The SPI is an iris damper for measuring and adjusting the air flow. The SPI has the following specifications: low noise level, centrically-formed air flow and fixed test points for precise measurement...
Plate mounted Atex rated three phase 10.5" fan, c/w Motor Side Guard.
MPN: 10.5FLPIIC3‐4PM+MS
Max Airflow: 1296 m3/hr.
Motor RPM: 1400 rpm
Atex Rating: II 2G Eexd IIC T4 IP56
Suitable for Gas ...
VORT HRW 40 MONO Evo HCS 'WIFI'
Code 12444
On-board controls
WIFI Module Included
Decentralised single room heat recovery unit
High efficiency, suitable for recessed installation (Nominal di...
SEL355/4-1AC
Standard size 355mm
Air volume flow rates up to 0.714 m3/s (AC)
Static pressures up to 264 Pa
Suitable for operating temperatures up to +80℃...
900mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 specification unless otherwise stated.
An alt...
The box blows out horizontal. The box is made out of saltwater- proofed aluminium with grille. The underframe is made up of electroplated, powder- coated steel- plate.Freewheeling radial impeller cons...
Product description:
Mellizo is an acoustic twin cabinet fan manufactured from galvanised steel sheet
and internally lined with 25mm thickness of fireproof acoustic insulation (M0).
All models inco...
450mm Shoed Un-Equal T-Piece
450-450-315mm
Galvanised T Joiner Ducting Fixture.
P/N - 884305
450mm is the size of the two end spigots, 315mm the single central spigot.
These are made to order a...
450mm Spiral end cap.
Up to 450mm they are both male and female for flexibility.
The male end will insert into spiral ducting, the female end will go over spigots or fittings....
JETLINE-150 ECOWATT
In-line fan for circular duct with low profile compact casing manufactured from galvanised sheet steel and rubber gasket on the flanges. High performance impeller, guide vane an...
Product description:
Mellizo is an acoustic twin cabinet fan manufactured from galvanised steel sheet
and internally lined with 25mm thickness of fireproof acoustic insulation (M0).
All models inco...
5124005900
Single inlet centrifugal fan manufactured from die cast aluminium and finished with a tough, grey colour, epoxy-ployester paint coating. Radial centrifugal impeller dinamically balanced. ...
The FDA series is DIDW centrifugal fans with forward curved impellers. The fans are suitable for supply or extract applications in commercial, process and industrial HVAC systems.
Sizes of this ser...