• Model:SB200-C

Helios SB-200-C SilentBox Acoustic Inline Fan

£ 530.45 (excl. VAT)

£ 636.54 (inc. VAT)

Duty: Up to 810m3/hr

■ Installation:
Installation in any position without restriction – horizontally, vertically or pitched – suitable for intake or extract (Exception: SVS must not be installed with the swing-out motor impeller unit facing upward).

■ Motor
Totally enclosed external rotor motor with ball bearings, impregnated windings insulation class F, designed for continuous operation, maintenance free and interference-free.

■ Casing
Like an internal attenuator. Acoustically lined with abrasive resistant 50 mm thick mineral fibreboard. Four quick release clamps permit easy access to motor scroll and impeller set.
Swing out motor and impeller.
Spigots on intake and exhaust twin-seal rubber gaskets fit standard ducts. All parts manufactured from galvanised sheetsteel.

■ Impeller
With backward curved highquality polymer blades. Inflow via inlet cone.

■ Electrical connection
Terminal box (IP 54) is supplied with a 60 cm long electric cable.

■ Motor protection
With thermal contacts wired in series with the windings. To reset the thermal contacts the main supply must be switched off and on.

■ Speed control
Stepless 0 – 100 % using electronic controller or 5 step transformer controller (see table).

■ Protection class
IP 44

■ Casing
Extremely flat casing in longer design with more than 50 mm thick sound-absorbing mineral wool lining and glass fibre surface. The acoustic box which is placed in front of the fan reduces the sound level for the intake significantly. The sound pressure level is reduced to a smaller extent (see sound levels in the tables above the performance curves).

■ The swing out motor and impeller unit permits maintenance and cleaning without disassembly of system components. The swing-out range must be considered for the inspection flap.

■ Impeller
Energy-saving centrifugal impeller with backward curved blades from high quality polymer. Dynamically balanced for low noise operation.

■ Electrical connection
Terminal box (IP 54) mounted on running cable.

■ Motor protection
With thermal contacts wired in series with the windings which automatically reset after cooling.

■ Speed control
Stepless 0 – 100 % by use of electronic controller or 5 step transformer controller (see table).

■ Protection class
When installed in ducting the fan is rated IP 44.

