New Products

Displaying 1 to 24 (of 3618 products)
RF3D-200/05 K516 S-2316  - Centrifugal Impeller & Motor
RF3D-200/05 K516 S-2316 - Centrifugal Impeller & Motor
£ 399.00
RF3D-200/05 K516 S-2316 - Centrifugal Impeller & Motor...
G4 duct Mounted Panel Filter - 435 x 435 x 47mm
G4 duct Mounted Panel Filter - 435 x 435 x 47mm
£ 17.49
G4 duct Mounted Panel Filter - 435 x 435 x 47mm For use with 400mm filter boxes...
**CTHT Kitchen/High Temp Roof Fan- 450mm**
**CTHT Kitchen/High Temp Roof Fan- 450mm**
£ 1,495.00 now £ 1,250.00
THREE PHASE Range of IP-55 centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (CE marked) (1) Also suitable for kit...
AL  1120 D6 03 - High Performance Long Cased Axial Fan
AL 1120 D6 03 - High Performance Long Cased Axial Fan
£ 5,495.00
AL 1120 D6 03 Part Num: 162711 Efficient IEC standard motor, efficiency class IE3, frequency controllable CFD optimized 3D impeller and 3D stator blades A stator downstream of the impeller incr...
CBP-15/15
CBP-15/15
£ 385.00
Complete low pressure centrifugal range with forward curved impeller. The range comprises different versions and sizes of double and single inlet fans. All these low pressure centrifugal fans are desi...
KD 200 L1 Circular duct fan
KD 200 L1 Circular duct fan
£ 445.00
• High efficiency – low noise • Speed-controllable • Integral thermal contacts • Can be installed in any position • Maintenance-free and reliable The KD series have external rotor mot...
Flanged Damper 019-0500-STD
Flanged Damper 019-0500-STD
£ 545.00
Flanged Damper 019-0500-STD Prevents reverse flow of air when fan is not operating Fixed directly to fan case flange Hot dip galvanised steel Galvanised steel butterfly type blades Suitable for...
HRB/6-710-30-BQC
HRB/6-710-30-BQC
£ 725.00
HRB/6-710-30-BQC Single phase axial fan without plate. Often used on generators, aircon units etc....
Ducting T Piece Equal - 180mm
Ducting T Piece Equal - 180mm
£ 27.75
180mm Ducting Equal T-Piece Vent tee piece built with a saddle or a fully pressed top section, all connections the same size....
Helios VARD 500/4/4-TK
Helios VARD 500/4/4-TK
£ 1,995.00
Helios VARD 500/4/4-TK...
ISOR 125 EC K 01 - Acoustic Inline EC fan.
ISOR 125 EC K 01 - Acoustic Inline EC fan.
£ 429.00
ISOR 125 EC K 01 Soundproof centrifugal fan with backward curved impeller Galvanized sheet steel housing Connection spigots with double lip seal Swing-out fan unit EC motor, external rotor, stepl...
Nicotra - PFP B3-0560 3F 5600W M6K7 BQE
Nicotra - PFP B3-0560 3F 5600W M6K7 BQE
£ 3,995.00
Nicotra - PFP B3-0560 3F 5600W M6K7 BQE...
Kitchen Extract Grille with Grease Filter - 595x595 - CEF - NO GRILL BOX
Kitchen Extract Grille with Grease Filter - 595x595 - CEF - NO GRILL BOX
£ 174.79
Ceiling Mounted Egg Crate Grille with Removable Mesh Type Grease Filter for Kitchen Extraction - 595 x 595 (SUITABLE for SUSPENDED CEILING TILE REPLACEMENT SO DOES NOT COME WITH FIXING HOLES. Please a...
HQD 450/4/4 TK  Plate Axial Fan (4-pole)
HQD 450/4/4 TK Plate Axial Fan (4-pole)
£ 1,049.00
HQD 450/4/4 TK Plate Axial Fan (4-pole)...
CA 315 MD E - Centrifugal Inline Duct Fan - 315mm
CA 315 MD E - Centrifugal Inline Duct Fan - 315mm
£ 125.00
• Pickled and phosphated steel housing with polyester powder-coated finish, resistant to the aggressive action of atmospheric agents. • Nominal diameter 315 mm. • 3 speed fan consisting of: ...
CA 250 MD E - Centrifugal Inline Duct Fan - 250mm
CA 250 MD E - Centrifugal Inline Duct Fan - 250mm
£ 102.00
• Pickled and phosphated steel housing with polyester powder-coated finish, resistant to the aggressive action of atmospheric agents. • Nominal diameter 250 mm. • 3 speed fan consisting of: ...
ACOAS-ADS Auto Changeover 8Amp
ACOAS-ADS Auto Changeover 8Amp
£ 236.25
S&P Auto-changeover controllers for dedicated control of twin fan units, incorporating a manual fan changeover and visual indication of fan operation/failure. This is the duty share (ADS) version. M...
DVN 560D4 IE2 roof fan
DVN 560D4 IE2 roof fan
£ 2,025.00
DVN 560D4 IE2 roof fan High efficient motor IE2 Speed-controllable via frequency converter Integral cold conductor (PTC) Standard motor outside the air stream Max temperatur...
VA 9/2 T  - High Temp Axial Fan,
VA 9/2 T - High Temp Axial Fan,
£ 45.00
Axial fans, VA series For Special Applications VA 9/2 T - High Temp Model 150*c 93mm Body, 60m3/hr, 15W Designed for: Operating conditions: - cooling of electronic control panels - ventila...
Helios ELS-VEB 100
Helios ELS-VEB 100
£ 225.00
Helios ELS-VEB 100 ELS FAN UNIT Centrifugal bathroom fan This unit has now been been superseded but this original version is still available in small quantities until stock expires....
150mm - 125mm Stainless Steel Ducting Reducer
150mm - 125mm Stainless Steel Ducting Reducer
£ 55.00
Ducting Reducers Short . Stainless Short Ducting Reducer Fixture. Available in many other sizes, ask for details. Please note these are for reducing and fitting inside ducting. To mount directly ...
315mm Stainless Steel Spiral Ducting - 1 Meters
315mm Stainless Steel Spiral Ducting - 1 Meters
£ 115.00
315mm Stainless Steel Spiral Ducting - 1 Meters Manufacture spiral, bends, tees and everything else out of 304 and 316 Grade stainless with the 2B finish. All of our stainless spiral and fitt...
250mm Stainless Steel Spiral Ducting - 1 Meter
250mm Stainless Steel Spiral Ducting - 1 Meter
£ 90.00
250mm Stainless Steel Spiral Ducting - 1 Meter Manufacture spiral, bends, tees and everything else out of 304 and 316 Grade stainless with the 2B finish. All of our stainless spiral and fitti...
Displaying 1 to 24 (of 3618 products)
0 items
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...