier includes a 2-speed switch giving users access to a trickle and boost setting. The two speeds are pre-set when supplied, and can be fully adjusted by two discreet dials located in the base of the unit, to allow for fine control as required. The unit is constructed from a combination of plastic-coated steel, and powder coated steel, which is hygienic and cleanable as required.
The commercial Hepa Air Purifiers come as standard with white label branding. The unit does offer available space for corporate branding if needed, or an awareness campaign as required.

Power: 80 Watts, Single Phase, 240V, 1 amp (HAP500) / 160 Watts, Single Phase, 240V, 2 amp (HAP675)
Noise: 40 to 60 dBA ( 5-100% Speed Setting (HAP500) )
Duty: 500m3/hr (HAP500), 675m3/hr (HAP675)
Dimensions: 425W x 425H x 1000Hmm (HAP500) - 450W x 700H x 1000Hmm (HAP675)
Room Area: HAP500 is effective up to 500m3/h for indoor spaces (2.5m high) of up to 75m2. (@3 room exchanges/hr)
HAP675 is effective up to 675m3/h for indoor spaces (2.5m high) of up to 100m2. (@3 room exchanges/hr)

Coarse 65% Pleated Panel Filters (Anticipated Change Rate – 6 Months Maximum)
The first filter in the Hepa Air Purifier is designed to remove large particulates including PM10 and PM2.5 and acts to pre filter air prior to entering the unit. This filter meets ISO16890 to Coarse 65%

Activated Carbon Filter – (Anticipated Change Rate – 1 Year Maximum)
The Activated Carbon Filter contains Virgin Activated Carbon attaining a contact time long enough to remove odours, VOCs, and pollutant gases. This filter has one of the deepest carbon beds available in an air purifier, guaranteeing maximum removal efficiency and life.

H14 Hepa Filter - (Anticipated Change Rate – 1 Year Maximum)
The Airclean Commercial Hepa Filter is individually DOP Scan Tested to meet EN1822. Filters are highly efficient remove particulates down to 0.1 micron and tested to be 99.997% efficient at 0.3 microns. Our unique mounting system ensures that air will not bypass the Hepa.

