• Model:1815354

Kitchavent 3000 Odour control System

£ 4,429.00 (excl. VAT)

£ 5,314.80 (inc. VAT)

THIS MODEL IS described below:

This system can be operated at various contact times:
* 0.1 second : Duty Air Flow = 2.12m3/s, PD Clean=331Pa Dirty=437Pa

* 0.2 second : Duty Air Flow = 1.06m3/s, PD Clean=166Pa Dirty=407Pa

* 0.3 second : Duty Air Flow = 0.71m3/s, PD Clean=110Pa Dirty=377Pa

* 0.4 second : Duty Air Flow = 0.53m3/s, PD Clean=83Pa Dirty=347Pa

- Approx Dimensions : 688H x 1277W x 1182Dmm ( Including 40mm External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.

Customers also purchased...

2 x Elta Variable Speed Drive IP66 - 2.2KW1 x Frequency converter RUCK - FU 075 201 x FU 22 25 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 0.75KW1 x FRQ5-4A V2 Inverter Speed Controller1 x FU 075 52 Frequency Inverter (IP20)1 x Helios VDS-7 Three Phase Transformer 5-Step1 x FRQ-10A V2 Inverter Speed controller1 x Helios TSD 5.5 Transformer Speed Control (400v)1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Elta 10 Amp Electronic single phase speed controller.1 x FU 22 04 Frequency Inverter1 x Frequency converter RUCK - FU 075 211 x ELTA - Three Phase Transformer 10amps1 x FU 075 04 Frequency Inverter (IP20)1 x ELTA - Three Phase Transformer 3amps1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Elta Variable Speed Drive IP66 - 5.5KW2 x Elta Variable Speed Drive IP66 - 1.5KW1 x FRQ5-10A Inverter Speed controller1 x ELTA - Single Phase Transformer 2amps1 x EC6H - Reversible Group Fan Electronic Controller1 x Balance S Diffuser - NO RING - 125mm1 x NKS-D swirl diffuser v-300 x 300mm2 x Electronic extractor fan speed controller - FSC 1.51 x Curved Blade Grille 600x600 (2way blow)1 x ELTA - Single Phase Transformer 16amps1 x ELTA - Single Phase Transformer 8amps1 x Circular Ceiling Diffuser - TST 1001 x PCA Diffuser - PCA-3151 x Airvent ceiling fan controller1 x Elta 3 Amp Electronic single phase speed controller with TK1 x Elta 2 Amp Electronic single phase speed controller.1 x Circular Ceiling Diffuser - TST 1251 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Versio Square Ceiling Diffusers - RS141 x ELTA - Single Phase Transformer 4amps1 x Circular Ceiling Diffuser - TST 1601 x AIRVENT speed control - AIR4019612 x COM-31 x JSR 200 Painted RAL50181 x Circular Ceiling Diffuser - TST 2002 x EFSC-3N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 12amps1 x Elta 3 Amp Electronic single phase speed controller.2 x Elta 6 Amp Electronic single phase speed controller with TK1 x PCA Diffuser - PCA-2501 x Round ceiling diffuser 300mm1 x Balance S Diffuser - NO RING - 100mm1 x Elta 6 Amp Electronic single phase speed controller.2 x Round ceiling diffuser 200mm1 x Elta Variable Speed Drive IP66 - 0.75KW (1ph to 3ph)1 x EFSC-6N- Single Phase Speed Control1 x Round ceiling diffuser 350mm1 x Round ceiling diffuser 250mm1 x ELTA - Single Phase Transformer 10amps1 x Run On Timer - 5s - 4hrs - RT5A2 x Push Timer Switch - ZA42 x Remote Timer Control - 13511 x Helios ZNE Electronic Fan Overrun Timer2 x 7 Day Programmable TIMECLOCK2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp2 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x ACO 149-ACO1/EDV1 x EC-Vent control board1 x EM30-24 Electro-Mechanical Control Panel1 x CONTROL ECOWATT - Basic1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Systemair Save Connect 2.0 Internet Module1 x Elta ACO Panel 149-ACO18B1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EM30-24 Control Panel Commissioning Service1 x EC-Vent Room Unit1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x REB-CVF 0-10v Controller1 x Elta Louvre Shutter - 400mm1 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC25/311 x Elta Wall Cowl SWC45/501 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Elta Wall Cowl SWC35/401 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Jet Cowl - 315mm1 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CBA-100 Inlet Flange for CBT-1001 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 150 inline mixed flow duct fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Transformer 5 Speed Controller - ATC1-4TK1 x Transformer 5 Speed Controller - ATC1-12TK1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Helios TSW 1.5 Amp Transformer speed controller1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x BEAS-control module1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Envirovent G4 Filter - SL-G4/F71 x MWS 1.5 – Transformer Controller With Motor Protection1 x Vent Axia T-Series Controller1 x Speed Controller - REB51 x Transformer (silent) speed controller - RE 3.0 Amp1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Transformer (silent) speed controller - RE 5.0 Amp1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x MTP 10, 10K, Speed control1 x Silent 100 Window Kit - windowS1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x PIR Sensor - PIR21 x PIR Sensor - PIR41 x QPTW 250C Acoustic Twin Fan with Controller1 x MTS10- extractor fan 3 step switch1 x Speed Controller - REB11 x Elta - Room Sensor - Temp/Humid/C021 x Compact SCD450/4-1AC1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x CBT-100N Centrifugal1 x CO2 Room Sensor - CO2-R1 x Duct Termination with Mesh - 100mm1 x CFI In-line 150 - Carbon Filter1 x Quietflow Twin SQTDCV250-1ECL1 x RUCK MTP 20, 10K, Speed control1 x TG-K Duct temperature sensor1 x Multiflow SMB550/4-1AC1 x SAVE VSR 300 heat recovery unit1 x Contactor Interface Station - CI91 x VTR 500 STD Filter Kit1 x ACO3TO-ADS-VFC-7.1A1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Transformer 5 Speed Controller - ATC1-10TK1 x Helios TSW 7.5 Amp Transformer speed controller1 x Vent Axia ACM 100 inline mixed flow duct fan1 x DEF-140T Inlet Guard for the CBT-100N1 x RDH FLEX-SQUARE - ADH/RDH 04501 x Transformer (silent) speed controller - RE 1.5 Amp1 x REE-2 Electronic Speed Controller
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...