New Products

All the fans are manufactured from injection moulded plastic, fitted with neon light indicator and single phase 230V-50Hz, class B motor equipped with overload thermal protection. The “Z” versions...

355mm Spiral end cap. Up to 315mm they are both male and female for flexibility. The male end will insert into spiral ducting, the female end will go over spigots or fittings....

Universal Pipe Clip, suitable for use with PVC round ducting from sizes 100mm to 150mm. For installation guide click HERE...

Range of centrifugal roof mounted fans in vertical discharge format: - Very low profile design. - Bases manufactured from galvanised sheet steel. - Centrifugal backward curved impeller. - External...

Item Description: IRT/4-450 230/400V50HZ 560/160 N8 Phase - 3 Frequency (Hz) - 50 Poles - 4 Discharge diameter (mm) - 793 Fan speed (rpm) - 1381 Max Input Power (kW) - 2.36 Max abs cur...

CBM 10/8 6P 245W RE VR All models incorporate speed controllable external rotor motor, fitted with thermal protection and ball bearings Motors IP44, Class F (models 7/7 and 7/9). IP55, Class F (mo...

Roof mounted fan, 4 pole, 1400 rpm • Cowl and base complete with axial fan, 1000mm • Fan - three phase, 400V - 3Ph - 50Hz • Glass fibre cowl and base with soaker sheet • Complete with ...

PM24-TF, AC 24V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse For use with our FSD-TD fire and smoke dampers. 24 Volt DC/AC...

Helios VARD 355/2/2-TK...

Plate mounted Atex rated single phase 15" fan, c/w Motor Side Guard. MPN: 15FLPIIC1‐4PM+MS Max Airflow: 3636 m3/hr. Motor RPM: 1400 rpm Atex Rating: II 2G Eexd IIC T4 IP56 Suitable for Gas Gro...

Plate mounted Atex rated single phase 10.5" fan, c/w Motor Side Guard. MPN: 10.5FLPIIC1‐2PM+MS Max Airflow: 2196 m3/hr. Motor RPM: 2800 rpm Atex Rating: II 2G Eexd IIC T4 IP56 Suitable for Gas...

150mm Ducting 15° pressed bend, seam-welded and calibrated, without gasket....

355mm Curved boot...

CRMT Series Forward Curved Centrifugal Fan Range of single inlet direct drive centrifugal fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked) and suitable for t...

Used to fix 220 x 90 duct to a wall/ceiling. Clamps the 90mm side of the rectangular duct so needs one each side unless alternating.Please note this is sold a an individual product,...

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility. 315mm Spigot. Flow Rate: 3350 m3/hr Weather housings and also available making them suitable fo...

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility. 250mm Spigot. Flow Rate: 2730 m3/hr Weather housings and also available making them suitable fo...

NON-STD FSD-TD Fire and Smoke Damper - 230V - 204mm x 100mm...

TXTR/4-630 C Sickle Bladed Cased Axial Fan - 630mm...

Raptor SDA630/46-3AC The Raptor SDA is a short cased mounted axial fan and is normally mounted in ductwork applications. It incorporates the Ziehl-Abegg FE2owlet aerofoil profiled impeller. Both st...

225mm Spiral Duct Clamp Rapid Lock is designed for ease and speed in installation and dismantling of a duct system, the quick connect pull ring is ideally for most air applications 225mm fittings a...

The FDA series is DIDW centrifugal fans with forward curved impellers. The fans are suitable for supply or extract applications in commercial, process and industrial HVAC systems. Sizes of this ser...

• Acoustically treated housing, Class ‘O’ rated, sandwich construction selected for maximum noise absorption • Motors protected to IP44 • Motor insulation Class ‘B’ • Maximum operat...

• Acoustically treated housing, Class ‘O’ rated, sandwich construction selected for maximum noise absorption • Motors protected to IP44 • Motor insulation Class ‘B’ • Maximum operat...

TCBT/4-400/H EXEIIT3 ATEX...

Ducting jubilee clamps 60mm - 170mm...