Available Options

1 x Acopel F400-120/1601 x ISA-ILHT-500/560/630 - Anti-vibration mounts1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x Spigot plate - 630mm1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 400mm1 x MFA-AR/AXC 315 mounting foot1 x EC-Basic-T temperature1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT500/4-3AC1 x Purlin Box 400/450 for RAW Cowls1 x 100mm Round Connector1 x MPS Weather Housing1 x Elta Wall Cowl SWC25/311 x Mounting Feet (Pair) for SLC-450-060B-04501 x Ancillary Pack for SB-CYL 630 model1 x Manrose Auto Shutter - XF150AP1 x Impeller Side Guard - 1000mm1 x Hydor HPA450/4-1A1 x Electronic extractor fan speed controller - FSC 1.51 x RSK355 - Back Draught Shutter1 x GENIOX 11 Internal Mounted Unit1 x Ancillary Pack for SLC-4501 x CBMT/Q 250-54 1 HEATER KIT1 x RSK400 - Back Draught Shutter1 x Ancillary Pack for SLC-6301 x Ducting 45 Degree Bend - 630mm1 x Acopel F400-630/1602 x Impeller Side Guard - 500mm1 x Manual Overide Switch - MOS1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Female Ducting Connector - 160mm1 x Acopel F400-280/1601 x Etamaster EM 400 EC 01 inline mix-vent fan1 x 125mm Round Connector with Damper1 x Singleflow SSDL500-1EC1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x ELTA - Single Phase Transformer 4amps1 x AES-Fire control unit2 x Acopel F400-200/1601 x GB-WSD 250 Weather Protection hood for the Giga-Box Fans - 250mm1 x AL 355 EC 01 AXIALINE - High Performance Long Cased Axial Fan2 x Manrose Humidistat - 13611 x Purlin Box 1000 for RAW Cowls1 x CBS-60 Outlet Flange for CSB/CBT-601 x Elta Wall Cowl SWC45/501 x Ancillary Pack for SLC-5001 x 125mm Round Connector1 x Compact SCD450/4-3AC1 x Impeller Side Guard - 560mm1 x 125mm Round 90 Degree Bend1 x Mounting Feet (Pair) for SLC-400-060-04001 x CBMT/Q 250-30 1 HEATER KIT1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 6 Pole 200watt VR RE1 x Remote Fan Status Indicator - RF11 x CBMT/Q 150-27 1 HEATER KIT1 x Elta Standard Ambient Flexible Connector - 560mm1 x FSAF1000B1DB Silencer 1043/241 x Purlin Box 800 for RAW Cowls1 x Ancillary Pack for SB-Biflow 400 model1 x Ancillary Pack for SB-Biflow 315 model1 x AW 420 D4-2-EX Explosion Proof Axial Fan - ATEX1 x Acopel F400-250/1601 x Air Quality Sensor - AQS1 x Access Door for Circular Duct - 250 x 150 - SIZE 251 x DOL Starter with Isolator - Three phase1 x DA10/10 Feet1 x SD-MUB Vibration pad set1 x Ductwrap Insulation DW501 x Circ.connection-125 fo EX-140 ATEX unit1 x BDS 800 RA b/d shutter1 x Inclined Kurb support for CTVB/T Fans - BI-51 x FSD-TD 200mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Mounting Feet (Pair) for SLC-800-060B-08001 x Bell Mouth Inlet for Elta cased fans - 800mm1 x Female Ducting Connector - 125mm1 x MTS10- extractor fan 3 step switch1 x CBMT/Q 315-54 1 HEATER KIT1 x CBMT/Q 100-06 1 HEATER KIT1 x DS-2 2-Speed Switch (3 Phase)1 x Duct Fast Clamps - 355mm1 x Elta SPA450/46-3AC - IP541 x 110 x 54mm Vertical 90 Degree Bend2 x Plastic Kitchen Extractors - CK-60F2 x Metal Inline Fan - VENT-355N1 x Ducting T Piece Equal - 125mm1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT400/4-3AC1 x Etaline 630mm - D4 01 3 Phase1 x Etaline Max-Fan - 315mm - E2 011 x Helios HQW-250/4 - IP551 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x Elta Unpodded Silencer 1D-800mm1 x Belt Drive Cased Axial Fan - 630mm - H version1 x Run On Timer - 5s - 4hrs - RT5A1 x Access Door 450mm x 450mm1 x Differential Pressure Switch - 100 - 1000 Pa - IP651 x Duct Termination with Mesh - 315mm1 x Access Door 400mm x 400mm1 x Elta Standard Ambient Flexible Connector - 1000mm1 x Etaline 400mm2 x PRIO-160 EC 160mm Inline Mixvent Fan2 x KD 250 L1 Circular duct fan1 x Ducting 90 Degree Bend - 200mm2 x Ducting 45 Degree Bend - 315mm3 x Flanged Spigot - 400mm2 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan2 x Classic SAX23/9ARB Wall Mounted1 x Ancillary Pack for SB-CYL 500 model1 x Spiral Ducting 1 meter - 500mm1 x Spiral Ducting 3 Meters - 400mm1 x Synthetic Air Filter Media - 6mm x 2mtr x 10mtr Half Roll1 x Acopel F400-315/1601 x Spigot plate - 315mm1 x CBM 9-9 550w 4P CM 3-Phase1 x SWF-100X Sidewall Mounted Extractor Fan1 x EKHR 280-2SW BCMI1 x TTT/4-800/L N 2,2KW (230/400V50HZ)EXEIIT3 VE Atex Unit1 x EC6H - Reversible Group Fan Electronic Controller1 x Helios HQW-630/6 - IP551 x Soler & Palau - HXBR/6-630/H - IP541 x BDS 300/315 RA b/d shutter1 x Elta SPA350/4-1AC - IP441 x 150mm Round 45 Degree Bend1 x EBB-175 S DESIGN Centrifugal Extractor Fan1 x Chaysol DA 9/9 3 speed1 x Elta SCP500-1EC - IP551 x Silent 100 Window Kit - windowS1 x SDD-U Anti Vibration Pads1 x Female Ducting Connector - 150mm1 x Elta SLC355/4-3AC - IP551 x Ducting 90 Degree Bend - 250mm1 x FSD-TD 316 Grade Stainless Steel Fire and Smoke Damper, 700mm x 700mm, EASY FIX AF, GALV Case, GALV Blades, PM230v1 x Duct Termination with Mesh - 250mm1 x 110 x 54mm Low Profile Plastic Ducting - 2 Meter1 x CBM 9/9 4 Pole 550watt C VR-( Three Phase) CLEARANCE ITEM1 x CAB-400 ECOWATT Energy Efficient Acoustic Box Fan1 x AL 355 Mounting Feet (Pair)1 x Elta SCP500/4-1AC - IP551 x Metal Inline Fan - VENT-100NK1 x Duct Mounted Filter Box - G4 Grade Panel - 150mm1 x Classic SAX30/12ARB Wall Mounted1 x LV100-PS 12v Pullcord Operated Bathroom Fan1 x CTI CVA-N 500/560 Outdoor cover for CVAB/T Fans1 x Spiral Ducting 1 meter - 560mm1 x Airbrick Grille with flange - 204 x 60mm1 x Nordik International Plus 90/36 - Ceiling Sweep Fan Range1 x Lo-Carbon Silhouette 100 B1 x Quietflow SQS500-3ECL - Centrifugal Box Fan
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...