• Model:Tectherm400

Insulated Aluminium Flexible Ducting - 10 Mtr - Tectherm400

£ 30.88 (excl. VAT)

£ 37.06 (inc. VAT)

This is a range of fully flexible thermally insulated ducting, which has been specially designed for the HVAC market. It has been developed to minimise the heat gain or loss resulting from the temperature differential between the airflow and the surrounding ambient air. The vapour barrier prevents condensation forming on the outside of ducts carrying air at lower temperatures than the surrounding air.

It is constructed with an inner duct with either 25mm fibreglass insulation and covered with an outer jacket, which acts as a vapour barrier. The jacket is a spirally produced multi-layer Aluminium/Polyester laminated fabric reinforced with a fibreglass yarn, which provides an outstanding combination of strength and tear resistance.
Commonly used for heat recovery units and when ducting through attics to avoid condensation building up as hot, moisture laden air suddenly cools.

• Supplied in standard 10 metre length, compressed to 1 metre
• Easy to connect to either round or oval ducting
• No special tools required for cutting or fixing
• In the event of a fire no toxic gases are emitted
• The products have been successfully tested for fire resistance and conforms to BS476 Parts 6, 7 & 20

Please note: This is NOT low quality eastern European ducting, commonly found elsewhere.
PDF Files


Data Sheet

Available Options

1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Access Door 450mm x 450mm1 x Elta Podded Silencer 1D- 710mm1 x Elta Wall Cowl SWC35/401 x Elta EC Electronic Controller1 x Cased Axial Fan Extension - 400mm dia1 x Helios GigaBox 560mm GBD 560/4/4 centrifugal1 x BDS 630/710 RA b/d shutter1 x Circular Ceiling Diffuser - TST 1601 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x CBMT/Q 150-15 1 HEATER KIT1 x EKHR 280-2SW BCMI1 x Acopel F400-355/1601 x Acopel F400-900/1801 x Etaline 710mm - D4 02 3 Phase1 x NON-STD FSD-TD Fire and Smoke Damper - 230V - 210mm x 100mm1 x Elta SLC800/4B-3AC - IP551 x Elta Turboflow-TF - 500mm(B) - Three phase1 x Direct AM Delivery Surcharge1 x AKOR Spare Filter1 x Jetflow-HIT Metal inline - 150mm1 x DEF-1000-AN1 x Soler & Palau TCBT/4-800/G - IP651 x ECO-500 Kitchen Extract Fan1 x Kitchen Grease Filter - Mesh Type Non standard 275mm x 180mm x 22mm1 x Elta Cased Axial Flange - 250mm1 x CBT-60N Centrifugal1 x Elta SLC560/2-3AC - IP551 x Soler & Palau TCBB/4-400/H - IP441 x HCFT/4-315mm (B-FLOW) plastic impeller plate fan1 x Frequency converter FU 075 14 - IP661 x CBMT/Q 315-90 3 HEATER KIT1 x Elta SLC500/2A-3AC - IP551 x EM 150L-E2M 01- Etamaster-1501 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Pre 10:30 Delivery Surcharge1 x Acoustic MiniBox Fan - MINI-BOX 1001 x CBM 7/7 147w 4P RE-VR1 x Jetflow-HIT Metal inline - 250mm1 x EBB-175 S DESIGN Centrifugal Extractor Fan1 x Belt Drive Cased Axial Fan - 800mm - L version1 x Soler & Palau HXM-300mm1 x Flat Roof Terminal -OFT 5 - Ashphalt1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x Capacitor 20uf for use with the EBM D2E range1 x Economy Airvent 150mm Fan With Pullcord & Shutters
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...