• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
1 x 204x60mm Insulated Rectangular Vertical 45° Bend2 x Helios HQW-200/4 - IP551 x Round ceiling diffuser 400mm1 x ENV 100 12v transformer SELV2 x Transformer (silent) speed controller - RE 3.0 Amp1 x Elta Variable Speed Drive IP66 - 5.5KW1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x KBA- inlet mounting flange for CRMT 2501 x WS - Reversing Switch from Helios Fans1 x GXC6EC - High Performance Extract Fan4 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x 204x60mm Insulated Rectangular Vertical 90° Bend2 x Electronic extractor fan speed controller - FSC 1.51 x Duct Termination with Mesh - 355mm1 x RD35S-4DW.6W.3L - 122297 (Three Phase)3 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Elta Variable Speed Drive IP66 - 0.75KW1 x TEM 075 - 5 Speed Transformer Speed Control1 x Remote Timer Control - 13512 x SG-200 Fan Guard for the HQW 2002 x TG-R room temperature sensor1 x Quietflow SQS400-1ECL - Centrifugal Box Fan2 x LFBR 160 G4 - Helios Inline Filter Box - 160mm1 x Helios RR-250-C Centrifugal inline fan1 x Speed Controller - REB101 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x RDH FLEX-SQUARE - ADH/RDH 04501 x Vent Axia Silent 100T (TIMER)1 x EBM-Papst D4E225-BC01-17 Double inlet1 x CK-60F Kit1 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x KAD-225-F400 Rectangle Flexible Connector1 x Helios HQW-315/4 - IP551 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x Helios HQW-355/4 - IP55
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...