150/160mm Diameter
A wide range of Inline Extractor Fans suitable for all types of extraction requirements within the home or leisure space,
Inline fans can be installed in the roof or loft space above the room with ducting running from a discreet grille to the fan's extract spigot and then from the exhaust spigot of the fan to the external grille of roof outlet.
Due to the compact Design these fans can also be situated within ceiling voids or wall cavities if space is restricted,
Due to the compact Design these fans can also be situated within ceiling voids or wall cavities if space is restricted,
Displaying 1 to 18 (of 18 products)
AXC TP - 150mm Plastic Centrifugal Inline Fan
£ 73.50
AXC TP - 150 Plastic inline unit,
Silent and Powerful backward curved centrifugal motor with thermal cut out.
Please select size below
PLEASE NOTE THIS ALSO "NOW" COMES WITH THE MOUNTING BRACKET....
AXC TP - 160mm Plastic Centrifugal Inline Fan
£ 78.75
AXC TP - 160 Plastic inline unit,
Silent and Powerful backward curved centrifugal motor with thermal cut out.
Please select size below
PLEASE NOTE THIS ALSO "NOW" COMES WITH THE MOUNTING BRACKET....
EM 150L-E2M 01- Etamaster-150
£ 88.54
Ruck Inline Mixvent Fan - 150mm spigots
600m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket-
See Ruck Venti...
Jetflow Silent SJMF-S 150-1EC
£ 464.39
Jetflow Silent SJMF-S 150-1EC
• 3 standard sizes from 150mm
• Air volume flow rates up to 0.145 m3/s
• Static pressures up to 311 Pa
• Suitable for operating temperatures up to +60℃
...
Jetflow SJMF 150-1EC
£ 201.97
Inline mixed flow circular fans with EC motors for low power consumption at high performance.
High efficiency jet design double mixed flow impeller integrated and directly driven by Brushless EC mo...
Jetflow-HIT Metal inline - 150mm
£ 133.20
Jetflow-HIT 150mm Metal Inline Fan. Duty: 468 m3/hr. Motor power 62W. 3 speed fan
All metal in-line centrifugal fans which are ideally suited to a wide range of commercial and industrial applications...
K-M SILEO Metal Tube Fan series
£ 118.46
The K series is designed for installation in ducts. All the K-fans have minimum 25mm long spigot connections.
Speed-controllable
Integral thermal contacts
Can be installed in any position
Can be i...
LINEO 150 QUIET
£ 184.00
Mixed flow in-line fan with AC motors and low noise levels
Spigot size: 150mm
Max:
Airflow: 510m3/hr
Power Absorbed: 50W
Sound level: 30.7db radiated @ 3M.
• In-line mixed flow extractor f...
Metal Inline Fan - VENT-150NK
£ 103.88
150mm Inline duct fan.
700 m3/hr
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring ju...
Prio 150E2 circular duct fan
£ 234.99
• Speed-controllable
• Integral thermal contacts
• Can be installed in any position
• Compact design
• Low SFP values and high efficiency
• Low sound level
The prioAir series is de...
Ropera ILC/3M (150) Duct Fan - TF150001
£ 129.00
Ropera ILC/3M (150) Duct Fan - TF150001
Quiet and efficient inline duct fan
Low noise levels
Durable light weight construction
Quick installation
Due to its size and motor power, Ropera fans ar...
Ropera ILC/M (160) Duct Fan - TF160001
£ 135.00
Ropera ILC/M (160) Duct Fan - TF160001
Quiet and efficient inline duct fan
Low noise levels
Durable light weight construction
Quick installation
Due to its size and motor power, Ropera fans are...
RVK Sileo - Plastic tube extractor.
£ 102.23
The RVK series is designed for installation in ducts. The casing is manufactured from PA6 fibreglass reinforced plastic which gives the fan a less leckage casing. Duct connected wet room applications ...
S&P TD-500/150-160 SILENT ECOWATT
£ 533.28
S&P TD-500/150-160 SILENT ECOWATT Model,
Max Airflow - 545 m3/h
Motor Power - 39 Watts
Absorbed Current - 0.25 Amps
Weight - 6.0 Kgs
Temperature Range: -20*C up to + 40*C
IP Rating - IP44
Low p...
TD-SILENT 500/150
£ 234.76
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 150mm
Airflow: 550m3/hr
Power Absorbed: 59W
Sound level:22db radiated @ 3M
The S&P TD SILENT Series Inlin...
TD500 Mixvent - 150mm - TD500
£ 182.84
Soler & Palau TD500 Mixvent Series Inline Duct Fan - 150mm Inlet/ Outlet - Airflow 430/ 580m3/hr - 3 speed motor on both standard and timer versions.