PDF Files


SB-200-C Data Sheet

1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x DEF-CBM-RE-7 - Protection Guard1 x Multi Input Run On Timer - 0 - 20min - CFCU5 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan2 x Multiflow SMB550/4-1AC1 x Speed Controller - REB52 x Speed Controller - REB81 x ELM 18 EX Flexible Cuff for ERM 186 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Mini Diffuser - 100mm1 x Speed Controller - REB2.5-N1 x Elta - Room Sensor - Temp/Humid/C021 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR5 x Duct Termination with Mesh - 150mm2 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR6 x HIMF - Mixed Flow Fan 125mm Inline Fan9 x Duct Termination with Mesh - 250mm4 x DPD 12PM Delivery Surcharge1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit7 x Universal Pipe Fixing Clip6 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan7 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR8 x CBS-100 Outlet Flange for CBT-1007 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan7 x DDMP 12-09 1F 1800W M6A4 DA813 x ELTA - Single Phase Transformer 2amps8 x 220x90mm x 1m Insulated Rectangular Duct10 x DDMP 12-12 1F 1800W M6A4 DA87 x Chaysol DA 9/9 3 speed3 x CBA-100 Inlet Flange for CBT-10012 x ACOAS/ AC/EC Auto Changeover 8Amp18 x 125mm Round Connector with Damper1 x DDMP 12-12 3F 5700W M6M0 DG74 x DDMP 10-10 1F 1000W M6A2 DA51 x KBA- Inlet Mounting 2253 x Flanged Damper 019-0500-STD3 x Run On Timer - 5s - 4hrs - RT5A7 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan4 x DDMP 12-09 FLANGE2 x Singleflow SSDL315-1EC13 x DDMP 10-08 1F 1000W M6A2 DA55 x Atex Inline Fan 180mm - ERM18EXE14 x ELTA - Three Phase Transformer 3amps1 x 100mm Round Connector with Damper7 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)2 x Duct Termination with Mesh - 500mm14 x CBM 7/7 147w 4P RE-VR6 x Helios ZNE Electronic Fan Overrun Timer10 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Elta SCP400/4-1AC - IP556 x CBM 9/7 4p 420W RE-VR6 x Spiral end cap - 80mm9 x DDMP 10-08 FLANGE4 x BDS 350 RA b/d shutter5 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan2 x Elta SLC500/4B-1AC - IP552 x TUNE-R-200-3-M3 - Control Damper1 x Elta SLC560/4C-3AC - IP551 x KAD-225-F400 Rectangle Flexible Connector2 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)4 x HXP450/6-1 - 6 Pole - Single Phase2 x Vent Axia T-Series Wall Model TX9WL4 x Duct Termination with Mesh - 200mm2 x Elta Turboflow-TF - 450mm - Single phase10 x Potentiometer EGH 01 - for DDMP Fans3 x Spiral Ducting 1 meter - 200mm4 x Silentub - STUB 2001 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x MTP 10, 10K, Speed control8 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x ELTA - Single Phase Transformer 8amps1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR5 x Duct Termination with Mesh - 315mm5 x 110 x 54mm Short Rectangular to Round Adaptor male3 x CFI Lite 600 Carbon Filter3 x Chaysol da 9-7 - 3 Speed1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 100mm1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT1 x TecFire Intumescent Damper - Rectangular 400x400mm4 x Spiral Ducting 1 meter - 355mm4 x VA 9/2 T - High Temp Axial Fan,3 x GRA-100 External Grill by S&P4 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)4 x CAD-COMPACT 500 ADVANCED N8 - MVHR unit6 x CBA-130 Inlet Flange for CBT-1301 x Elta SCP350/4-1AC - IP556 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x REB-CVF 0-10v Controller1 x FU 22 25 Frequency Inverter1 x Twinflow STDL315-1EC5 x CBT-130N Centrifugal1 x CBP-9/7-RC1 x CS2 Current Switch1 x CBM 9-9 550w 4P VR (Open Motor)1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x ACO8AC/EC AutoChangeover panel1 x 7 Day Programmable TIMECLOCK5 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x DDMP 12-12 3F 1810W M6A4 DG02 x Duct Termination with Mesh - 355mm1 x Elta Variable Speed Drive IP66 - 1.5KW5 x 220x90mm Insulated Rectangular T-Piece2 x DDMP 10-10 FLANGE2 x Vent Axia W300310 Controller Electronic 1.5A1 x AXC 355-6/19°-2(B)-P (0.75 kW) - Smoke Extract Fan1 x DDMP 12-12 FLANGE1 x Silent 300 CRZ Design PLUS Extractor Fan2 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost5 x Rectangular Airbrick Adaptor2 x Elta SCP500/4-1AC - IP552 x Ancillary Pack for SB-Biflow 250 model1 x Airvent ceiling fan controller3 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x Impeller Side Guard - 450mm1 x REU 3amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost3 x RTRD - Three Phase Speed Controller - 14 Amp1 x MWS-75 Transformer controller with TK -7.5A1 x Transformer speed controller - ATC1 - 1.5 Amps4 x Transformer Speed Control - RTRE- 5.0Amp5 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x REB Ecowatt Speed Control - REB-ECO1 x Helios VARW 450/4 - TK1 x MWS 5 – Transformer Controller With Motor Protection Unit7 x Helios HQW-200/2 - IP551 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)4 x EC Trickle and boost module - IP563 x Transformer Speed Control - RTRE- 3.0Amp4 x RUCK MTP 20, 10K, Speed control1 x CBB-60N Centrifugal3 x Transformer (silent) speed controller - RE 5.0 Amp1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x Elta SCP315/4-1AC - IP552 x 204x60mm Insulated Rectangular Horizontal 90° Bend2 x ACO3TO-ADS-VFC-7.1A1 x Direct Delivery Surcharge1 x 204x60mm x 1m Insulated Rectangular Duct1 x Elta Quietflow Twin SQT150-1ECL1 x SDD-U Anti Vibration Pads1 x RDH Flange - 02501 x CBM 7/9 4p 300W RE-VR1 x 110 x 54mm Horizontal 90 Degree Bend1 x Kitchavent 2000 Odour control System - 18152521 x Elta SCP450/4-1AC - IP551 x TDP-D Pressure Sensor with Display2 x RDS 1 Helios Transformer Controller With Motor Protection1 x 220x90mm Insulated Rectangular Vertical 90° Bend2 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Ancillary Pack for SB-Biflow 315 model1 x Soaker Sheet to suit RA8001 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x Silent 300 CZ Design PLUS Extractor Fan
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...