• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
6 x Electronic extractor fan speed controller - FSC 1.51 x EC-Vent Room Unit2 x MWS 1.5 – Transformer Controller With Motor Protection1 x Helios HQW-200/2 - IP553 x WS - Reversing Switch from Helios Fans1 x Envirovent G4 Filter - SL-G4/F71 x Elta ACO Panel 149-ACO18B1 x Systemair Save Connect 2.0 Internet Module2 x Transformer Speed Control - RTRE- 12.0Amp2 x Vent Axia T-Series Controller3 x Helios HQW-200/4 - IP552 x EC6H - Reversible Group Fan Electronic Controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5003 x Helios HQW-630/4 - IP554 x Transformer (silent) speed controller - RE 3.0 Amp2 x Transformer (silent) speed controller - RE 1.5 Amp1 x EM30-24 Control Panel Commissioning Service2 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6302 x TG-K3/NTC10-01 - Duct temperature sensor2 x Remote Timer Control - 13512 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x CBS-60 Outlet Flange for CSB/CBT-601 x TD Mixvent 800/200 EEXEIIT31 x Airvent ceiling fan controller1 x SG-200 Fan Guard for the HQW 2002 x Vent Axia Silent 100T (TIMER)1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x MTP 10, 10K, Speed control1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x EBM-Papst D4E225-BC01-17 Double inlet1 x Transformer 5 Speed Controller - ATC1-8TK1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Speed Controller - REB101 x Two Speed Switch - REGUL-2
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...