The S&P MIXVENT-TD series of in-line duct fans ...
Vent Axia ACM 150 inline mixed flow duct fan
£ 241.88
A complete range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for ...
Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan
£ 203.18
A complete range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for ...
Displaying 1 to 18 (of 18 products)
1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x 7 Day Programmable TIMECLOCK2 x Elta - Room Sensor - Temp/Humid/C021 x Speed Controller - REB81 x QPTW 250C Acoustic Twin Fan with Controller1 x Transformer Speed Control - RTRE- 1.5Amp2 x DDMP 10-08 3F 2210W M6A4 DG01 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x CBM 9-9 550w 4P VR (Open Motor)2 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Elta 6 Amp Electronic single phase speed controller.3 x Speed Controller - REB161 x Compact SCD450/4-1AC3 x SAVE VSR 300 heat recovery unit1 x Speed Controller - REB2.5-N1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan4 x CBT-100N Centrifugal2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x LFBR 160 G4 - Helios Inline Filter Box - 160mm6 x ACO8AC/EC AutoChangeover panel1 x Contactor Interface Station - CI92 x Duct Termination with Mesh - 355mm2 x Electrostatic Precipitator - 1H x 3W2 x CO2 Room Sensor - CO2-R2 x Silentub - STUB 1006 x Helios RR-250-C Centrifugal inline fan5 x SPI-100 C Iris damper6 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR2 x TUNE-R-200-3-M2 - Control Damper3 x CSB-60 Centrifugal fan1 x CBM 12-12 1100w 6P Three Phase2 x Duct Termination with Mesh - 100mm1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-14 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011591 x AIRVENT speed control - AIR4019611 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH3 x HIMF - Mixed Flow Fan 100mm Inline Fan2 x Round ceiling diffuser 200mm2 x Round ceiling diffuser 250mm5 x Helios ESA-1 Surface mounted Speed Control 1amp3 x TD160-NT Mixvent - 100mm - TD160 Timer5 x CBA-100 Inlet Flange for CBT-1002 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C1 x CK-60F Kit2 x EBM-Papst D3G133-BF05-14 Double inlet4 x Flat Roof Terminal -OFT 5 - Asphalt2 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)5 x Duct Termination with Mesh - 450mm1 x Mini Diffuser - 100mm1 x DEF-CBM-RE-7 - Protection Guard2 x RD35S-4DW.6W.3L - 122297 (Three Phase)2 x CFI In-line 150 - Carbon Filter4 x DDMP 12-12 3F 5700W M6M0 DG73 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven4 x Helios HQW-355/4 - IP551 x SD-MUB Vibration pad set4 x Elta SCP400/4-1AC - IP552 x Duct Termination with Mesh - 150mm2 x Comefri - TLZ 450 R - High Performance Scroll Fan2 x 100mm Round Connector with Damper4 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan3 x CBB-60N Centrifugal5 x DDMP 10-10 1F 1000W M6A2 DA53 x VEKA INT 2000/15.0-L1 EKO3 x Duct Termination with Mesh - 250mm1 x Singleflow SSDL315-1EC2 x CCpro 40 (1CC9402) Long Casing Extension2 x DDMP 07/07 Mounting Flange3 x VTR 500 STD Filter Kit2 x Binks Bullows - Spray Booth Filter3 x DEF-140T Inlet Guard for the CBT-100N2 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Quietflow Twin SQTDCV250-1ECL5 x CBS-100 Outlet Flange for CBT-1002 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x DA9/9-NT4 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan2 x Flakt Woods ME 1.1 speed controller 1amp - EA9011571 x RDS 1 Helios Transformer Controller With Motor Protection1 x MTS10- extractor fan 3 step switch1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x DPD 12PM Delivery Surcharge1 x DS-2 2-Speed Switch (3 Phase)1 x 125mm Round Connector with Damper2 x KBA- Inlet Mounting 2252 x DDMP 12-09 1F 1800W M6A4 DA81 x Transformer Speed Control - RTRE- 5.0Amp3 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase2 x KAD-225-F400 Rectangle Flexible Connector2 x RUCK MTP 20, 10K, Speed control2 x Flakt Woods ME 1.3 speed controller 3amp - EA9011581 x FRQ5-4A V2 Inverter Speed Controller1 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Silent 300 CZ Design PLUS Extractor Fan1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x Speed Controller - REB1-N2 x Elta Variable Speed Drive IP66 - 4.0KW2 x ELTA - Three Phase Transformer 3amps1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x CBB-80N Centrifugal2 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x CBT-80N Centrifugal1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x Elta HXP 800mm 6-Pole (Three Phase)1 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan
Best sellers
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29
Unbelievable! With TDmixvent500: noise reduction minimum 50%...